Sou bastante novo no LaTeX, mas decidi usar o arquivo .sty que o departamento de ciência da computação da minha escola tinha para o estilo de tese da universidade. Acontece que há vários problemas com o formato, então tenho tentado corrigi-los um por um. Consegui corrigir problemas relacionados ao sumário, mas estou tendo dificuldades para acertar os títulos.
De acordo com as diretrizes da minha escola, os cabeçalhos primário, secundário e terciário devem ser os seguintes:
mas está saindo assim:
Aqui está o código no arquivo .sty que controla o formato do cabeçalho da seção:
\def\section{\@startsection{section}{1}{\z@}
{-7ex}{0.01ex \@plus 0.01ex}
{\ssp\centering\underline}}
\def\subsection{\@startsection{subsection}{2}{\z@}
{-5ex}{0.01ex \@plus 0.01ex}
{\ssp\underline}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{-4ex}{-0.01ex}
{\ssp\underline}}
Parece que o\sublinhadotag bagunça tudo, porque quando removida, o cabeçalho da seção fica centralizado e o cabeçalho da subseção deixa de ter recuo. Como posso corrigir esse código para que o texto possa ser sublinhado sem atrapalhar o restante da formatação? Além disso, é possível anexar automaticamente um ponto final e um espaço no final do título da subsubseção?
ATUALIZAR:
Também estou tendo outro problema na formatação do sumário. Quando eu tive um vspace para adicionar uma linha extra entre o título de um capítulo e a primeira seção abaixo dele, o pacote hyperref parece adicionar a quantidade de espaço que peço no argumento vpsace aos nomes dos capítulos no PDF integrado índice, ou seja, quando abro o PDF na visualização no índice da barra lateral, os capítulos são rotulados como "1emCapítulo 1" em vez de "Capítulo 1", já que passei 1em como argumento para \vspace. A parte específica do código em que isso ocorre é a seguinte:
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\refstepcounter{chapter}
\typeout{\@chapapp\space\thechapter.}
\ifcsufappend{\addcontentsline{toc}{chapter}{\protect
\numberline{APPENDIX \thechapter.}\hspace*{0.95in}#1}}
\else{\addcontentsline{toc}{chapter}{\vspace{1em}\protect\numberline{\thechapter.}#1} }\fi \else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
% \addtocontents{lof}{\protect\addvspace{10pt}} - do not add space on toc
%\addtocontents{lot}{\protect\addvspace{10pt}} \if@twocolumn
\if@twocolumn
\@topnewpage[\@makechapterhead{#2}]
\else \@makechapterhead{#2}
\@afterheading \fi}
\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
Aqui está um documento MWE:
\documentclass[12pt]{report}
\usepackage{csuf-thesis}
\usepackage{hyperref}
\hypersetup{colorlinks=false}
\nocopyright
\setcounter{secnumdepth}{0}
\begin{document}
\maketitle
\begin{abstract}
Abstract goes here
\end{abstract}
\tableofcontents
\startbody
%% Assuming these .tex files exist...
\include{Chapter1}
\include{Chapter2}
\include{Chapter3}
\include{Chapter4}
\end{document}
Onde ChapterX.tex se parece com isto:
\chapter{CHAPTER X}
\section{Primary Heading}
\subsection{Secondary Heading}
\subsubsection{Tertiary Heading}
Aqui está o arquivo csuf-thesis.sty completo com o qual estou trabalhando atualmente:
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% %%
%% This is a LaTeX style file created by Dr. Shawn X. Wang for CSUF Theses. %%
%% Several existing style files were referenced during the process, in particular, %%
%% University of California, Princeton University, Harvard University, Standford %%
%% University and New Jersey Institute of Technology. %%
%% %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%
% DECLARATIONS %
%%%%%%%%%%%%%%%%
\newif\ifcsufcopyright % copyright page switch
\newif\ifcsufappend % appendixswitch
\csufcopyrightfalse
\csufappendfalse
\def\@chapapp{CHAPTER} %caps for chapter
\gdef\csufthisdegree{Master of Arts}
\def\thisdegree#1{\gdef\csufthisdegree{#1}}
\gdef\csufthesistype{Thesis}
\def\thesistype#1{\gdef\csufthesistype{#1}}
%% Changed to reflect the semester by month instead of actual month
\gdef\csufthesissemester{\ifcase\month\or
