Erro ao conectar VPN usando Cisco VPN Client

Question

Aqui está o registro

Cisco Systems VPN Client Version 5.0.07.0410 Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.2.9200  Config file directory: C:\Program Files\Cisco Systems\VPN Client\


 1. 09:53:33.418  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 2. 09:53:33.433  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 3. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE300009B Failed to
    active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

 4. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE30000A7 Unexpected SW
    error occurred while processing Quick Mode
    negotiator:(Navigator:2263)

Qualquer ajuda seria muito apreciada.

Answer 1

• Abra o Editor do Registro, ou sejaregedit
• Vá paraHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva
• Clique duas vezes em DisplayName
• Remova caracteres como @oem14.inf,%VPNVA64_Desc%prefixados para DisplayName

• Tente conectar novamente

Answer 2

Solução 1: Após um pouco de pesquisa e informações de outra comunidade, descobrimos que a Cisco VPN está gravando valores errados na chave de registro da string DisplayName.

Para corrigir o problema, devemos alterar o valor para abaixo: Abra o editor de registro [Do Windows Run type regedit] e vá para o local: HKLM\SYSTEM\CurrentControlSet\Services\CVirtA

For x86, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter" to "Cisco Systems VPN Adapter"
For x64, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter for 64-bit Windows" to "Cisco Systems VPN Adapter for 64-bit Windows"

Agora, tente conectar-se à VPN e ela deverá funcionar sem problemas.