재부팅 시 다중 nic 카드 스위치 포트

재부팅 시 다중 nic 카드 스위치 포트

내 Ubuntu 18 시스템에는 2포트 Intel NIC가 있고, 사용하지 않는 마더보드에도 NIC가 있습니다. 원래는 서로 다른 IP를 사용하여 두 개의 NIC를 설정하고 싶었지만 실패했고 이제는 동일한 NIC 포트에 두 개의 IP가 있지만 두 개의 인터페이스(eth0 및 p4p1)에 있습니다. 종종 컴퓨터를 재부팅할 때 Ubuntu는 NIC(연결되지 않음)의 다른 이더넷 포트로 전환하고 내 구성에서 어디가 잘못되었는지 파악할 수 없습니다. 이거 보시고 해결하신 분 계신가요? 궁극적으로 나는 두 개의 IP를 분리하고 각각 자체 이더넷 포트를 갖고 싶습니다. 소프트웨어 인터페이스를 하드웨어 포트에 할당하는 방법을 알 수 없습니다. 로그와 구성을 제공하겠습니다. 필요한 것이 무엇인지 알려주세요. 감사해요.

# lshw -C network
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:01:00.0
       logical name: p4p1
       version: 06
       serial: 10:bf:48:40:ba:c3
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.120 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
       resources: irq:35 ioport:e000(size=256) memory:fd004000-fd004fff memory:fd000000-fd003fff
  *-network:0
       description: Ethernet interface
       product: 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications)
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:04:00.0
       logical name: eth0
       version: 06
       serial: 00:15:17:ba:ee:72
       size: 1Gbit/s
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=5.11-2 ip=192.168.0.150 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
       resources: irq:37 memory:fe9a0000-fe9bffff memory:fe980000-fe99ffff ioport:d020(size=32) memory:fe960000-fe97ffff
  *-network:1 DISABLED
       description: Ethernet interface
       product: 82571EB/82571GB Gigabit Ethernet Controller D0/D1 (copper applications)
       vendor: Intel Corporation
       physical id: 0.1
       bus info: pci@0000:04:00.1
       logical name: eth1
       version: 06
       serial: 00:15:17:ba:ee:73
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=5.11-2 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:38 memory:fe940000-fe95ffff memory:fe920000-fe93ffff ioport:d000(size=32) memory:fe900000-fe91ffff




# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto p4p1
iface p4p1 inet static
  address 192.168.0.120
  netmask 255.255.255.0
  gateway 192.168.0.1
  network 192.168.0.0
  dns-nameservers 192.168.0.170  192.168.0.171

auto eth0
iface eth0 inet static
  address 192.168.0.150
  netmask 255.255.255.0
  gateway 192.168.0.1
  network 192.168.0.0
  dns-nameservers 192.168.0.170  192.168.0.171

iface eth1 inet manual
#auto eth1
#iface eth1 inet static
#  address 192.168.0.151
#  netmask 255.255.255.0
#  gateway 192.168.0.1
#  network 192.168.0.0
#  dns-nameservers 192.168.0.170  192.168.0.171




No yaml files.

답변1

다음을 시도해 보세요...

# cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto p4p1
iface p4p1 inet static
  hwaddress 10:bf:48:40:ba:c3
  metric 100
  address 192.168.0.120
  netmask 255.255.255.0
  gateway 192.168.0.1
  network 192.168.0.0
  dns-nameservers 192.168.0.170  192.168.0.171

auto eth0
iface eth0 inet static
  hwaddress 00:15:17:ba:ee:72
  metric 200
  address 192.168.0.150
  netmask 255.255.255.0
  gateway 192.168.0.1
  network 192.168.0.0
  dns-nameservers 192.168.0.170  192.168.0.171

auto eth1
iface eth1 inet static
  hwaddress 00:15:17:ba:ee:73
  metric 300
  address 192.168.0.151
  netmask 255.255.255.0
  gateway 192.168.0.1
  network 192.168.0.0
  dns-nameservers 192.168.0.170  192.168.0.171

관련 정보