IETE 연구 저널 라텍스 템플릿을 갖고 있는 사람이 있습니까? 라텍스 템플릿을 찾지 못했습니다. 지침을 따르기 위해 라텍스 템플릿을 어떻게 사용합니까? 도와주세요.
답변1
IETE 연구 저널에 제출하려면 파일만 필요합니다 .pdf. 따라서 표준 article클래스를 사용할 수 있습니다. 귀하의 논문이 출판 승인을 받으면 나머지 사항(스타일 요구 사항)은 편집실에서 처리됩니다.
하지만 을 사용하고 싶다면 대부분의 스타일 요구 사항을 충족하도록 파일을 LaTeX template편집했습니다 . 와 를 모두 폴더에 넣고 종이를 준비하세요..clsIETE journal of ResearchIETEJR.clstemplate.tex
template.tex
\documentclass[twocolumn]{IETEJR}
\begin{document}
\title{Template for submission of papers to IETE Journal of Research}
\author{ First A. Author, Second B. Author, Jr., and Third C. Author\\
\vspace*{0.05em}\\\small F. A. Author is with the National Institute of Standards and Technology,\\\small Boulder, CO 80305 USA (corresponding author to provide phone: 303-555-5555;\\\small fax: 303-555-5555; e-mail: author@ boulder.nist.gov). \\
\small S. B. Author, Jr., was with Rice University, Houston, TX 77005 USA.\\\small He is now with the Department of Physics, Colorado State University,\\\small Fort Collins, CO 80523 USA (e-mail: [email protected]).\\
\small T. C. Author is with the Electrical Engineering Department,\\\small University of Colorado, Boulder, CO 80309 USA, on leave from the \\\small National Research Institute for Metals,\\\small Tsukuba, Japan (e-mail: [email protected]).}
\twocolumn[
\begin{@twocolumnfalse}
\maketitle
\begin{abstract}
Fill the text from your manuscript in different sections. ...
\end{abstract}
\begin{keywords}
About six to fifteen key words or phrases in alphabetical order, separated by commas. For a list of suggested keywords, visit http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt
\end{keywords}
\end{@twocolumnfalse}
]
\section{INTRODUCTION}
Fill the text from your manuscript
\section{SECTION TWO}
\subsection{Sub-section Head Style}
Fill the text from your manuscript
\subsubsection{Subsubsection Heading Here}
Fill the text from your manuscript
\subsubsection{Subsubsection Heading Here}
Fill the text from your manuscript in different sections.
\subsection{Subsection Heading Here}
Fill the text from your manuscript in different sections.
\section{CONCLUSION}
The conclusion goes here.
%\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
\section{}
Appendix two text goes here.
% use section* for acknowledgement
\section*{ACKNOWLEDGMENT}
The authors would like to thank...
\begin{thebibliography}{00}
\bibitem{1}R. Roy, and T. Kailath, “ESPRIT\_estimation of signal parameters via rotational invariance techniques,” IEEE Trans. Acoust. Speech Signal Process, Vol. 37, no. 7, pp. 984-95, Jul. 1989.
\bibitem{2} V. Wowk, Machinery Vibration, Measurement and Analysis. New York: McGraw-Hill, 1991.
\bibitem{3} Case Western Reserve University Bearing Data Center. Available: http://csegroups.case.edu/bearingdatacenter/pa\\ges/downloaddata-file, accessed Apr. 2013.
\bibitem{4} B. Li, M.-Y. Chow, Y. Tipsuwan, and J. C. Hung, “Neural network based motor rolling bearing fault diagnosis,” IEEE Trans. Ind. Electron.,Vol. 47, no. 5, pp. 1060\_9, Oct. 2000.
\bibitem{5} J. Altmann, and J. Mathew, “Multiple band-pass autoregressive demodulation for rolling element bearing fault diagnosis,” Mech. Syst. Signal Process., Vol. 15, no. 5, pp. 963\_77, Sep. 2001.
\bibitem{6} B. Samanta, and K. R. Al-Balushi, “Artificial neural network based fault diagnostics of rolling element bearings using time domain features,” Mech. Syst. Signal Process., Vol. 17, no. 2, pp. 317\_28, Mar. 2003.
