ReAgentc: WinRE 부팅 구성 데이터를 업데이트할 수 없습니다.

ReAgentc: WinRE 부팅 구성 데이터를 업데이트할 수 없습니다.

Windows 10 Pro x64 v1909 업데이트 실패:
WinRE 문제로 인해 문제가 발생한 것 같습니다. PC를 재설정하려고 해도 오류가 발생합니다.

  • [실패]를 재설정하고 로 ReAgent.xml이동/복원 한 다음 [성공]을 실행하려고 시도했지만 다시 실행하면 비활성화된 것으로 표시되고 경로가 사라졌습니다.winre.wim%WinDir%\system32\Recoveryreagentc /enabled/infowinre.wim

ReAgentc /Info:

  •  Windows Recovery Environment (Windows RE) and system reset configuration Information:
    
     Windows RE status:         Disabled
     Windows RE location:
     Boot Configuration Data (BCD) identifier: 00000000-0000-0000-0000-000000000000
     Recovery image location:
     Recovery image index:      0
     Custom image location:
     Custom image index:        0
     ReAgentc: Operation Successful.
    

BCDedit /Enum all:

  •  Windows Boot Manager
     --------------------
     identifier              {bootmgr}
     device                  partition=\Device\HarddiskVolume1
     description             Windows Boot Manager
     default                 {current}
     resumeobject            {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
     displayorder            {current}
     timeout                 30
    
     Windows Boot Loader
     -------------------
     identifier              {current}
     device                  partition=C:
     path                    \Windows\system32\winload.exe
     description             Microsoft Windows 10 x64 Edition
     recoverysequence        {00000000-0000-0000-0000-000000000000}
     recoveryenabled         Yes
     osdevice                partition=C:
     systemroot              \Windows
     resumeobject            {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
     nocrashautoreboot       No
     lastknowngood           No
    
     Resume from Hibernate
     ---------------------
     identifier              {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
     device                  partition=C:
     path                    \Windows\system32\winresume.exe
     description             Microsoft Windows 10 x64 Edition
     inherit                 {resumeloadersettings}
     recoverysequence        {00000000-0000-0000-0000-000000000000}
     recoveryenabled         Yes
     filedevice              partition=C:
     filepath                \hiberfil.sys
     debugoptionenabled      No
    

ReAgentc /Enable로그 파일:

  •  10:37:08, Info        [ReAgentc] ------------------------------------------------------
     10:37:08, Info        [ReAgentc] -----Executing command line: reagentc  /?-----
     10:37:08, Info        [ReAgentc] ------------------------------------------------------
    
     10:37:08, Info        [ReAgentc] ------------------------------------------------------
     10:37:08, Info        [ReAgentc] -----Exiting command line: reagentc  /?, Error: 0-----
     10:37:08, Info        [ReAgentc] ------------------------------------------------------
    
     10:37:26, Info        [ReAgentc] ------------------------------------------------------
     10:37:26, Info        [ReAgentc] -----Executing command line: reagentc  /v-----
     10:37:26, Info        [ReAgentc] ------------------------------------------------------
    
     10:37:26, Info        [ReAgentc] ------------------------------------------------------
     10:37:26, Info        [ReAgentc] -----Exiting command line: reagentc  /v, Error: 87-----
     10:37:26, Info        [ReAgentc] ------------------------------------------------------
    
     10:40:00, Info        [ReAgentc] ------------------------------------------------------
     10:40:00, Info        [ReAgentc] -----Executing command line: reagentc  /info-----
     10:40:00, Info        [ReAgentc] ------------------------------------------------------
     10:40:00, Info        [ReAgentc] Enter WinReGetConfig
     10:40:00, Info        [ReAgentc] Parameters: configWinDir: NULL
     10:40:00, Info        [ReAgentc] WinRE config file path: C:\Windows\system32\Recovery\ReAgent.xml
     10:40:00, Info        [ReAgentc] Update enhanced config info is enabled.
     10:40:00, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:00, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:00, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
     10:40:00, Info        [ReAgentc] WinRE is staged
     10:40:00, Info        [ReAgentc] System is WimBoot: FALSE
     10:40:00, Info        [ReAgentc] Exit WinReGetConfig return value: 1, last error: 0x0
    