Fall\or Spring\or Spring\or Spring\or Spring\or Spring\or
Summer\or Summer\or Summer\or Summer\or Fall\or Fall\fi}
\def\thesismonth#1{\gdef\csufthesissemester{#1}}
\gdef\csufthesisyear{\number\year}
\def\thesisyear#1{\gdef\csufthesisyear{#1}}
\gdef\csufmajor{(*MAJOR GOES HERE*)}
\def\major#1{\gdef\csufmajor{#1}}
\gdef\csufadvisor{(*RESEARCH ADVISOR'S NAME*)}
\def\advisor#1{\gdef\csufadvisor{#1}}
\gdef\csufadvisordept{(*Advisor's department*)}
\def\advisordept#1{\gdef\csufadvisordept{#1}}
\gdef\csuffirstcomm{(*first committee member's name*)}
\def\firstcomm#1{\gdef\csuffirstcomm{#1}}
\gdef\csuffirstcommdept{(*first committee member's department*)}
\def\firstcommdept#1{\gdef\csuffirstcommdept{#1}}
\gdef\csufsecondcomm{(*second committee member's name*)}
\def\secondcomm#1{\gdef\csufsecondcomm{#1}}
\gdef\csufsecondcommdept{(*second committee member's department*)}
\def\secondcommdept#1{\gdef\csufsecondcommdept{#1}}
\gdef\csufblank{blank}
% If you want copyright, do the following
\def\yescopyright {
\csufcopyrighttrue
}
\def\nocopyright {
\csufcopyrightfalse
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%
% MARGINS AND PAGE LAYOUT %
%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Pages are numbered at the upper right,
% except that the first page of each chapter
% is numbered at the bottom.
\pagestyle{plain}
% This counter is used to select which sections should be displayed in TOC.
\newcounter{csufsec}
\setcounter{csufsec}{2}
\newcounter{csufcommittee}
\setcounter{csufcommittee}{3}
\newcounter{csufnum}
% We need 1 1/2" margin
% Theses are single-sided, so we don't care about \evensidemargin
\evensidemargin=0in
%%\footheight=0.2in
\footskip=0.5in % default is 0.5 in and page numbers come out too low
\headsep=0.25in % Distance between page nums and text
\itemindent=0.8in
%\marginparsep=10pt
%\marginparwidth=40pt
\oddsidemargin=0.5in % was 0.495
\parindent=0.4in
\textheight=8.22in %changed to make 1" at the bottom
\textwidth=5.95in
\topmargin=-0.175in % Put the pagenumber in the correct place
% Disallow page breaks at hyphens, except where the only alternative
% is a widow or orphan (club)
\brokenpenalty=9900
% Disallow all widows and orphans (clubs)
\widowpenalty=10000
\clubpenalty=10000
% Use 1.65 times the normal baseline-to-baseline skip
% for the appearance of double spacing
\renewcommand{\baselinestretch}{1.65}
% Print footnotes in small (not tiny) type
\let\footnotesize\small
% Single space tabular environment - cdp
\def\tabular{\ssp \def\@halignto{}\@tabular}
% Redefine the macro used for floats (including figures and tables)
% so that single spacing is used.
% (Note \def\figure{\@float{figure}set single spacing} doesn't work
% because figure has an optional argument)
\def\@xfloat#1[#2]{\ifhmode \@bsphack\@floatpenalty -\@Mii\else
\@floatpenalty-\@Miii\fi\def\@captype{#1}\ifinner
\@parmoderr\@floatpenalty\z@
\else\@next\@currbox\@freelist{\@tempcnta\csname ftype@#1\endcsname
\multiply\@tempcnta\@xxxii\advance\@tempcnta\sixt@@n
\@tfor \@tempa :=#2\do
{\if\@tempa h\advance\@tempcnta \@ne\fi
\if\@tempa t\advance\@tempcnta \tw@\fi
\if\@tempa b\advance\@tempcnta 4\relax\fi
\if\@tempa p\advance\@tempcnta 8\relax\fi
}\global\count\@currbox\@tempcnta}\@fltovf\fi
\global\setbox\@currbox\vbox\bgroup
\def\baselinestretch{1}\@normalsize
\boxmaxdepth\z@
\hsize\columnwidth \@parboxrestore}
% Redefine the macro used for footnotes to use single spacing
\long\def\@footnotetext#1{\insert\footins{\def\baselinestretch{1}\footnotesize
\interlinepenalty\interfootnotelinepenalty
\splittopskip\footnotesep
\splitmaxdepth \dp\strutbox \floatingpenalty \@MM
\hsize\columnwidth \@parboxrestore
\edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}\@makefntext
{\rule{\z@}{\footnotesep}\ignorespaces
#1\strut \\ }}}
% Define environment 'singlespace', which can be used within other
% environments such as 'quote' (but not 'verbatim') to force single
% spacing. From doublespace.sty; originally credited to MIT.