\bibitem{7} B. S. Yang, T. Han, and J. L. An, “ART\_KOHONEN neural network for fault diagnosis of rotating machinery,” Mech. Syst. Signal Process., Vol. 18, no. 3, pp. 645\_57, May 2004.
\bibitem{8} L. Zhang, L. B. Jack, and A. K. Nandi, “Fault detection using genetic programming,” Mech. Syst. Signal Process., Vol. 19, no. 2, pp. 271\_89, Mar. 2005.
\bibitem{9} A. Saxena, and A. Saad, “Evolving an artificial neural network classifier for condition monitoring of rotating mechanical systems,” Appl. Soft Computer., Vol. 7, no. 1, pp. 441\_54, Jan. 2007.
\bibitem{10} B. Zhang, C. Sconyers, C. Byington, R. Patrick, M. Orchard, and G. Vachtsevanos, “A probabilistic fault detection approach: Application to bearing fault detection,” IEEE Trans. Ind. Electron., Vol. 58, no. 5,
pp. 2011\_8, May 2011.
\bibitem{11} Y. Jianbo, “Local and nonlocal preserving projection for bearing defect classification and performance assessment,” IEEE Trans. Ind. Electron., Vol. 59, no. 5, pp. 2363\_76, May 2012.
\bibitem{12} M. D. Prieto, G. Cirrincione, A. G Espinosa, J. A. Ortega, and H. Henao, “Bearing fault detection by a novel condition-monitoring scheme based on statistical-time features and neural networks,”IEEE Trans. Ind. Electron., Vol. 60, no. 8, pp. 3398\_407, Aug. 2013.
\end{thebibliography}
\section*{Note}\bf\large Manuscript length should be limited up to 10 pages including figures, tables, references, author’s bio and photo etc. After final checks, if the typeset manuscript exceeds 06 pages length, the author will be charged (after 06) per page @ Rs.1,000/- (for Indian Authors) and 50 USD (for Foreign Authors).
\end{document}
파일 IETEJR.cls은
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}[1995/12/01]
\ProvidesClass{IETEJR}[2016/02/09 V1.0 by Litun John]
%\LoadClass[twocolumn]{article}
\newcommand\@ptsize{}
\newif\if@restonecol
\newif\if@titlepage
\@titlepagefalse
\if@compatibility\else
\DeclareOption{a4paper}
{\setlength\paperheight {297mm}%
\setlength\paperwidth {210mm}}
\DeclareOption{a5paper}
{\setlength\paperheight {210mm}%
\setlength\paperwidth {148mm}}
\DeclareOption{b5paper}
{\setlength\paperheight {250mm}%
\setlength\paperwidth {176mm}}
\DeclareOption{letterpaper}
{\setlength\paperheight {11in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{legalpaper}
{\setlength\paperheight {14in}%
\setlength\paperwidth {8.5in}}
\DeclareOption{executivepaper}
{\setlength\paperheight {10.5in}%
\setlength\paperwidth {7.25in}}
\DeclareOption{landscape}
{\setlength\@tempdima {\paperheight}%
\setlength\paperheight {\paperwidth}%
\setlength\paperwidth {\@tempdima}}
\fi
\if@compatibility
\renewcommand\@ptsize{0}
\else
\DeclareOption{10pt}{\renewcommand\@ptsize{0}}
\fi
\DeclareOption{11pt}{\renewcommand\@ptsize{1}}
\DeclareOption{12pt}{\renewcommand\@ptsize{2}}
\if@compatibility\else
\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
\fi
\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
\DeclareOption{draft}{\setlength\overfullrule{5pt}}
\if@compatibility\else
\DeclareOption{final}{\setlength\overfullrule{0pt}}
\fi
\DeclareOption{titlepage}{\@titlepagetrue}
\if@compatibility\else
\DeclareOption{notitlepage}{\@titlepagefalse}
\fi