     10:40:00, Info        [ReAgentc] ------------------------------------------------------
     10:40:00, Info        [ReAgentc] -----Exiting command line: reagentc  /info, Error: 0-----
     10:40:00, Info        [ReAgentc] ------------------------------------------------------
    
     10:40:05, Info        [ReAgentc] ------------------------------------------------------
     10:40:05, Info        [ReAgentc] -----Executing command line: reagentc  /enable-----
     10:40:05, Info        [ReAgentc] ------------------------------------------------------
     10:40:05, Info        [ReAgentc] Enter WinRECheckGuid
     10:40:05, Info        [ReAgentc] Parameter: TargetOsGuid: : NULL 
     10:40:05, Info        [ReAgentc] Exit WinRECheckGuid return error code: 0x0
     10:40:05, Info        [ReAgentc] Enter WinReInstall
     10:40:05, Info        [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0
    
     10:40:05, Info        [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition
     10:40:05, Info        [ReAgentc] Enumerate and log all fixed partitions:
    
     10:40:05, Info        [ReAgentc] --Partition info--
     10:40:05, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2
     10:40:05, Info        [ReAgentc] Partition number: 2, offset: 576716800, free space: 299773304832, total space: 511531372544
     10:40:05, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0
     10:40:05, Info        [ReAgentc] MBR partition id: 0x7
     10:40:05, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
     10:40:05, Info        [ReAgentc] --Partition info--
     10:40:05, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1
     10:40:05, Info        [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128
     10:40:05, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0
     10:40:05, Info        [ReAgentc] MBR partition id: 0x7
     10:40:05, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
     10:40:05, Info        [ReAgentc] Get downlevel ReAgent config
     10:40:05, Info        [ReAgentc]  Downlevel config file path: \Recovery\ReAgentOld.xml
     10:40:05, Info        [ReAgentc]  Checking for downlevel WinRE installation.
     10:40:05, Info        [ReAgentc] First round search
     10:40:05, Info        [ReAgentc] Get ReAgent config
     10:40:05, Info        [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml
     10:40:05, Info        [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled
     10:40:05, Info        [ReAgentc] Update enhanced config info is enabled.
     10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:05, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
     10:40:05, Info        [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings
     10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues (WinRE)WinRE is already installed, setting BCD entry (winre location \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE)
     10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Failed to get WinRE GUID.
     10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Will fix the BCD entry.
     10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:05, Info        [ReAgentc] NOTE: WILL RETRY. We have to uninstall WinRE and retry because WinRE is installed but its BCD entry is not present.
     10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Copying Winre.wim from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE to staging location
     10:40:05, Info        [ReAgentc] winreCopyWIMBack moved WIM file from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE\ to C:\Windows\system32\Recovery\Winre.wim successfully!
     10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues we should retry because winre installation was changed.
     10:40:05, Error       [ReAgentc] failed to detect and fix winre issues, error:0x2
     10:40:05, Info        [ReAgentc] Exit WinReInstall return value: 0, last error: 0x2
     10:40:05, Error       [ReAgentc] failed to install winre: : 0x2
    
     10:40:05, Info        [ReAgentc] ------------------------------------------------------
     10:40:05, Info        [ReAgentc] -----Exiting command line: reagentc  /enable, Error: 2-----
     10:40:05, Info        [ReAgentc] ------------------------------------------------------
    
     10:40:08, Info        [ReAgentc] ------------------------------------------------------
     10:40:08, Info        [ReAgentc] -----Executing command line: reagentc  /enable-----
     10:40:08, Info        [ReAgentc] ------------------------------------------------------
     10:40:08, Info        [ReAgentc] Enter WinRECheckGuid
     10:40:08, Info        [ReAgentc] Parameter: TargetOsGuid: : NULL
     10:40:08, Info        [ReAgentc] Exit WinRECheckGuid return error code: 0x0
     10:40:08, Info        [ReAgentc] Enter WinReInstall
     10:40:08, Info        [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0
    
     10:40:08, Info        [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition
     10:40:08, Info        [ReAgentc] Enumerate and log all fixed partitions:
    
     10:40:08, Info        [ReAgentc] --Partition info--
     10:40:08, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2
     10:40:08, Info        [ReAgentc] Partition number: 2, offset: 576716800, free space: 300220190720, total space: 511531372544
     10:40:08, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0
     10:40:08, Info        [ReAgentc] MBR partition id: 0x7
     10:40:08, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000}
    
