☰

Driver sem fio não detectado

tag-icon • tag-icon 11.04 networking wireless
Driver sem fio não detectado

Ao digitar iwconfig, recebo apenas "sem extensões sem fio"

Como faço para que o driver sem fio do Ubuntu seja detectado?

lspci:

00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
00:04.0 PCI bridge: ATI Technologies Inc Device 7914
00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1)
00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series]
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)

lsusb:

Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 066f:8000 SigmaTel, Inc. MSCN MP3 Player
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sudo lshw -class network:

 *-network
       description: Ethernet interface
       product: NetLink BCM5787M Gigabit Ethernet PCI Express
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:10:00.0
       logical name: eth0
       version: 02
       serial: 00:1a:4b:82:59:ee
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.116 firmware=sb v2.09 latency=0 link=no multicast=yes port=twisted pair
       resources: irq:43 memory:d0000000-d000ffff

/etc/rede/interfaces:

auto lo
iface lo inet loopback

sudo rfkill list:

0: hci0: Bluetooth
      Soft blocked: no
      Hard blocked: no
1: hp-wifi: Wireless LAN
      Soft blocked: yes
      Hard blocked: no
2: hp-bluetooth: Bluetooth
      Soft blocked: no
      Hard blocked: no

Responder1

A saída sudo rfkill listmostra que sua placa de rede está "bloqueada".

Isso pode acontecer quando a placa wireless foi sinalizada para desligar - provavelmente devido a uma chave do tipo Fn+.

Se você não identificar a chave do teclado, execute as seguintes etapas:

  1. execute em um terminal:

    sudo rfkill unblock hp-wifi; sudo rfkill unblock wifi; sudo rfkill unblock all

  2. execute novamente sudo rfkill listpara confirmar que o cartão foi desbloqueado.

  3. reinício

  4. execute sudo rfkill listnovamente para confirmar o desbloqueio como retido.

  5. execute novamente sudo lshw -class network- agora você deve ver que o kernel reconheceu (ou não) a placa wireless.

Se o módulo do kernel sem fio tiver sido reconhecido (não deve dizer "não reclamado"), o Network Manager deverá agora ser capaz de ver as redes sem fio que estão disponíveis na sua vizinhança.

informação relacionada