\def\singlespace{%
\vskip\parskip%
\vskip\baselineskip%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\parskip%
\vskip-\baselineskip%
}
\def\endsinglespace{\par}
% Redefine 'verbatim' so that it always single-spaces.
% If you want 'verbatim' to double-space, simply make your own
% copy of csuf-thesis.sty in which this code is commented out.
\def\@verbatim{%
\trivlist%
\vskip\topskip%
%\vskip\parskip%
%\setlength{\partopsep}{0pt}%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\topskip%
%\vskip-\parskip%
\item[]\if@minipage\else\vskip\parskip\fi
\leftskip\@totalleftmargin\rightskip\z@
\parindent\z@\parfillskip\@flushglue\parskip\z@
\@tempswafalse \def\par{\if@tempswa\hbox{}\fi\@tempswatrue\@@par}
\obeylines \tt \catcode``=13 \@noligs \let\do\@makeother \dospecials}
\def\verbatim{\@verbatim \frenchspacing\@vobeyspaces \@xverbatim}
\let\endverbatim=\endtrivlist
%%%%%%%%%%%%%%%%%%%%
% CHAPTER HEADINGS %
%%%%%%%%%%%%%%%%%%%%
% Centered at top of page, in imitation of Turabian et al.
% This code is from rep12.sty, somewhat modified.
% \@makechapterhead {TEXT} : Makes the heading for the \chapter command.
%
\def\@makechapterhead#1{ % Heading for \chapter command
\vspace*{.38in} % Space at top of text page.
{ \parindent 0pt \raggedright
\ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 THEN
\ssp
\centerline{\@chapapp{} \thechapter} % Print 'CHAPTER' and number.
\par
\vskip 10pt
\fi % Space between number and title.
\ssp
\center % Title.
#1 \par
\nobreak % TeX penalty to prevent page break.
\vskip 27pt % Space between title and text.
} }
% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* command.
%
\def\@makeschapterhead#1{ % Heading for \chapter* command
%\vspace*{50pt} % Space at top of page.
{ \parindent 0pt \raggedright
\ssp
\bf \center % Title
#1 \par
\nobreak % TeX penalty to prevent page break.
\vskip 15pt % Space between title and text.
} }
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This was done to place the appendix chapter title on the TOC. %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\chapter{\clearpage \thispagestyle{plain} \global\@topnum\z@
\@afterindentfalse \secdef\@chapter\@schapter}
\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
\refstepcounter{chapter}
\typeout{\@chapapp\space\thechapter.}
\ifcsufappend{\addcontentsline{toc}{chapter}{\protect
\numberline{APPENDIX \thechapter.}\hspace*{0.95in}#1}}
\else{\addcontentsline{toc}{chapter}{\vspace{1em}\protect\numberline{\thechapter.}#1} }\fi \else
\addcontentsline{toc}{chapter}{#1}\fi
\chaptermark{#1}
% \addtocontents{lof}{\protect\addvspace{10pt}} - do not add space on toc
%\addtocontents{lot}{\protect\addvspace{10pt}} \if@twocolumn
\if@twocolumn
\@topnewpage[\@makechapterhead{#2}]
\else \@makechapterhead{#2}
\@afterheading \fi}
\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
\else \@makeschapterhead{#1}
\@afterheading\fi}
%
% Do the right thing for an appendix
%
\def\appendix{
\par
\setcounter{chapter}{0}
\setcounter{equation}{0}
% \def\@chapapp{}
% \def\thechapter{APPENDIX \Alph{chapter}}
\def\@chapapp{APPENDIX}
\def\thechapter{\Alph{chapter}}
\def\thesection{\Alph{chapter}.\arabic{section}}
\renewcommand{\theequation}{\Alph{chapter}.\arabic{equation}}
\csufappendtrue
\setcounter{csufsec}{0} % do not print appendix sections
% The following lines would do what I want, but they are set BEFORE the
% begin{document} :-(
% \setcounter{tocdepth}{1} % List appendix and sections on toc
% \def\l@chapter{\@dottedtocline{1}{0.000001mm}{10em}}
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% SECTION AND SUBSECTION HEADINGS %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% from rep12.sty - with local mods
