Bumblebee를 설치했는데 nvidia 드라이버가 올바르게 로드됩니다... 다음에서 볼 수 있습니다 /proc/drivers.
quux@quux-Ideapad-Z570 ~ $ cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86 Kernel Module 319.60 Wed Sep 25 13:58:16 PDT 2013
GCC version: gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu9)
quux@quux-Ideapad-Z570 ~ $
하지만 드라이버가 제대로 작동하지 않습니다. 304, 304 업데이트 및 319 업데이트를 시도했습니다.
통합형보다 훨씬 낮은 fps를 제공합니다. glmark2 벤치마크 도구는 Nvidia를 59점으로 평가하고 Intel을 통합했습니다 - 751!
실행하면 nvidia-xconfig optirun nvidia-settings라고 나옵니다 . 범블비 구성:You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just runas root), and restart the X server.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-319-updates
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-319-updates:/usr/lib32/nvidia-319-updates
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-319-updates/xorg,/usr/lib/xorg/modules
#XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
XorgConfFile=/etc/X11/xorg.conf
구성에서 볼 수 있듯이 nvidia-xconfigBumblebee xorg.conf.nvidia 대신에 생성된 xorg.conf를 사용하려고 시도했지만 결과는 동일합니다.
quux@quux-Ideapad-Z570 ~ $ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.108 (buildmeister@swio-display-x64-rhel04-07) Wed Jul
31 21:27:07 PDT 2013
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
그리고 꿀벌 구성:
quux@quux-Ideapad-Z570 ~ $ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "false"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
또한 bumblebeed -vv출력
quux@quux-Ideapad-Z570 ~ $ sudo bumblebeed -vv
[47743.879935] [DEBUG]Found card: 01:00.0 (discrete)
[47743.879966] [DEBUG]Found card: 00:02.0 (integrated)
[47743.879974] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[47743.880372] [INFO]Configured driver: nvidia
[47743.880387] [DEBUG]Skipping auto-detection, using configured driver 'nvidia'
[47743.880525] [DEBUG]Process /sbin/modprobe started, PID 9493.
[47743.880559] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[47743.969996] [DEBUG]SIGCHILD received, but wait failed with No child processes
[47743.970071] [DEBUG]bbswitch has been detected.
[47743.970080] [INFO]Switching method 'bbswitch' is available and will be used.
[47743.970087] [DEBUG]Active configuration:
[47743.970093] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[47743.970099] [DEBUG] X display: :8
[47743.970105] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-319-updates:/usr/lib32/nvidia-319-updates
[47743.970111] [DEBUG] Socket path: /var/run/bumblebee.socket
[47743.970117] [DEBUG] pidfile: /var/run/bumblebeed.pid
[47743.970123] [DEBUG] xorg.conf file: /etc/X11/xorg.conf
[47743.970129] [DEBUG] xorg.conf.d dir: /etc/bumblebee/xorg.conf.d
[47743.970134] [DEBUG] ModulePath: /usr/lib/nvidia-319-updates/xorg,/usr/lib/xorg/modules
[47743.970140] [DEBUG] GID name: bumblebee
[47743.970146] [DEBUG] Power method: auto
[47743.970151] [DEBUG] Stop X on exit: 1
[47743.970157] [DEBUG] Driver: nvidia
[47743.970163] [DEBUG] Driver module: nvidia-319-updates
[47743.970168] [DEBUG] Card shutdown state: 1
[47743.970297] [DEBUG]Process /sbin/modprobe started, PID 9494.
[47743.970330] [DEBUG]Hiding stderr for execution of /sbin/modprobe
[47743.976076] [DEBUG]SIGCHILD received, but wait failed with No child processes
[47743.976111] [DEBUG]Configuration test passed.
[47743.976870] [INFO]bumblebeed 3.2.1 started
[47743.977080] [INFO]Switching dedicated card OFF [bbswitch]
[47744.192239] [INFO]Initialization completed - now handling client requests
NVIDIA 설정 실행을 도와주세요
답변1
이 질문은 오래 전에 피를 흘리는 질문을 받았지만 이것은 나에게 효과적입니다: optirun nvidia-settings -c :8