제목 줄의 색상을 변경하려고 합니다(예를 들어 제목의 이름과 연락처 정보는 제목 줄마다 다른 색상을 적용해야 합니다). 그리고 불행하게도 내가 기대했던 대로 작동하지 않습니다.
먼저 다음 템플릿을 사용하여 작업하고 있습니다. https://www.overleaf.com/articles/rishabh-cv-v3/chvmptzhvfnb
그림에서 볼 수 있듯이 2는 \color를 사용하여 다른 색상이지만 1의 색상을 변경할 수 없습니다.
둘째, .cls 파일에는 "namesection"을 다루는 섹션이 있지만 이는 수정된 템플릿이므로 해당 섹션을 사용하지 않습니다.
셋째, 다음을 시도했습니다.
- \textcolor{blue}{\textbf{some bold and colored text}}에서는 작동하지 않았습니다 flushleft. - \color{blue}실내외 도 다 해봤는데 flushleft
- 드디어 해봤습니다.\leavevmode\color{red} text
나는 관련 섹션이 다음과 같다고 생각합니다.
\documentclass[letterpaper]{deedy-resume}
\usepackage{fixltx2e}
\usepackage{hyperref}
\usepackage{color}
\usepackage[document]{ragged2e}
\begin{document}
%----------------------------------------------------------------------------------------
% TITLE SECTION
%----------------------------------------------------------------------------------------
\begin{flushleft}
\Huge \textbf{RISHABH URVESH SHAH}\\*
\begin{small}
\vspace{-7mm}
\textbf{\urlstyle{same}{\footnotesize \\ \url{http://aqes.cee.illinois.edu} | \url{hiwater.org}} | \href{mailto:[email protected]}{\underline} [email protected] | +1 (217)-819-6377
}
\end{small}
\end{flushleft}
미리 도움을 주셔서 감사합니다.
답변1
원하는 것을 얻는 가장 좋은 방법은 command 를 \namesection다음과 같이 재정의하는 것입니다.
\renewcommand{\namesection}[7]{ % Defines the command for the main heading
\flushleft
{
\fontsize{40pt}{60pt} % Font size
\fontspec[Path = fonts/lato/]{Lato-Lig}\selectfont #1 % First name font
\fontspec[Path = fonts/lato/]{Lato-Lig}\selectfont #2 % Last name font
\\[5pt] % Whitespace between the name and contact information
}
\flushleft
{ % Center the contact information
\color{headings} % Use the headings color
\fontspec[Path = fonts/raleway/]{Raleway-Bold}\fontsize{11pt}{14pt}\selectfont \textcolor{red}{#3}
\fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{11pt}{14pt}\selectfont \textcolor{blue}{#4} \\
\fontspec[Path = fonts/raleway/]{Raleway-Bold}\fontsize{11pt}{14pt}\selectfont #5
\fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{11pt}{14pt}\selectfont #6 \\
{\footnotesize #7} \\
} % Contact information font
%\noindent\makebox[\linewidth]{\color{headings}\rule{\paperwidth}{0.4pt}} % Horizontal rule
%\vspace{-5pt} % Reduce whitespace after the rule slightly
}
\namesection이 재정의를 사용하면 like 에 7개의 매개변수를 추가할 수 있습니다.
\namesection{RISHABH}{URVESH SHAH}%
{Work Address:}{4140 NCEL MC-250, 205 N Mathews Ave, Urbana IL 61801, USA}
{Home Address:}{107 E Springfield Ave, Apt. 217, Champaign IL 61820, USA}
{{\urlstyle{same}\url{http://aqes.cee.illinois.edu} | \url{hiwater.org}} | \href{mailto:[email protected]}{[email protected]} | +1 (217)-819-6377}
을 추가하고 \flushleft이름과 글꼴 크기를 변경했으며 인쇄된 데이터의 색상을 변경하는 방법을 보여주는 한 가지 예를 추가했습니다(글꼴 이름에 포함된 굵은 글꼴 참조).
\textcolor{red}{#3}
그리고
\textcolor{blue}{#4}
제목에 대한 마감 규칙도 삭제했습니다 ...
이제 그 작업을 수행하고 필요한 것으로 변경할 수 있습니다.
다음 MWE를 참조하십시오.