     10:40:08, Info        [ReAgentc] --Partition info--
     10:40:08, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1
     10:40:08, Info        [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128
     10:40:08, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0
     10:40:08, Info        [ReAgentc] MBR partition id: 0x7
     10:40:08, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
     10:40:08, Info        [ReAgentc] Get downlevel ReAgent config
     10:40:08, Info        [ReAgentc]  Downlevel config file path: \Recovery\ReAgentOld.xml
     10:40:08, Info        [ReAgentc]  Checking for downlevel WinRE installation.
     10:40:08, Info        [ReAgentc] First round search
     10:40:08, Info        [ReAgentc] Get ReAgent config
     10:40:08, Info        [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml
     10:40:08, Info        [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled
     10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
     10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2)
     10:40:08, Info        [ReAgentc] FindWinReSourceImageAndPartition No source winre.wim was specified.  Checking for a staged winre.wim.
     10:40:08, Info        [ReAgentc] FindWinReSourceImageAndPartition using winre.wim from C:\Windows\system32\Recovery
    
     10:40:08, Info        [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings
     10:40:08, Info        [ReAgentc] DetectAndFixWinReIssues nothing to do because winre is not enabled.
    
     10:40:08, Info        [ReAgentc] --Install on target OS step 3: check if we can keep winre.wim in the same partition if it is staged.
    
     10:40:08, Info        [ReAgentc] --Install on target OS step 4: check if we can put winre.wim in other partitions or create one if needed.
    
     10:40:08, Info        [ReAgentc] CanPutWinREOnOtherPartitions WinRE is not staged. Searching for a suitable partition for WinRE.
     10:40:08, Info        [ReAgentc] Entering FindTargetPartition
     10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
     10:40:08, Info        [ReAgentc]  Not allowed to repartition the disk
     10:40:08, Info        [ReAgentc] Start looping through each partition and initialize os partition, recovery partition and system partition for MBR
     10:40:08, Info        [ReAgentc]  Checking partition at offset 576716800, partition number: 2
     10:40:08, Info        [ReAgentc]  find OS partition
     10:40:08, Info        [ReAgentc]  Checking partition at offset 1048576, partition number: 1
     10:40:08, Info        [ReAgentc]  NOTE: find system partition and not OS partition for MBR
     10:40:08, Info        [ReAgentc] Complete looping through each partition
    
     10:40:08, Info        [ReAgentc] ----Search target partition option #1: try existing WinRE partition
    
     10:40:08, Info        [ReAgentc] ----Search target partition option #2: try first recovery partition
    
     10:40:08, Info        [ReAgentc] ----Search target partition option #3: try system partition for MBR
    
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 1048576, Free space: 541589504, Total space: 575664128}
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements Required free space: 831690241
     10:40:08, Warning     [ReAgentc] MeetPartitionRequirements Not enough free space req = 831690241 avail = 541589504 offset = 1048576
    
     10:40:08, Info        [ReAgentc] ----Search target partition option #4: try new recovery partition if allowed
    
     10:40:08, Info        [ReAgentc] ----Search target partition option #5: try target OS partition
    
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 576716800, Free space: 300220190720, Total space: 511531372544}
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121
     10:40:08, Info        [ReAgentc] MeetPartitionRequirements Required free space: 52428800
     10:40:08, Info        [ReAgentc] Found target partition: use target OS partition, offset: 576716800
     10:40:08, Info        [ReAgentc] Exit FindTargetPartition returns with status code: 0x0
    
