
Tenho recebido muitos congelamentos e algumas reinicializações repentinas recentemente. Na maioria das vezes isso acontece enquanto estou transmitindo mídia. O congelamento faz um loop infinito que dura (aproximadamente) 1 segundo de áudio. Achei que tinha encontrado e resolvido várias vezes, mas sempre errei.
Tentei executar o memtest durante a inicialização, mas ele congela em 15%, 30% ou 40% dependendo das configurações que escolhi. Eu entendo que isso pode acontecer e acontece com alguns BIOS e placas.
Executei o SMART e vi alguns recursos marcados como pré-falha. (Pretendo comprar uma unidade mais recente e clonar o conteúdo da antiga em sua substituição quando puder).
Seguindoesta respostaparaminha pergunta, eu corri sudo journalctl -b -1 -e
.
eu entendo deessa questãoque UFW BLOCK significa que uma conexão foi bloqueada. Ele aparece muito no final da saída (redirecionei a saída para um arquivo de texto).
Nestes endereços IP locais, 254 é meu roteador e 103 é meu PC
Aug 27 17:53:44 Hope systemd[1]: Starting Hostname Service...
Aug 27 17:53:44 Hope dbus-daemon[997]: [system] Successfully activated service 'org.freedesktop.hostname1'
Aug 27 17:53:44 Hope systemd[1]: Started Hostname Service.
Aug 27 17:53:44 Hope hud-service[3437]: void DBusMenuImporter::slotGetLayoutFinished(QDBusPendingCallWatcher*): "No such interface “com.canonical.dbusmenu” on object at path /org/ayatana/bamf/window/65013137"
Aug 27 17:53:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:54:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:54:14 Hope systemd[1]: systemd-hostnamed.service: Succeeded.
Aug 27 17:54:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62508 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:54:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62514 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:55:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:55:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:55:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:56:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:56:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:56:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62554 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:57:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=302 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=51143 DPT=42922 LEN=282
Aug 27 17:57:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:57:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62573 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62579 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62589 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:58:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62595 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:59:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 17:59:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62606 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 17:59:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62613 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:00:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62619 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:00:35 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:30:cd:a7:a8:fd:fc:08:00 SRC=192.168.1.205 DST=192.168.1.103 LEN=267 TOS=0x00 PREC=0x00 TTL=64 ID=92 PROTO=UDP SPT=1900 DPT=42922 LEN=247
Aug 27 18:00:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62635 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62641 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62647 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:01:48 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:02:08 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:02:29 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62669 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:02:49 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Aug 27 18:03:09 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:94:9a:a9:a4:76:8c:08:00 SRC=192.168.1.237 DST=192.168.1.103 LEN=467 TOS=0x00 PREC=0x00 TTL=128 ID=62681 PROTO=UDP SPT=1900 DPT=42922 LEN=447
Aug 27 18:03:28 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:30:67:9f:6e:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=192.168.1.103 LEN=415 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42922 LEN=395
Estou olhando para a parte certa do arquivo?
Existe uma pista do motivo do acidente aqui?
Onde mais eu poderia procurar?
grátis -h
total used free shared buff/cache available
Mem: 15Gi 3.5Gi 7.9Gi 377Mi 4.3Gi 11Gi
Swap: 28Gi 0B 28Gi
sysctl vm.swappiness
vm.swappiness = 60
trocar -s
Filename Type Size Used Priority
/dev/sda5 partition 29668348 0 -2
sudo lshw -C memória
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 080015
date: 03/26/2010
size: 64KiB
capacity: 1MiB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 256KiB
capacity: 256KiB
capabilities: pipeline-burst internal varies
configuration: level=1
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 1MiB
capacity: 1MiB
capabilities: pipeline-burst internal varies
configuration: level=2
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 6MiB
capacity: 6MiB
capabilities: pipeline-burst internal varies
configuration: level=3
*-memory:0
description: System Memory
physical id: 24
slot: System board or motherboard
size: 16GiB
*-bank:0
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 0
serial: 00000000
slot: DIMM0
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 1
serial: 00000000
slot: DIMM1
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:2
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 2
serial: 00000000
slot: DIMM2
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMMProject-Id-Version: lshwReport-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS>PO-Revision-Date: 2012-02-05 00:26+0000Last-Translator: Andi Chandler <Unknown>Language-Team: English (United Kingdom) <[email protected]>MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2021-08-02 16:47+0000X-Generator: Launchpad (build 8bd362bf86c4b35e805f897f03c203e3576a7006) Synchronous 667 MHz (1.5 ns)
product: CMV4GX3M1A1333C9
vendor: Corsair
physical id: 3
serial: 00000000
slot: DIMM3
size: 4GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-memory:1 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id: 4
bus info: pci@0000:00:00.0
version: a1
width: 32 bits
clock: 66MHz (15.2ns)
capabilities: ht bus_master cap_list
configuration: latency=0
*-memory:2 UNCLAIMED
description: RAM memory
product: MCP61 Memory Controller
vendor: NVIDIA Corporation
physical id: 1.2
bus info: pci@0000:00:01.2
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
configuration: latency=0
Atualização adicional: Então, abri meu PC e usei o Memtest68+ 5.01 do menu GRUB em cada stick de RAM. Todos eles passaram. Demorou algumas horas. Não tenho pressa em fazer isso de novo.