\def\section{\@startsection{section}{1}{\z@}
{-7ex}{0.01ex \@plus 0.01ex}
{\ssp\centering\underline}}
\def\subsection{\@startsection{subsection}{2}{\z@}
{-5ex}{0.01ex \@plus 0.01ex}
{\ssp\underline}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{-4ex}{-0.01ex}
{\ssp\underline}}
%%%%%%%%%%%%%%%%%%%%%
% TABLE OF CONTENTS %
%%%%%%%%%%%%%%%%%%%%%
\newsavebox{\toctopbox}
\savebox{\toctopbox}[\textwidth]{Chapter \hfill}
%
\def\tableofcontents{\pagestyle{plain}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
%
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont TABLE OF CONTENTS}\@mkboth {TABLE OF CONTENTS}{TABLE OF CONTENTS}}
% Figure \hfill Page \par %\vspace{1em}
% The next line puts the heading in the **FIRST** toc page. Here it
% goes in with the text.
%\usebox{\toctopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\toc1}
% process the actual entries
\vskip -1em
{\ssp \@starttoc{toc}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
\if@restonecol
\twocolumn\fi
\newpage
\pagestyle{myheadings}\markboth{}{}}
\def\toc1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \par\vspace{2ex}}}
% The following section is for chapter and section titles in the body
% It will not split words
\def\l@part#1#2{\addpenalty{-\@highpenalty}
\addvspace{2.25em plus 11pt} % space above part line
\begingroup
\@tempdima 3em % width of box holding part number,
\parindent \z@ \rightskip \@pnumwidth % used by \numberline
\parfillskip -\@pnumwidth
{\bf
\leavevmode % TeX command to enter horizontal mode
#1\hfil \hbox to\@pnumwidth{\hss #2}
}\par
\nobreak % Never break after part entry
\endgroup}
\def\thedots{\cleaders\hbox{$\m@th \mkern4.5mu . \mkern4.5mu$}\hfill}
% a sinlge line space is added in front of each chapter title in the TOC
\def\l@chapter{\vspace{12pt} \@dottedtocline{1}{0.000001mm}{1.4em}}
%\def\l@section{\@dottedtocline{1}{2em}{2em}}
\def\l@section{\@dottedtocline{1}{1.4em}{2.3em}}
%\def\l@subsection{\@dottedtocline{2}{4em}{3em}}
\def\l@subsection{\@dottedtocline{2}{3.7em}{3em}}
\def\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\def\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\def\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
%%%%%%%%%%%%%%%%%%%
% List of Figures %
%%%%%%%%%%%%%%%%%%%
\newsavebox{\loftopbox}
\savebox{\loftopbox}[\textwidth]{\hspace{-0.8in}Figure \hspace{5.1in}Page}
%
\def\listoffigures{\pagestyle{plain}
\addcontentsline{toc}{chapter}{LIST OF FIGURES}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont LIST OF FIGURES}\@mkboth {LIST OF FIGURES}{LIST OF FIGURES}}
\usebox{\loftopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\lof1}
% process the actual entries
\vskip 1.8ex
{\ssp \@starttoc{lof}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
% and put the lof in the table of contents
%\addcontentsline{toc}{pchapter}{{\sc \listfigurename}}
\if@restonecol
\twocolumn\fi \newpage
\pagestyle{myheadings}\markboth{}{}}
\def\lof1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \usebox{\loftopbox} \par\vspace{2ex}}}
\def\l@figure{\@dottedtocline{1}{0.001em}{2.5em}}
%%%%%%%%%%%%%%%%%%
% List of Tables %
%%%%%%%%%%%%%%%%%%
\newsavebox{\lottopbox}
\savebox{\lottopbox}[\textwidth]{\hspace{-0.8in}Table \hspace{5.2in}Page}
%
\def\listoftables{\pagestyle{plain}
\addcontentsline{toc}{chapter}{LIST OF TABLES}
\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn \fi
%
\global\@colht\textheight\onecolumn
\chapter*{\centerline{\normalfont LIST OF TABLES}\@mkboth {LIST OF TABLES}{LIST OF TABLES}}
% Figure \hfill Page \par %\vspace{1em}
% The next line puts the heading in the **FIRST** toc page. Here it
% goes in with the text.