     10:40:08, Info        [ReAgentc] --Install on target OS step 5: set WinRE settings and restore system to a good state when hitting any errors
     10:40:08, Info        [ReAgentc] Enter SetWinRESettings
     10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
     10:40:08, Info        [ReAgentc] Copying WinRE from C:\Windows\system32\Recovery to staging location on \\?\GLOBALROOT\device\harddisk0\partition2
     10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
     10:40:08, Info        [ReAgentc] Copied WinRE to staging location
     10:40:08, Info        [ReAgentc] Creating BCD entry
     10:40:08, Error       [ReAgentc] BcdGetElementData failed: 0xc0000225
     10:40:08, Info        [ReAgentc] WinRE created BCD entry: : {00000000-0000-0000-0000-000000000000} 
     10:40:08, Info        [ReAgentc] Moving Winre and boot.sdi from staging location to target
     10:40:08, Info        [ReAgentc] Moved Winre and boot.sdi from staging location to target
     10:40:08, Info        [ReAgentc] Updating reagent.xml
     10:40:08, Info        [ReAgentc] Set WinRE location path to: \Recovery\WindowsRE
     10:40:08, Info        [ReAgentc] Set recovery guid
     10:40:08, Info        [ReAgentc] Set scheduled operation: WinReNoOperation
     10:40:08, Info        [ReAgentc] Set OS build version: 17763.1.amd64fre.rs5_release.180914-1434
     10:40:08, Info        [ReAgentc] Set Wimboot state: 0
     10:40:08, Info        [ReAgentc] Set install state to: enabled
     10:40:08, Info        [ReAgentc] Setting the recovery sequence for the target OS.
     10:40:08, Info        [ReAgentc] Machine firmware is not EFI, nothing to do
     10:40:08, Info        [ReAgentc] Creating backup of reagent.xml
     10:40:08, Info        [ReAgentc] Created backup of reagent.xml
     10:40:08, Info        [ReAgentc] Configuring the WinRE validation task.
     10:40:08, Info        [ReAgentc] Failed to clear WIM file trusted state: 0x2
     10:40:08, Info        [ReAgentc] Failed to clear WIM file hash: 0x2
     10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
     10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
     10:40:08, Info        [ReAgentc] Failed to find winre.wim because WinRE is not installed.
     10:40:08, Info        [ReAgentc] WinReValidateRecoveryWimInternal took 16 ms.
     10:40:08, Warning     [ReAgentc] WinReValidateRecoveryWimInternal failed: 0x490
     10:40:08, Warning     [ReAgentc] winreConfigureValidationTask failed: 0x490, a non critical error
     10:40:08, Info        [ReAgentc] Completed the WinRE validation task.
     10:40:08, Info        [ReAgentc] Creating backup of customization file
     10:40:08, Warning     [ReAgentc] Recovery file not found at C:\Windows\system32\Recovery\ReCustomization.xml
     10:40:08, Warning     [ReAgentc] winreBackupRecoveryFile (C:\Windows\system32\Recovery\ReCustomization.xml, ReCustomization.xml) failed, Err: 2
     10:40:08, Info        [ReAgentc] Created backup of customization file
     10:40:08, Info        [ReAgentc] SetWinRESettings return with error code 0x0
     10:40:08, Info        [ReAgentc] WinReInstallOnTargetOSInternal WinRE installation completed successfully.
     10:40:08, Info        [ReAgentc] Exit WinReInstall return value: 1, last error: 0x0
     10:40:08, Info        [ReAgentc] Enter WinReSetConfig
     10:40:08, Info        [ReAgentc] Parameters: configWinDir: NULL
     10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
     10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
     10:40:08, Info        [ReAgentc] WinRE is not installed, nothing to back up
     10:40:08, Info        [ReAgentc] Exit WinReSetConfig return value: 1, last error: 0x0
     10:40:08, Info        [ReAgentc] Clear non critical error when enabling auto repair
    
     10:40:08, Info        [ReAgentc] ------------------------------------------------------
     10:40:08, Info        [ReAgentc] -----Exiting command line: reagentc  /enable, Error: 0-----
     10:40:08, Info        [ReAgentc] ------------------------------------------------------
    
     10:42:05, Info        [ReAgentc] ------------------------------------------------------
     10:42:05, Info        [ReAgentc] -----Executing command line: reagentc  /info-----
     10:42:05, Info        [ReAgentc] ------------------------------------------------------
     10:42:05, Info        [ReAgentc] Enter WinReGetConfig
     10:42:05, Info        [ReAgentc] Parameters: configWinDir: NULL
     10:42:05, Info        [ReAgentc] WinRE config file path: C:\Windows\system32\Recovery\ReAgent.xml
     10:42:05, Info        [ReAgentc] Update enhanced config info is enabled.
     10:42:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
     10:42:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
     10:42:05, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
     10:42:05, Info        [ReAgentc] System is WimBoot: FALSE
     10:42:05, Info        [ReAgentc] Exit WinReGetConfig return value: 1, last error: 0x0
    
     10:42:05, Info        [ReAgentc] ------------------------------------------------------
     10:42:05, Info        [ReAgentc] -----Exiting command line: reagentc  /info, Error: 0-----
     10:42:05, Info        [ReAgentc] ------------------------------------------------------
    

답변1

/OSguid해결 방법은 Windows 복구 환경 또는 Windows 이력서 응용 프로그램이 아닌 Windows 부팅 관리자와 함께 Windows 부팅 로더를 사용하는 것입니다 .