Atualização superior à atualização adicional: também dei uma olhada nos registros UFW BLOCK e permiti explicitamente as transmissões mais comuns em minha rede. Portanto, é improvável que esses erros de UDP sejam um problema contínuo.
Mais atualizações: resolvi a maioria desses blocos UDP e a última execução terminou assim:
Sep 03 21:34:42 Hope systemd[1]: Started Run anacron jobs.
Sep 03 21:34:42 Hope systemd[1]: anacron.service: Succeeded.
Sep 03 21:34:42 Hope anacron[19507]: Anacron 2.3 started on 2021-09-03
Sep 03 21:34:42 Hope anacron[19507]: Normal exit (0 jobs run)
Sep 03 21:35:56 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:38:01 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:39:01 Hope CRON[19572]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 03 21:39:01 Hope CRON[19571]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 03 21:39:01 Hope CRON[19573]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi)
Sep 03 21:39:01 Hope CRON[19571]: pam_unix(cron:session): session closed for user root
Sep 03 21:39:01 Hope CRON[19574]: (root) CMD ( [ -x /usr/lib/php5/sessionclean ] && /usr/lib/php5/sessionclean)
Sep 03 21:39:01 Hope CRON[19572]: pam_unix(cron:session): session closed for user root
Sep 03 21:39:02 Hope systemd[1]: Starting Clean php session files...
Sep 03 21:39:02 Hope sessionclean[19644]: /usr/lib/php/sessionclean: 35: php7.0: not found
Sep 03 21:39:02 Hope systemd[1]: phpsessionclean.service: Succeeded.
Sep 03 21:39:02 Hope systemd[1]: Finished Clean php session files.
Sep 03 21:40:06 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 03 21:42:11 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Atualização nº 1:
memtest
congela quando executado. Suspeite de RAM ruim ou de RAM que precisa ser recolocada em seu soquete. A RAM está nos slots DIMM0-3. Remova os DIMMs1-3 e teste novamentememtest
. Sememtest
for executado sem erros, adicione novamente um DIMM ao slot DIMM1 e teste novamente, etc.
Grande e velha atualização (conforme solicitado)
grátis -h
total used free shared buff/cache available
Mem: 15Gi 3.3Gi 5.0Gi 144Mi 7.4Gi 11Gi
Swap: 4.0Gi 0B 4.0Gi
Solicitar grep
# swap was on /dev/sda5 during installation
#UUID=01eaad91-0858-4b01-8cad-76671cf8682d none swap sw 0 0
/swapfile none swap sw 0 0
trocar
Filename Type Size Used Priority
/swapfile file 4194300 0 -2
Capturas de tela do disco rígido
Um atualizado sudo journalctl -b -1 -e
.
Resolvi alguns dos relatórios de bloqueio UDP permitindo-os por serem transmissões de rede doméstica inofensivas.
Sep 05 17:25:06 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:27:11 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:29:16 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:30:01 Hope CRON[31486]: pam_unix(cron:session): session opened for user root by (uid=0)
Sep 05 17:30:01 Hope CRON[31487]: (root) CMD ([ -x /etc/init.d/anacron ] && if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start >/dev/null; fi)
Sep 05 17:30:01 Hope CRON[31486]: pam_unix(cron:session): session closed for user root
Sep 05 17:31:21 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Sep 05 17:32:33 Hope systemd[1]: Started Run anacron jobs.
Sep 05 17:32:33 Hope anacron[31544]: Anacron 2.3 started on 2021-09-05
Sep 05 17:32:33 Hope anacron[31544]: Normal exit (0 jobs run)
Sep 05 17:32:33 Hope systemd[1]: anacron.service: Succeeded.
Sep 05 17:33:01 Hope smartd[1067]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 107 to 108
Sep 05 17:33:01 Hope smartd[1067]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Sep 05 17:33:02 Hope smartd[1067]: Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Sep 05 17:33:26 Hope kernel: [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:44:fe:3b:c4:a4:0d:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=0 PROTO=2
Achei que o HDD estava esquentando muito.Acontece que esses são valores de índice.
Responder1
memtest
Você pode ter um problema de hardware.
