
인수할 새 Exchange 2013 서버 설치를 준비하기 위해 Exchange 2010 SP1 서버를 SP3으로 업그레이드하려고 합니다. 마이그레이션하려면 2010 시스템에 SP3이 필요합니다. 모든 필수 구성 요소 검사가 성공했지만(장애 조치 클러스터링에 대한 업데이트가 설치되지 않은 것과 관련된 경고 1개, 어쨌든 사용하지 않음) 업그레이드를 시작한 후 10초 후에 바로 다음 오류가 발생합니다.
설정 로그의 관련 부분은 다음과 같습니다(완전한 실패 로그여기):
[12-06-2013 01:30:12.0483] [2] Creating templates
[12-06-2013 01:30:12.0483] [2] Entering CAtomOrgCtChildren::ScUpdateTemplates
[12-06-2013 01:30:12.0483] [2] Attempt to get an exclusive access to the directory
[12-06-2013 01:30:12.0483] [2] Checking if the user has enough persmissions to update templates.
[12-06-2013 01:30:12.0483] [2] Entering ScHavePermissionToCreateDSObject
[12-06-2013 01:30:12.0483] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
Error code 0X8000500D (20493): This property can't be found in the cache.
[12-06-2013 01:30:12.0483] [2] Leaving ScHavePermissionToCreateDSObject
[12-06-2013 01:30:12.0483] [2] User has enough permissions to update templates.
[12-06-2013 01:30:15.0806] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:1200)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] CAtomOrgCtChildren::ScUpdateTemplates - failed to get a list of templates (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1205)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] CAtomOrgCtChildren::ScUpdateTemplates (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:1336)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] Leaving CAtomOrgCtChildren::ScUpdateTemplates
[12-06-2013 01:30:15.0806] [2] CAtomOrgCtChildren::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_orgctchildren.cxx:215)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] Leaving CAtomOrgCtChildren::ScAddDSObjects
[12-06-2013 01:30:15.0806] [2] CBaseAtom::ScRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:1478)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
Error code 0X80072020 (8224): An operations error occurred.
[12-06-2013 01:30:15.0806] [2] Leaving ScSetupAtom
[12-06-2013 01:30:15.0822] [2] [ERROR] An error occurred with error code '2147950624' and message 'An operations error occurred.'.
[12-06-2013 01:30:16.0259] [1] The following 1 error(s) occurred during task execution:
[12-06-2013 01:30:16.0259] [1] 0. ErrorRecord: An error occurred with error code '2147950624' and message 'An operations error occurred.'.
[12-06-2013 01:30:16.0259] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '2147950624' and message 'An operations error occurred.'.
나는 지금 실제로 실패하고 있는 것이 무엇인지, 그리고 그 이유가 무엇인지에 완전히 빠져 있습니다. 최근 네트워크에서 완전히 제거된 도메인 컨트롤러가 있었지만 전혀 관련이 없었습니다. 모든 FSMO 역할과 GC는 srv-003 서버에 남아 있었고 다른 것들은 완전히 강등되었습니다.
이 문제의 원인이 무엇인지 아는 사람이 있나요?
답변1
설치 프로그램이 설치 디렉터리에 파일이 없거나 손상되었다고 불평하는 것 같습니다. 패치를 다시 다운로드하고 md5를 확인한 후 다시 시도하십시오.
답변2
오류를 다시 살펴보면 일부 Active Directory 개체를 업데이트하려고 시도했지만 실패하는 것 같습니다. 실행해 보세요 setup /PrepareSchema
. 자신이 그룹의 구성원인지 확인하세요 Schema Admins
.
답변3
결국 설치에 성공했습니다. 내 업데이트 전 상황은 다음과 같습니다.
- Windows 2008R2 도메인 컨트롤러 2개
- 그 중 하나는 Exchange 2010 SP1을 실행하고 있습니다.
또한 그 과정에서 기존 도메인 컨트롤러 2개를 Windows 2012 R2로 교체할 계획도 있었습니다. SP2 또는 SP3으로 업데이트할 수 없게 되자 결국 첫 번째 새 Windows 2012 R2를 설치하고 이를 전체 도메인 컨트롤러로 만들고 모든 FSMO 역할을 이전했습니다. 이제부터 setup /PrepareAD
Exchange 2010 상자에서 성공적으로 실행하고 서비스 팩 3을 설치할 수 있었습니다.
나생각하다근본적인 이유는 이전에 Windows 2012를 가지고 놀다가 시간이 없어서 2k12R2가 곧 출시될 예정이었을 때 업그레이드 경로를 중단했기 때문입니다. 나했다그러나 동시에 AD 스키마를 업데이트 forestprep
합니다 . domainprep
따라서 설치 프로그램이 2k8R2 FSMO 보유자를 사용하여 여전히 2k8R2 기능 수준에 있는 동안 Win2k12 준비 AD를 찾는 것에 대해 혼란을 겪었던 것 같습니다.
도메인에 여전히 2k8R2 DC가 있기 때문에 아직 기능 수준을 올리지 않았습니다. 로그에 항상 스키마 마스터와 통신하고 있음이 표시되었으므로 FSMO 경로를 전송했습니다.