ReAgentc /Enable /OSguid {GUID}
  • 귀하의 GUID는 다음과 같이 나열되어 있으므로 {current}다음을 실행하면 GUID가 제공되며 이를 활성화해도 괜찮습니다.
    BCDedit /V /Enum all
    

답변2


WinRE는 시스템 파티션이나 부팅 파티션[BIOS]에 저장하면 안 됩니다. 두 파티션 중 하나에 문제가 발생할 경우 복구를 위한 부팅을 방해하기 때문입니다.


기본값winre.wim위치는아니다 %WinDir%\system32\Recovery:

  • 바이오스: (WinRE는 자체 파티션에 있어야 합니다. -오직Windows 10 새로 설치하면 됩니다)
    • 윈도우 ≥10: \\WinRE_partition\Recovery\WindowsRE
      (업그레이드: C:\Recovery\WindowsRE)
    • 윈도우 ≤8.1: C:\Recovery\WindowsRE
  • UEFI: \\WinRE_partition\Recovery\WindowsRE

해결 방법: #2 또는 #3:(ReAgentc)

  1. 열기관리자단말기: WinKey+R열려 있는: powershellCTRL+SHIFT+좋아요
  2. winre.wim다음 경로 내에 있는지 확인 C:\Recovery\WindowsRE하고 올바른 경로를 설정하세요.
    ReAgentc /Disable ; ReAgentC /SetREimage /Path "C:\Recovery\WindowsRE" ; ReAgentc /Enable ; ReAgentc /Info
    

    -- 또는 --

  3. WinRE를 자체 파티션으로 이동합니다.
    1. 백업 전류 winre.wim:
      1. 존재하는지 확인하십시오 C:\Windows\System32\Recovery\WinRE.wim.
        Ls "C:\Windows\System32\Recovery" | FindStr /I "WinRE.wim" ; ls "C:\Windows\System32\Recovery" -Hidden | FindStr /I "WinRE.wim"
        
      2. 그렇지 않은 경우:
        Xcopy /H "C:\Recovery\WindowsRE\WinRE.wim" "C:\Windows\System32\Recovery"
        
        • 바이오스:부팅 파티션에 WinRE를 저장할 수 있음: 부팅 마운트 Y:→ WIM 경로 업데이트

    2. 650MB WinRE 파티션을 생성합니다: WinKey+R열려 있는:DiskPart→ 확인
      ::# WinRE partition should have ~300MB free for future winre.wim size increases
      
      ::# Select OS partition: 
      sel vol c
      
      ::# Shrink partition by 665MB [RAW]:
      shrink desired=665 minimum=650
      
      ::# Create WinRE partition:
      
        ::# BIOS:
        cre par pri size=665 id=27
      
        ::# UEFI:
        cre par pri size=665 id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
        gpt attributes=0x8000000000000001
      
      ::# Format partition:
      format fs=ntfs quick label=WinRE
      
      ::# Mount partition:
      assign letter=z
      
      exit
      

    3. WinRE를 비활성화하고 의 사용자 지정 위치를 설정한 winre.wim후 WinRE를 다시 활성화합니다.
      # Copy WinRE.wim:
        MkDir "Z:\Recovery\WindowsRE" ; Xcopy /H "C:\Recovery\WindowsRE\WinRE.wim" "Z:\Recovery\WindowsRE"
      
      # Disable WinRE:
        ReAgentC /Disable
      
      # Set Custom WinRE Path:
        ReAgentC /SetREimage /Path "Z:\Recovery\WindowsRE"
      
      # Enable WinRE:
        ReAgentC /Enable
      
      # Verify:
        ReAgentC /Info
      
      # Remove WinRE mount point:
        DiskPart
          sel vol z
          remove
          exit
      


반대 투표를 초래한 실제로 부정확한 오해를 해결하려면 다음을 수행하세요.

  • 이 답변이나 OP의 질문은BCD 스토어:
    OP의 문제는 기본 winre.wim위치가 아니라는 것입니다.%WinDir%\system32\Recovery

관련 정보