\usebox{\lottopbox} \par\vspace{1ex}
% No we define @texttop so it will redefine itself when this, the
% **FIRST** page is output.
\gdef\@texttop{\lot1}
% process the actual entries
\vskip 1.8ex
{\ssp \@starttoc{lot}}
%the next 2 lines make sure we are at a page break and reset
% the textheight
\newpage
%\advance\textheight 2ex\global\@colht\textheight\onecolumn
\global\@colht\textheight\onecolumn
%and finally redefine @texttop to do nothing at all
\gdef\@texttop{}
\if@restonecol
\twocolumn\fi \newpage
\pagestyle{myheadings}\markboth{}{}}
\def\lot1{%
\vspace{.6in} %% add top margin to 2in
\gdef\@texttop{
\parindent 0pt \raggedleft \par \usebox{\lottopbox} \par\vspace{2ex}}}
\let\l@table\l@figure
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% TITLE, COPYRIGHT, AND SIGNATURE PAGES %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Code taken from titlepage.sty and modified extensively.
% \maketitle generates title page, copyright page, and signature page.
\def\maketitle{
%
% Title page
%
\newpage
\setcounter{page}{1}
\thispagestyle{empty}
\pagenumbering{roman}
\hspace{.7in}
\begin{minipage}[t]{3in}
{\ssp
\begin{center}
\@title
\end{center}
}
\vspace{-.3in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
A Thesis \\
%\vspace{-3pt}
Presented to the \\
%\vspace{-3pt}
Faculty of \\
%\vspace{-3pt}
California State University, Fullerton \\
\end{center}
\vspace{-.35in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
in Partial Fulfillment \\
%\vspace{-3pt}
of the Requirements for the Degree \\
%\vspace{-3pt}
\csufthisdegree \\
%\vspace{-3pt}
in \\
%\vspace{-3pt}
\csufmajor
\end{center}
\vspace{-.35in}
\begin{tabular}[t]{p{3in}}
\ \\
\hline
\end{tabular}
\vspace{-9pt}
\begin{center}
By \\
%\vspace{-3pt}
\@author \\
\ \\
\ \\
\end{center}
\end{minipage}
%\hspace{.7in}
\begin{minipage}[t]{4.4in}{\ssp
\begin{center}
Thesis Committee Approval: \\
\ \\
\csufadvisor, Chair \\
\csuffirstcomm, \csuffirstcommdept \\
\csufsecondcomm, \csufsecondcommdept \\
\ \\
\ \\
\csufthesissemester, \csufthesisyear
\end{center}
}
\end{minipage}
\ifcsufcopyright
{
\typeout{* }
\typeout{* Generating copyright page. Use \noexpand\nocopyright if you don't want it.}
\typeout{* }
\newpage
\thispagestyle{empty}
\vspace*{3.5in}
\begin{center}
Copyright \copyright ~ \csufthesisyear ~ by
\@author \par
ALL RIGHTS RESERVED\par
\end{center}
\stepcounter{page}
}
\else {
\typeout{* }
\typeout{* No copyright page created (page number has been incremented.)}
\typeout{* Remember to insert a blank page in your thesis in this location.}
\typeout{* MS students use \noexpand\yescopyright if you want one (you will need to file}
\typeout{* paperwork with the United States Copyright Office to make it official).}
\typeout{* }
}
\fi
%
%
%
\setcounter{footnote}{0} % Footnotes start at zero again.
\gdef\@thanks{}
%\gdef\@author{}
\gdef\@title{}
\let\maketitle\relax}
%%%%%%%%%%%%%%%%%%%%
% ABSTRACT PAGE(S) %
%%%%%%%%%%%%%%%%%%%%
% Delimited by \begin{abstract} and \end{abstract}, which
% should enclose only the text of the abstract.