\if@compatibility\else
\DeclareOption{onecolumn}{\@twocolumnfalse}
\fi
\DeclareOption{twocolumn}{\@twocolumntrue}
\DeclareOption{leqno}{\input{leqno.clo}}
\DeclareOption{fleqn}{\input{fleqn.clo}}
\DeclareOption{openbib}{%
\AtEndOfPackage{%
\renewcommand\@openbib@code{%
\advance\leftmargin\bibindent
\itemindent -\bibindent
\listparindent \itemindent
\parsep \z@
}%
\renewcommand\newblock{\par}}%
}
\ExecuteOptions{letterpaper,10pt,oneside,onecolumn,final}
\ProcessOptions
\input{size1\@ptsize.clo}
\setlength\lineskip{1\p@}
\setlength\normallineskip{1\p@}
\renewcommand\baselinestretch{}
\setlength\parskip{0\p@ \@plus \p@}
\@lowpenalty 51
\@medpenalty 151
\@highpenalty 301
\setcounter{topnumber}{2}
\renewcommand\topfraction{.7}
\setcounter{bottomnumber}{1}
\renewcommand\bottomfraction{.3}
\setcounter{totalnumber}{3}
\renewcommand\textfraction{.2}
\renewcommand\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\renewcommand\dbltopfraction{.7}
\renewcommand\dblfloatpagefraction{.5}
\if@twoside
\def\ps@headings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markboth {\MakeUppercase{%
\ifnum \c@secnumdepth >\z@
\thesection\quad
\fi
##1}}{}}%
\def\subsectionmark##1{%
\markright {%
\ifnum \c@secnumdepth >\@ne
\thesubsection\quad
\fi
##1}}}
\else
\def\ps@headings{%
\let\@oddfoot\@empty
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\markboth
\def\sectionmark##1{%
\markright {\MakeUppercase{%
\ifnum \c@secnumdepth >\m@ne
\thesection\quad
\fi
##1}}}}
\fi
\def\ps@myheadings{%
\let\@oddfoot\@empty\let\@evenfoot\@empty
\def\@evenhead{\thepage\hfil\slshape\leftmark}%
\def\@oddhead{{\slshape\rightmark}\hfil\thepage}%
\let\@mkboth\@gobbletwo
\let\sectionmark\@gobble
\let\subsectionmark\@gobble
}
\if@titlepage
\newcommand\maketitle{\begin{titlepage}%
\let\footnotesize\small
\let\footnoterule\relax
\let \footnote \thanks
\null\vfil
\vskip 60\p@
\begin{center}%
{\LARGE \@title \par}%
\vskip 3em%
{\large
\lineskip .75em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1.5em%
{\large \@date \par}% % Set date in \large size.
\end{center}\par
\@thanks
\vfil\null
\end{titlepage}%
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\else
\newcommand\maketitle{\par
\begingroup
\renewcommand\thefootnote{\@fnsymbol\c@footnote}%
\def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
\long\def\@makefntext##1{\parindent 1em\noindent
\hb@[email protected]{%
\hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
\if@twocolumn
\ifnum \col@number=\@ne
\@maketitle
\else
\twocolumn[\@maketitle]%
\fi
\else
\newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle
\fi
\thispagestyle{plain}\@thanks
\endgroup
\setcounter{footnote}{0}%
\global\let\thanks\relax
\global\let\maketitle\relax
\global\let\@maketitle\relax
\global\let\@thanks\@empty
\global\let\@author\@empty
\global\let\@date\@empty
\global\let\@title\@empty
\global\let\title\relax
\global\let\author\relax
\global\let\date\relax
\global\let\and\relax
}
\def\@maketitle{%
\newpage
\null
\vskip 2em%
\begin{center}%
\let \footnote \thanks
{\LARGE \bfseries\@title \par}%
\vskip 1.5em%
{\large
\lineskip .5em%
\begin{tabular}[t]{c}%
\@author
\end{tabular}\par}%
\vskip 1em%
{\large \@date}%