\documentclass[letterpaper]{deedy-resume}
%\usepackage{fixltx2e}
\usepackage{xcolor}
\usepackage[document]{ragged2e}
\usepackage{hyperref}
\renewcommand{\namesection}[7]{ % Defines the command for the main heading
\flushleft
{
\fontsize{40pt}{60pt} % Font size
\fontspec[Path = fonts/lato/]{Lato-Lig}\selectfont #1 % First name font
\fontspec[Path = fonts/lato/]{Lato-Lig}\selectfont #2 % Last name font
\\[5pt] % Whitespace between the name and contact information
}
\flushleft
{ % Center the contact information
\color{headings} % Use the headings color
\fontspec[Path = fonts/raleway/]{Raleway-Bold}\fontsize{11pt}{14pt}\selectfont \textcolor{red}{#3}
\fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{11pt}{14pt}\selectfont \textcolor{blue}{#4} \\
\fontspec[Path = fonts/raleway/]{Raleway-Bold}\fontsize{11pt}{14pt}\selectfont #5
\fontspec[Path = fonts/raleway/]{Raleway-Medium}\fontsize{11pt}{14pt}\selectfont #6 \\
{\footnotesize #7} \\
} % Contact information font
%\noindent\makebox[\linewidth]{\color{headings}\rule{\paperwidth}{0.4pt}} % Horizontal rule
\vspace{-5pt} % Reduce whitespace after the rule slightly
}
\begin{document}
%----------------------------------------------------------------------------------------
% TITLE SECTION
%----------------------------------------------------------------------------------------
\namesection{RISHABH}{URVESH SHAH}%
{Work Address:}{4140 NCEL MC-250, 205 N Mathews Ave, Urbana IL 61801, USA}
{Home Address:}{107 E Springfield Ave, Apt. 217, Champaign IL 61820, USA}
{{\urlstyle{same}\url{http://aqes.cee.illinois.edu} | \url{hiwater.org}} | \href{mailto:[email protected]}{[email protected]} | +1 (217)-819-6377}
%----------------------------------------------------------------------------------------
% LEFT COLUMN
%----------------------------------------------------------------------------------------
\begin{minipage}[t]{0.29\textwidth}
\section{Education}
\subsection{University of Illinois}
\subsection{at Urbana-Champaign}
\descript{M.S. Civil and Environmental Engineering}
\location{Expected Aug 2015 | GPA: 3.91}
\sectionspace
\subsection{Gujarat Technological}
\subsection{University}
\descript{B.E. Environmental Engineering}
\location{June 2013 | GPA: 8.67/10.00}
\sectionspace
\sectionspace
\section{Coursework}
\subsection{Graduate}
Air Quality Engineering \\
Air Quality Modeling \\
Atmospheric Meteorology \\
Aerosol Sampling and Analysis \\
Environmental Transport Modeling \\
Water Chemistry
\sectionspace
\subsection{Undergraduate}
Wastewater Treatment Process Design \\
Environmental Impact Assessment \\
Environmental Legislation and Audit \\
Occupational Health and Safety \\
Waste Management \\
Project Management \\
Fundaments of Automobile Engineering \\
Conventional Power Engineering \\
\sectionspace
\section{Skills}
\subsection{Computer}
Aerosol Instrument Manager \textbullet{} LabVIEW \textbullet{} MATLAB \textbullet{} AERMOD \textbullet{} Engineering Equation Solver \textbullet{}
\\ WRPLOT View \textbullet{} MINEQL+ \textbullet{} ALOHA \textbullet{} MARPLOT
\sectionspace
\subsection{Certificates}
\textbullet{}Energy and Sustainability Engineering | Jan 2015| University of Illinois, Urbana-Champaign
\textbullet{}Certified LabVIEW Associate Developer (CLAD) | Jan 2015 | National Instruments
\sectionspace
\end{minipage}
\hfill
%
%----------------------------------------------------------------------------------------
% RIGHT COLUMN
%----------------------------------------------------------------------------------------
%
\begin{minipage}[t]{0.66\textwidth}
\section{Experience}
\runsubsection{Graduate Research Assistant} |\descript{\small Dept. of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign}
\location{Expected May 2014 – Aug 2015 | Urbana, IL}
\vspace{\topsep}
\begin{tightitemize}
\item Advised by Dr. Mark J. Rood and Dr. Tami C. Bond.\\
\item Conducting laboratory experiments to characterize the optical properties and cloud condensation nuclei (CCN) activity of biomass-burning aerosol in tandem with atmospherically relevant tracer gas, ozone. Extensive use of aerosol sampling and measurement equipment.\\
\item Research funded by the US Department of Energy.
\end{tightitemize}
\sectionspace
\runsubsection{Graduate Teaching Assistant} |\descript{\small Dept. of Natural Resources and Environmental Sciences, University of Illinois at Urbana-Champaign}
\location{Jan 2014 – May 2014 | Urbana, IL}
\begin{tightitemize}
\item Assistant to Dr. Bethany B. Cutts.\\
\item Tasks included leading weekly discussion sessions, weekly course planning, holding office hours and grading assignments. Worked under Dr. Bethany Cutts.
\end{tightitemize}
\sectionspace
\runsubsection{Vocational Trainee} |\descript{\small Environmental Control Unit, Gujarat Narmada-Valley Fertilizers Pvt. Ltd. (GNFC)}
\location{June 2012 | Bharuch, Gujarat, India}
\begin{tightitemize}
\item Stationed at the Nitro-Effluent and Common Effluent Treatment Plant (NETP and CETP) for treating combined effluent streams from various chemical manufacturing units of GNFC.
\end{tightitemize}
\sectionspace
\section{Project Experience}
\descript{Automotive air pollution and its control by catalytic converters}
\location{Fall 2013 | Independent Study | University of Illinois}
A study of the formation of air pollutants in an internal combustion engine, role and limitations of catalytic converters in controlling emissions
\sectionspace
\descript{Modeling of increase in SO\textsubscript{2} concentrations due to proposed erection of stacks}
\location{Fall 2013 | Coursework Project | University of Illinois}
Modeling ambient SO\textsubscript{2} emissions around proposed site of stack erection using AERMOD, Breeze 3D Analyst and WRPLOT ViewTM software.
\sectionspace
\descript{Mitigation response following a cyclohexane spill}
\location{Fall 2013 | Coursework Project | University of Illinois}
Modeling the behaviour of a hypothetical cyclohexane spill using computer software, viz. ALOHA, MARPLOT and CAMEO Chemicals and to develop an emergency response plan to be followed in such scenario.
\sectionspace
\section{Presentations}
\textbullet{}\location{\color{darkgray} Poster: "Hygroscopicity and CCN Activity of Biomass-burning aerosol"}
{\footnotesize Mar 2015 | US Department of Energy: Atmospheric System Research Meeting | Vienna VA\\}
\textbullet{}\location{\color{darkgray} Poster: "Measuring CCN activity of Organic Carbon with Ammonia Aging"}
{\footnotesize Apr 2014 | Environmental Engineering and Science Symposium | Champaign IL}
\sectionspace
\end{minipage}
\end{document}
결과는 다음과 같습니다.