% The abstract should be no more than one page
\def\abstract{
\pagestyle{empty}
\addcontentsline{toc}{chapter}{ABSTRACT}
{\begin{center}
\vspace*{0.25in}
ABSTRACT
\vskip 0.25in
\end{center}
}
\large \normalsize % force return to normal line spacing
\par
}
\def\endabstract{
\thispagestyle{plain}
\vskip 12pt
\par \noindent
\par
\vfil\null
}
\def\dedication{
\newpage
\ssp
\thispagestyle{plain}
\addcontentsline{toc}{chapter}{DEDICATION}
\vspace*{\fill}
\begin{center}
}
\def\enddedication{
\end{center}
\vspace*{\fill}
\dsp
}
\def\acknowledgement{
\large \normalsize % force return to normal line spacing
\par
\dsp
\newpage
\thispagestyle{plain}
\addcontentsline{toc}{chapter}{ACKNOWLEDGMENT}
\vspace*{.27in}
{\par \normalsize \centerline {ACKNOWLEDGMENT}}
\vskip 1em
}
\def\endacknowlegdement{
\newpage
}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% References %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\@bibitem#1{\item\if@filesw \immediate\write\@auxout
{\string\bibcite{#1}{\the\value{\@listctr}}}\fi\ignorespaces
\hskip -0.45in}
\def\@lbibitem[#1]#2{\item[\@biblabel{#1}\hfill]\if@filesw
{\def\protect##1{\string ##1\space}\immediate
\write\@auxout{\string\bibcite{#2}{#1}}}\fi\ignorespaces
\hskip -0.45in}
\def\thebibliography#1{\chapter*{\vspace*{.43in} \centerline{\normalfont REFERENCES}
%\addcontentsline{toc}{chapter}{\protect \numberline{REFERENCES}}
\addcontentsline{toc}{chapter}{REFERENCES}
\@mkboth{BIBLIOGRAPHY}{BIBLIOGRAPHY}}\list
% {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
{\arabic{enumi}.}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
\advance\leftmargin\labelsep
\advance\leftmargin 0.45in
\advance\labelsep 0.45in
\usecounter{enumi}}
\def\newblock{\hskip .11em plus .33em minus .07em}
\sloppy\clubpenalty4000\widowpenalty4000
\sfcode`\.=1000\relax \ssp}
\let\endthebibliography=\endlist
\long\def\@makecaption#1#2{
\vskip 10pt
\setbox\@tempboxa\hbox{\small{{\bf #1} #2}}
% \ifdim \wd\@tempboxa >\hsize #1: #2\par \else \hbox
%to\hsize{\hfil\box\@tempboxa\hfil}
% \fi}
\ifdim \wd\@tempboxa >\hsize \small{{\sl #1.} #2}\par \else \hbox
to\hsize{\hfil\box\@tempboxa\hfil}
\fi}
% Wanted () instead of []
%\def\@cite#1#2{({#1\if@tempswa , #2\fi})}
%\def\@biblabel#1{(#1)\hfill}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% This allows single spacing easily in the figure mode - from ucthesis.sty %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\ssp{\def\baselinestretch{1.0}\large\normalsize}
\def\msp{\def\baselinestretch{1.2}\large\normalsize}
\def\dsp{\def\baselinestretch{1.65}\large\normalsize}
\def\startbody{
\pagestyle{myheadings}
\markboth{}{}
\newpage
\pagenumbering{arabic}
\setcounter{chapter}{0}
}
%%%%%%%%%%%%%%
% All done ! %
%%%%%%%%%%%%%%
\typeout{* }
\typeout{* CSUF style sheet loaded.}
\typeout{* --------------------------------------------------------------------------}
Responder1
Supondo que você não precise das versões em estrela de \sectionet al:
\documentclass[12pt]{report}
\usepackage{csuf-thesis}
\usepackage{hyperref}
\hypersetup{colorlinks=false}
\nocopyright
\setcounter{secnumdepth}{0}
\makeatletter
\def\section#1{\@startsection{section}{1}{\z@}
{-7ex}{2ex \@plus 0.01ex}
{\centering\ssp}{\underline{#1}}}
\def\subsection#1{\@startsection{subsection}{2}{\z@}
{-5ex}{1ex \@plus 0.01ex}
{\ssp}{\underline{#1}}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}
{4ex}{-1em}
{\kern\parindent\ssp\underline }}
\makeatother
[ ... ]