\end{center}%
\par
\vskip 1.5em}
\fi
\setcounter{secnumdepth}{3}
\newcounter {part}
\newcounter {section}
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
\renewcommand \thepart {\@Roman\c@part}
\renewcommand \thesection {\@arabic\c@section.}
\renewcommand\thesubsection {\thesection\@arabic\c@subsection}
\renewcommand\thesubsubsection{\thesubsection.\@arabic\c@subsubsection}
\renewcommand\theparagraph {\thesubsubsection\@arabic\c@paragraph}
\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
\newcommand\part{\par
\addvspace{4ex}%
\@afterindentfalse
\secdef\@part\@spart}
\def\@part[#1]#2{%
\ifnum \c@secnumdepth >\m@ne
\refstepcounter{part}%
\addcontentsline{toc}{part}{\thepart\hspace{1em}#1}%
\else
\addcontentsline{toc}{part}{#1}%
\fi
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\ifnum \c@secnumdepth >\m@ne
\Large\bfseries \partname~\thepart
\par\nobreak
\fi
\huge \bfseries #2%
\markboth{}{}\par}%
\nobreak
\vskip 3ex
\@afterheading}
\def\@spart#1{%
{\parindent \z@ \raggedright
\interlinepenalty \@M
\normalfont
\huge \bfseries #1\par}%
\nobreak
\vskip 3ex
\@afterheading}
\newcommand\section{\@startsection {section}{1}{\z@}%
{-3.5ex \@plus -1ex \@minus -.2ex}%
{1.3ex \@plus.2ex}%
{\normalfont\Large\bfseries}}
\newcommand\subsection{\@startsection{subsection}{2}{\z@}%
{-3.25ex\@plus -1ex \@minus -.2ex}%
{1.0ex \@plus .2ex}%
{\normalfont\large\bfseries}}
\newcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}%
{-2.25ex\@plus -1ex \@minus -.2ex}%
{1.0ex \@plus .2ex}%
{\normalfont\normalsize\itshape}}
\newcommand\paragraph{\@startsection{paragraph}{4}{\z@}%
{3.25ex \@plus1ex \@minus.2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\newcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}%
{3.25ex \@plus1ex \@minus .2ex}%
{-1em}%
{\normalfont\normalsize\bfseries}}
\if@twocolumn
\setlength\leftmargini {2em}
\else
\setlength\leftmargini {2.5em}
\fi
\leftmargin \leftmargini
\setlength\leftmarginii {2.2em}
\setlength\leftmarginiii {1.87em}
\setlength\leftmarginiv {1.7em}
\if@twocolumn
\setlength\leftmarginv {.5em}
\setlength\leftmarginvi {.5em}
\else
\setlength\leftmarginv {1em}
\setlength\leftmarginvi {1em}
\fi
\setlength \labelsep {.5em}
\setlength \labelwidth{\leftmargini}
\addtolength\labelwidth{-\labelsep}
\@beginparpenalty -\@lowpenalty
\@endparpenalty -\@lowpenalty
\@itempenalty -\@lowpenalty
\renewcommand\theenumi{\@arabic\c@enumi}
\renewcommand\theenumii{\@alph\c@enumii}
\renewcommand\theenumiii{\@roman\c@enumiii}
\renewcommand\theenumiv{\@Alph\c@enumiv}
\newcommand\labelenumi{\theenumi.}
\newcommand\labelenumii{(\theenumii)}
\newcommand\labelenumiii{\theenumiii.}
\newcommand\labelenumiv{\theenumiv.}
\renewcommand\p@enumii{\theenumi}
\renewcommand\p@enumiii{\theenumi(\theenumii)}
\renewcommand\p@enumiv{\p@enumiii\theenumiii}
\newcommand\labelitemi{\textbullet}
\newcommand\labelitemii{\normalfont\bfseries \textendash}
\newcommand\labelitemiii{\textasteriskcentered}
\newcommand\labelitemiv{\textperiodcentered}
\newenvironment{description}
{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
{\endlist}
\newcommand*\descriptionlabel[1]{\hspace\labelsep
\normalfont\bfseries #1}
\if@titlepage