Vá parahttps://www.memtest86.com/e baixe/execute gratuitamente memtest
para testar sua memória. Obtenha pelo menos uma aprovação completa em todos os testes 4/4 para confirmar a boa memória. Isso pode levar muitas horas para ser concluído.
trocar
A menos que você hiberne, sua partição swap será muito grande. Vamos substituí-lo por um 4G/swapfile.
Observação: O uso incorreto dos comandos rm
e dd
pode causar perda de dados. Sugira copiar/colar.
No terminal
...
sudo swapoff -a # turn off swap
sudo rm -i /swapfile # remove old /swapfile
sudo dd if=/dev/zero of=/swapfile bs=1M count=4096
sudo chmod 600 /swapfile # set proper file protections
sudo mkswap /swapfile # init /swapfile
sudo swapon /swapfile # turn on swap
free -h # confirm 16G RAM and 4G swap
Edite /etc/fstab, usando sudo -H gedit /etc/fstab
ou sudo pico /etc/fstab
.
Confirme esta linha /swapfile em /etc/fstab... e não confirme nenhuma outra linha de “swap”... use ESPAÇOS nesta linha... confirme SEM TABS...
/swapfile none swap sw 0 0
Observação: Remova outras linhas de troca existentes. Use gparted
para excluir /dev/sda5.
reboot # reboot and verify operation
Atualização nº 1:
memtest
congela quando executado. Suspeite de RAM ruim ou de RAM que precisa ser recolocada em seu soquete. A RAM está nos slots DIMM0-3. Remova os DIMMs1-3 e teste novamente memtest
. Se memtest
for executado sem erros, adicione novamente um DIMM ao slot DIMM1 e teste novamente, etc.
Atualização nº 2:
Parece que sua unidade sdc possui um ou mais blocos defeituosos. Vamos mapear isso...
Nota: NÃO aborte uma varredura de bloco defeituosa!
Nota: NÃO bloqueie mal um SSD
Nota: faça backup de seus arquivos importantes PRIMEIRO!
Nota: isso levará muitas horas
Nota: você pode ter uma falha pendente no HDD
Inicialize em um Ubuntu Live DVD/USB no modo “Try Ubuntu”.
Em terminal
...
sudo fdisk -l
# identifica todas as partições do "sistema de arquivos Linux"
sudo e2fsck -fcky /dev/sdXX
# teste somente leitura
ou
sudo e2fsck -fccky /dev/sdXX
# teste não destrutivo de leitura/gravação(recomendado)
O -k é importante porque salva a tabela de blocos defeituosos anterior e adiciona novos blocos defeituosos a essa tabela. Sem -k, você perde todas as informações anteriores do bloco inválido.
O parâmetro -fccky...
-f Force checking even if the file system seems clean.
-c This option causes e2fsck to use badblocks(8) program to do
a read-only scan of the device in order to find any bad blocks.
If any bad blocks are found, they are added to the bad block
inode to prevent them from being allocated to a file or direc‐
tory. If this option is specified twice, then the bad block scan
will be done using a non-destructive read-write test.
-k When combined with the -c option, any existing bad blocks in the
bad blocks list are preserved, and any new bad blocks found by
running badblocks(8) will be added to the existing bad blocks
list.
-y Assume an answer of `yes' to all questions; allows e2fsck to be
used non-interactively. This option may not be specified at the
same time as the -n or -p options.
Atualização nº 3:
Desde a exclusão de /dev/sda5, você ficou com um buraco não alocado de 28G no seu disco rígido. Você pode adicionar esse espaço a /dev/sda1.
Certifique-se de ter um bom backup de seus arquivos importantes do Ubuntu, pois este procedimento pode corromper ou perder dados.
Tenha estas coisas em mente:
sempre inicie todo o procedimento com a emissão de umtrocaem qualquer partição swap montada e finalize todo o procedimento emitindo umtrocarnessa mesma partição swap
amoveré feito apontando o ponteiro do mouse para o centro de uma partição e arrastando-o para a esquerda/direita com o cursor manual
aredimensionaré feito arrastando o lado esquerdo/direito de uma partição para a esquerda/direita com o cursor de seta direcional
se alguma partição não puder sermovido/redimensionadograficamente, pode ser necessário inserir manualmente os dados numéricos específicos necessários (não faça isso a menos que eu o instrua)
você começa qualquermover/redimensionarclicando com o botão direito na partição no painel inferior da janela principal e selecionando a ação desejada no menu pop-up e finalizando essa ação no novomover/redimensionarjanela
Faça o seguinte...
Observação: se o procedimento não funcionar exatamente como descrevi,PARARimediatamente eNÃOcontinuar.
- inicialize em um Ubuntu Live DVD/USB, no modo “Try Ubuntu”
- começar
gparted
- Excluir/dev/sda2 partição estendida
- Redimensionaro lado direito de /dev/sda1 totalmente para a direita
- clique no ícone Aplicar