이력서를 작성 중입니다. 저는 초보자라서 명령어 \vspace와 \vfill. 하지만 기대했던 결과는 나오지 않는 것 같습니다. 문서 전체에 걸쳐 줄 간격이 균일해지기를 원합니다. 내가 작업할 수 있도록 누구든지 나에게 무엇이든 제안해 줄 수 있나요?
나는 또한 \onehalfspacing및 \onespacing명령으로 작업을 시도했지만 어느 것도 좋은 결과를 얻지 못하는 것 같습니다.
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\fontfamily{SansSerif}
\selectfont
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\textheight=9.75in
\raggedbottom
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{{\small \colorbox{mygrey}{\begin{minipage}{0.975\textwidth}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\hspace{0.5cm}\\[-0.2cm]
\textbf{Anupam Bisht} \\
\indent $2^{nd}$ Year, B.Tech Student\\
\indent Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
\indent VIT University, Vellore, TN -632014
\hfill Email: [email protected] \\
\resheading{\textbf{OBJECTIVE} }\\[\lsep]
\vspace{4mm} \vfill
\indent To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past \indent can be used to develop a new solution or optimize existing solutions for the profit of company as well as \indent betterment of the society.
\vspace{2mm}
\resheading{\textbf{ACADEMIC DETAILS} }\\[\lsep]
\vspace{5mm} \vfill
%\begin{table}[ht!]
%\begin{center}
\indent \begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
%\end{center}
%\end{table}
\vspace{2mm}
%\resheading{\textbf{FIELDS OF INTEREST} }\\[\lsep]
%\begin{itemize}
%\item \noindent Wireless Network and Network Security, %Another one, a third one
%\end{itemize}
\resheading{\textbf{AREA OF INTEREST} }\\[\lsep]
\vspace{1.0mm}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\vfill
\resheading{\textbf{TECHNICAL SKILLS} }\\[\lsep]
\vfill \vspace{1.0mm}
\begin{itemize}
\item \noindent \textbf{Languages:\space} C ,\space C++,\space Python, \space R
\item \noindent \textbf{Tools:\space}MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \noindent \textbf{Platforms:\space} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS} }\\[\lsep]
\vfill \vspace{0.5mm}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
\indent We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES} }\\[\lsep]
\begin{itemize}
\item \noindent A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item \noindent Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS} }\\[\lsep]
\begin{itemize}
\item \noindent Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item \noindent Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item \noindent Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item \noindent Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item \noindent Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
%\resheading{\textbf{MAJOR PROJECTS AND SEMINAR} }\\[\lsep]
%\begin{itemize}
%\item \textbf{Media Access Control Controling
%} (Research Project) \\
% \emph{(Guide:Prof. Hubert F.
%, May'13 - till date)} \\[-0.6cm]
% \begin{itemize}\itemsep \isep
% \item Objective :Performance analysis of HTTP web browsing traffic.
%.
% \item Performance analysis will help in comparing different MAC protocols based on different network sce-
%narios.
\end{document}
답변1
출력을 보기 전에 모든 경고를 수정하는 것이 가장 좋습니다.
여러 가지가 있습니다
Underfull \hbox (badness 10000) in paragraph at lines 45--46
모두 오용으로 인한 것이므로 \\사용을 제외하고는 제거하십시오.tabular
그럼 여러 가지가 있어
Overfull \hbox (8.59479pt too wide) in paragraph at lines 54--55
[][][][][][][]
각 줄에서 하나씩 \resheading.
추측한 것을 0.975\textwidth다음과 같이 바꾸세요.\dimexpr\textwidth-2\fboxsep\relax
그러면 경고가 뜹니다
LaTeX Font Warning: Font shape `T1/SansSerif/m/n' undefined
어느 것에서 왔는지
\fontfamily{SansSerif}\selectfont
나는 당신이 의도했다고 가정합니다 \sffamily
그런 다음 중복된 항목을 삭제 하고 이미 페이지 설정에 사용한 \raggedbottom기본 구문 할당을 삭제했습니다 .\textheightgeometry
그런 다음 모두 삭제 \noindent하고\indent
그러면 마크업이 최소한 합리적이고 TeX에서 경고가 표시되지 않으므로 그런 다음에만 PDF를 보십시오.
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\sffamily
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{%
\par
\medskip
{\small
\noindent
\colorbox{mygrey}{\begin{minipage}{\dimexpr\textwidth-2\fboxsep\relax}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}\par
\nopagebreak
\smallskip}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\noindent
\textbf{Anupam Bisht} \\
$2^{nd}$ Year, B.Tech Student\\
Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
VIT University, Vellore, TN -632014
mail: [email protected]
\resheading{\textbf{OBJECTIVE}}
To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past can be used to develop a new solution or optimize existing solutions for the profit of company as well as betterment of the society.
\resheading{\textbf{ACADEMIC DETAILS}}
\begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
\resheading{\textbf{AREA OF INTEREST}}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\resheading{\textbf{TECHNICAL SKILLS}}
\begin{itemize}
\item \textbf{Languages:} C ,\space C++,\space Python, \space R
\item \textbf{Tools:} MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \textbf{Platforms:} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS}}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES}}
\begin{itemize}
\item A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS}}
\begin{itemize}
\item Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
\end{document}
생산하는
이는 원하는 줄 간격이 아닐 수도 있지만 간격에 대한 추가 지정을 위해 보다 안정적인 기반을 형성해야 합니다.