\newenvironment{abstract}{%
\titlepage
\null\vfil
\@beginparpenalty\@lowpenalty
%\begin{center}%
\bfseries \abstractname
\@endparpenalty\@M
% \end{center}}%
{\par\vfil\null\endtitlepage}
\else
\newenvironment{abstract}{%
\if@twocolumn
\section*{\abstractname}%
\else
\small
%\begin{center}%
{\bfseries \abstractname\vspace{-.2em}\vspace{\z@}}%
% \end{center}%
\quotation
\fi}
%{\if@twocolumn\else\endquotation\fi}
\fi
\newenvironment{verse}
{\let\\\@centercr
\list{}{\itemsep \z@
\itemindent -1.5em%
\listparindent\itemindent
\rightmargin \leftmargin
\advance\leftmargin 1.5em}%
\item\relax}
{\endlist}
\newenvironment{quotation}
{\list{}{\listparindent 1.5em%
\itemindent \listparindent
\rightmargin \leftmargin
\parsep \z@ \@plus\p@}%
\item\relax}
{\endlist}
\newenvironment{quote}
{\list{}{\rightmargin\leftmargin}%
\item\relax}
{\endlist}
\if@compatibility
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\z@
}%
{\if@restonecol\twocolumn \else \newpage \fi
}
\else
\newenvironment{titlepage}
{%
\if@twocolumn
\@restonecoltrue\onecolumn
\else
\@restonecolfalse\newpage
\fi
\thispagestyle{empty}%
\setcounter{page}\@ne
}%
{\if@restonecol\twocolumn \else \newpage \fi
\if@twoside\else
\setcounter{page}\@ne
\fi
}
\fi
%keywords
\def\keywords{\par\addvspace\medskipamount{\rightskip=0pt plus1cm
\def\and{\ifhmode\unskip\nobreak\fi\
}\noindent\keywordname\enspace\ignorespaces \par}}
\def\keywordname{{\bfseries Keywords:}}
\newcommand\appendix{\par
\setcounter{section}{0}%
\setcounter{subsection}{0}%
\renewcommand\thesection{\@Alph\c@section}}
\setlength\arraycolsep{5\p@}
\setlength\tabcolsep{6\p@}
\setlength\arrayrulewidth{.4\p@}
\setlength\doublerulesep{2\p@}
\setlength\tabbingsep{\labelsep}
\skip\@mpfootins = \skip\footins
\setlength\fboxsep{3\p@}
\setlength\fboxrule{.4\p@}
\renewcommand \theequation {\@arabic\c@equation}
\newcounter{figure}
\renewcommand \thefigure {\@arabic\c@figure}
\def\fps@figure{tbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{\figurename~\thefigure}
\newenvironment{figure}
{\@float{figure}}
{\end@float}
\newenvironment{figure*}
{\@dblfloat{figure}}
{\end@dblfloat}
\newcounter{table}
\renewcommand\thetable{\@arabic\c@table}
\def\fps@table{tbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{\tablename~\thetable}
\newenvironment{table}
{\@float{table}}
{\end@float}
\newenvironment{table*}
{\@dblfloat{table}}
{\end@dblfloat}
\newlength\abovecaptionskip
\newlength\belowcaptionskip
\setlength\abovecaptionskip{10\p@}
\setlength\belowcaptionskip{0\p@}
\long\def\@makecaption#1#2{%
\vskip\abovecaptionskip
\sbox\@tempboxa{#1: #2}%
\ifdim \wd\@tempboxa >\hsize
#1: #2\par
\else
\global \@minipagefalse
\hb@xt@\hsize{\hfil\box\@tempboxa\hfil}%
\fi
\vskip\belowcaptionskip}
\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
\newcommand\@pnumwidth{1.55em}
\newcommand\@tocrmarg{2.55em}
\newcommand\@dotsep{4.5}
\setcounter{tocdepth}{3}
\newcommand\tableofcontents{%
\section*{\contentsname
\@mkboth{%
\MakeUppercase\contentsname}{\MakeUppercase\contentsname}}%
\@starttoc{toc}%
}
\newcommand*\l@part[2]{%
\ifnum \c@tocdepth >-2\relax
\addpenalty\@secpenalty
\addvspace{2.25em \@plus\p@}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
