Eu tenho um notebook HP Pavilion G7 e quando uso o Ubuntu ele inicializa bem, e quando entro não consigo me conectar ao wifi. Conheço o problema porque diz algo como "desconectado por chave de hardware". Tentei ligar meu switch de hardware, mas ele não quer ligar (é um botão que deveria acender uma luz azul para mostrar que está ligado, mas brilha uma luz laranja, o que significa que está desligado).
Responder1
Você pode tentar usar o seguinte comando no terminal; rfkill desbloquear wi-fi. Depois disso, desligue o interruptor do wifi e ligue-o novamente. Se isso não funcionar, acesse as configurações de rede no canto superior direito da tela com os ícones de notificação. desative a rede e execute o comando "rfkill unblock wifi", depois reative a rede.
Responder2
Senhor, tente seguir este link. Seu Wifi provavelmente foi colocado na lista negra do Ubuntu. Não sei por que permitem isto, mas deram-nos a solução. Veraquipara mais detalhes.
minha trilha na floresta da seguinte maneira....
james@james-HP-Pavilion-g7-Notebook-PC:~$ sudo lspci -nn
[sudo] password for james:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
01:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
james@james-HP-Pavilion-g7-Notebook-PC:~$ sudo apt-get install linux-headers-generic
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
linux-headers-3.5.0-23 linux-headers-3.5.0-23-generic
The following NEW packages will be installed:
linux-headers-3.5.0-23 linux-headers-3.5.0-23-generic linux-headers-generic
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 13.1 MB of archives.
After this operation, 70.0 MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Abort.
james@james-HP-Pavilion-g7-Notebook-PC:~$
Instalando drivers sem fio Broadcom Como instalar a placa sem fio Broadcom / STA (BCM43XX)
voto positivo 7 voto negativo favorito 21 Estou tendo sérios problemas ao instalar os drivers Broadcom para Ubuntu. Funcionou perfeitamente na minha versão anterior, mas agora é impossível. Sou um usuário sem nenhum conhecimento avançado em Linux, então precisaria de explicações claras sobre make, compile, etc. Estava seguindo as instruções do blog a seguir, sem sorte. Como posso fazer o Broadcom BCM4311 Wireless funcionar? Alguém pode me ajudar? Editar: Para o comando: lspci | grep Network, recebo a seguinte mensagem:
06:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
For the command: iwconfig, i get the following:
lo no wireless extensions. eth0 no wireless extensions.
Quando sigo as etapas a seguir (no link acima), NÃO há nenhuma mensagem de erro: 1. Abra o 'Ubuntu Software Center' e pesquise bcm 2. Desinstale o bcm-kernel-source package
3. Certifique-se de que o firmware-b43-installere os b43-fwcutterpacotes estejam instalados
Em seguida, digite no terminal:
cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'
(você pode querer copiar isto) e ver se o termo lista negra bcm43xx existe, se estiver, digite
cd /etc/modprobe.d/ and then sudo gedit blacklist.conf
coloque um # na frente da linha: blacklist bcm43xx e salve o arquivo (eu estava recebendo mensagens de erro no terminal sobre não conseguir salvar, mas na verdade ele salvou corretamente). reboot 'Fim do procedimento' Antes (não Ubuntu 11.04), se eu quisesse conectar wireless, bastava ir até o ícone na parte superior da tela, clicar, mostrar TODA a rede wireless disponível e pronto.
james@james-HP-Pavilion-g7-Notebook-PC:~$ cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
# /etc/modprobe.d/iwlwifi.conf
# iwlwifi will dyamically load either iwldvm or iwlmvm depending on the
# microcode file installed on the system. When removing iwlwifi, first
# remove the iwl?vm module and then iwlwifi.
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
james@james-HP-Pavilion-g7-Notebook-PC:~$
gedit
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
#blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac