Como transmitir a tela para um computador remoto com gstreamer

Como transmitir a tela para um computador remoto com gstreamer

Quero transmitir a tela do meu computador para outro usando o gstreamer e gerar um endereço rtsp para usar no Opencv.

Tento alguns exemplos para transmitir webcam entre computadores e funciona corretamente:

Command on the remote computer
gst-launch-1.0 -v v4l2src device=/dev/video1 ! "image/jpeg,width=1280, height=720,framerate=30/1" ! rtpjpegpay ! udpsink host=192.168.1.17 port=5001

Command on the local computer
gst-launch-1.0 -e -v udpsrc port=5001 ! application/x-rtp, encoding-name=JPEG,payload=26 ! rtpjpegdepay ! jpegdec ! autovideosink

Eu vi alguns exemplos que exibem a área de trabalho atual, mas não sei como criar um endereço rtsp a partir dele e quando quero apenas transmitir a área de trabalho atual, não recebo nada no outro terminal:

gst-launch-1.0 -v ximagesrc ! video/x-raw,framerate=20/1 ! videoscale ! videoconvert ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtpmp4vpay  ! udpsink host=192.168.1.17 port=5000


NOTHING APPEAR IN THAT TERMINAL
gst-launch-1.0 -v udpsrc port=5000 caps = "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! decodebin ! videoconvert ! autovideosink

Aqui está o resultado que tenho no primeiro terminal:

gst-launch-1.0 -v ximagesrc ! video/x-raw,framerate=20/1 ! videoscale ! videoconvert ! x264enc tune=zerolatency bitrate=500 speed-preset=superfast ! rtph264pay  ! udpsink host=127.0.0.1 port=5000
Définition du pipeline à PAUSED...
Le pipeline est actif et n’a pas besoin de phase PREROLL…
Passage du pipeline à la phase PLAYING…
New clock: GstSystemClock
/GstPipeline:pipeline0/GstXImageSrc:ximagesrc0.GstPad:src: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstVideoScale:videoscale0.GstPad:src: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstVideoConvert:videoconvert0.GstPad:src: caps = video/x-raw, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, format=(string)Y444, pixel-aspect-ratio=(fraction)1/1
Redistribution de latence…
/GstPipeline:pipeline0/GstX264Enc:x264enc0.GstPad:sink: caps = video/x-raw, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, format=(string)Y444, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstVideoConvert:videoconvert0.GstPad:sink: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstVideoScale:videoscale0.GstPad:sink: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = video/x-raw, format=(string)BGRx, width=(int)1920, height=(int)1080, framerate=(fraction)20/1, pixel-aspect-ratio=(fraction)1/1
/GstPipeline:pipeline0/GstX264Enc:x264enc0.GstPad:src: caps = video/x-h264, codec_data=(buffer)01f40028ffe1001e67f40028919680780227e27016a02020280000030008000003014478c19501000468ef3192, stream-format=(string)avc, alignment=(string)au, level=(string)4, profile=(string)high-4:4:4, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)20/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, chroma-site=(string)mpeg2
/GstPipeline:pipeline0/GstRtpH264Pay:rtph264pay0.GstPad:src: caps = application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, packetization-mode=(string)1, profile-level-id=(string)f40028, sprop-parameter-sets=(string)"Z/QAKJGWgHgCJ+JwFqAgICgAAAMACAAAAwFEeMGV\,aO8xkg\=\=", payload=(int)96, ssrc=(uint)1850617788, timestamp-offset=(uint)3214623554, seqnum-offset=(uint)16401, a-framerate=(string)20
/GstPipeline:pipeline0/GstUDPSink:udpsink0.GstPad:sink: caps = application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, packetization-mode=(string)1, profile-level-id=(string)f40028, sprop-parameter-sets=(string)"Z/QAKJGWgHgCJ+JwFqAgICgAAAMACAAAAwFEeMGV\,aO8xkg\=\=", payload=(int)96, ssrc=(uint)1850617788, timestamp-offset=(uint)3214623554, seqnum-offset=(uint)16401, a-framerate=(string)20
/GstPipeline:pipeline0/GstRtpH264Pay:rtph264pay0.GstPad:sink: caps = video/x-h264, codec_data=(buffer)01f40028ffe1001e67f40028919680780227e27016a02020280000030008000003014478c19501000468ef3192, stream-format=(string)avc, alignment=(string)au, level=(string)4, profile=(string)high-4:4:4, width=(int)1920, height=(int)1080, pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)20/1, interlace-mode=(string)progressive, colorimetry=(string)bt709, chroma-site=(string)mpeg2
/GstPipeline:pipeline0/GstRtpH264Pay:rtph264pay0: timestamp = 3214623853
/GstPipeline:pipeline0/GstRtpH264Pay:rtph264pay0: seqnum = 16401

E no terminal receptor:

gst-launch-1.0 -v udpsrc port=5000 caps = "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96" ! rtph264depay ! decodebin ! videoconvert ! autovideosink
Définition du pipeline à PAUSED...
Le pipeline est actif et n’a pas besoin de phase PREROLL…
/GstPipeline:pipeline0/GstUDPSrc:udpsrc0.GstPad:src: caps = application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96
/GstPipeline:pipeline0/GstRtpH264Depay:rtph264depay0.GstPad:sink: caps = application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, payload=(int)96
Passage du pipeline à la phase PLAYING…
New clock: GstSystemClock



Responder1

Você está usando rtpmp4vpaypara o lado da codificação, mas rtph264depaypara o receptor. Tente usar rtph264paypara empacotar em pacote RTP. Estou até surpreso que funcione com x624enc, que gera um fluxo h264...

Tente também remover decodebino que não deve ser útil aqui.

informação relacionada