{\leavevmode
\large \bfseries #1\hfil \hb@xt@\@pnumwidth{\hss #2}}\par
\nobreak
\if@compatibility
\global\@nobreaktrue
\everypar{\global\@nobreakfalse\everypar{}}%
\fi
\endgroup
\fi}
\newcommand*\l@section[2]{%
\ifnum \c@tocdepth >\z@
\addpenalty\@secpenalty
\addvspace{1.0em \@plus\p@}%
\setlength\@tempdima{1.5em}%
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\leavevmode \bfseries
\advance\leftskip\@tempdima
\hskip -\leftskip
#1\nobreak\hfil \nobreak\hb@xt@\@pnumwidth{\hss #2}\par
\endgroup
\fi}
\newcommand*\l@subsection{\@dottedtocline{2}{1.5em}{2.3em}}
\newcommand*\l@subsubsection{\@dottedtocline{3}{3.8em}{3.2em}}
\newcommand*\l@paragraph{\@dottedtocline{4}{7.0em}{4.1em}}
\newcommand*\l@subparagraph{\@dottedtocline{5}{10em}{5em}}
\newcommand\listoffigures{%
\section*{\listfigurename
\@mkboth{\MakeUppercase\listfigurename}%
{\MakeUppercase\listfigurename}}%
\@starttoc{lof}%
}
\newcommand*\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}
\newcommand\listoftables{%
\section*{\listtablename
\@mkboth{%
\MakeUppercase\listtablename}{\MakeUppercase\listtablename}}%
\@starttoc{lot}%
}
\let\l@table\l@figure
\newdimen\bibindent
\setlength\bibindent{1.5em}
\newenvironment{thebibliography}[1]
{\section*{\refname
\@mkboth{\MakeUppercase\refname}{\MakeUppercase\refname}}%
\list{\@biblabel{\@arabic\c@enumiv}}%
{\settowidth\labelwidth{\@biblabel{#1}}%
\leftmargin\labelwidth
\advance\leftmargin\labelsep
\@openbib@code
\usecounter{enumiv}%
\let\p@enumiv\@empty
\renewcommand\theenumiv{\@arabic\c@enumiv}}%
\sloppy
\clubpenalty4000
\@clubpenalty \clubpenalty
\widowpenalty4000%
\sfcode`\.\@m}
{\def\@noitemerr
{\@latex@warning{Empty `thebibliography' environment}}%
\endlist}
\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
\let\@openbib@code\@empty
\newenvironment{theindex}
{\if@twocolumn
\@restonecolfalse
\else
\@restonecoltrue
\fi
\columnseprule \z@
\columnsep 35\p@
\twocolumn[\section*{\indexname}]%
\@mkboth{\MakeUppercase\indexname}%
{\MakeUppercase\indexname}%
\thispagestyle{plain}\parindent\z@
\parskip\z@ \@plus .3\p@\relax
\let\item\@idxitem}
{\if@restonecol\onecolumn\else\clearpage\fi}
\newcommand\@idxitem{\par\hangindent 40\p@}
\newcommand\subitem{\@idxitem \hspace*{20\p@}}
\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
\renewcommand\footnoterule{%
\kern-3\p@
\hrule\@width.4\columnwidth
\kern2.6\p@}
\newcommand\@makefntext[1]{%
\parindent 1em%
\noindent
\hb@[email protected]{\hss\@makefnmark}#1}
\newcommand\contentsname{Contents}
\newcommand\listfigurename{List of Figures}
\newcommand\listtablename{List of Tables}
\newcommand\refname{REFERENCES}
\newcommand\indexname{Index}
\newcommand\figurename{Figure}
\newcommand\tablename{Table}
\newcommand\partname{Part}
\newcommand\appendixname{APPENDIX}
\newcommand\abstractname{ABSTRACT}
\def\today{\ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\day, \number\year}
\setlength\columnsep{10\p@}
\setlength\columnseprule{0\p@}
\pagestyle{plain}
\pagenumbering{arabic}
\if@twoside
\else
\raggedbottom
\fi
\if@twocolumn
\twocolumn
\sloppy
\flushbottom
\else
\onecolumn
\fi
\endinput
%%
%% End of file `article.cls'.
이것이 귀하의 논문 작성에 도움이 되기를 바랍니다. 당신의 논문에 행운이 있기를 바랍니다.