Estou tentando aplicar o código em Cor gradiente em uma célula de uma tabela
Porém, quando quero colocar a tabela na próxima página com \newpage, as cores ficam para trás, enquanto a tabela se move.
Veja esta foto:
Como posso fazer com que as cores se movam junto com a mesa quando uso \newpage?
Código adaptado
Este é o código depois que adicionei\newpage
\documentclass[10pt]{article}
\usepackage[margin=2cm]{geometry} % just for the example
\usepackage[frenchb]{babel}
\usepackage[table]{xcolor}
\usepackage{array}
\usepackage{tikz}
\usepackage{lipsum}
\usetikzlibrary{calc,shadings}
% Andrew Stacey's code from
% https://tex.stackexchange.com/a/50054/3954
\makeatletter
\tikzset{%
remember picture with id/.style={%
remember picture,
overlay,
save picture id=#1,
},
save picture id/.code={%
\edef\pgf@temp{#1}%
\immediate\write\pgfutil@auxout{%
\noexpand\savepointas{\pgf@temp}{\pgfpictureid}}%
},
if picture id/.code args={#1#2#3}{%
\@ifundefined{save@pt@#1}{%
\pgfkeysalso{#3}%
}{
\pgfkeysalso{#2}%
}
}
}
\def\savepointas#1#2{%
\expandafter\gdef\csname save@pt@#1\endcsname{#2}%
}
\def\tmk@labeldef#1,#2\@nil{%
\def\tmk@label{#1}%
\def\tmk@def{#2}%
}
\tikzdeclarecoordinatesystem{pic}{%
\pgfutil@in@,{#1}%
\ifpgfutil@in@%
\tmk@labeldef#1\@nil
\else
\tmk@labeldef#1,(0pt,0pt)\@nil
\fi
\@ifundefined{save@pt@\tmk@label}{%
\tikz@scan@one@point\pgfutil@firstofone\tmk@def
}{%
\pgfsys@getposition{\csname save@pt@\tmk@label\endcsname}\save@orig@pic%
\pgfsys@getposition{\pgfpictureid}\save@this@pic%
\pgf@process{\pgfpointorigin\save@this@pic}%
\pgf@xa=\pgf@x
\pgf@ya=\pgf@y
\pgf@process{\pgfpointorigin\save@orig@pic}%
\advance\pgf@x by -\pgf@xa
\advance\pgf@y by -\pgf@ya
}%
}
\newcommand\tikzmark[2][]{%
\tikz[remember picture with id=#2] {#1;}}
\makeatother
% end of Andrew's code
\newcommand\ShadeCell[4][0pt]{%
\begin{tikzpicture}[overlay,remember picture]%
\shade[#4] ( $ (pic cs:#2) + (0pt,2ex) $ ) rectangle ( $ (pic cs:#3) + (0pt,-#1*\baselineskip-.8ex) $ );
\end{tikzpicture}%
}%
\begin{document}
\ShadeCell[14]{start1}{end1}{%
shading=color wheel white center,opacity=.15}
\ShadeCell{start2}{end2}{%
left color=red!20,right color=green!20}
\ShadeCell[13]{start3}{end3}{%
top color=green!20,bottom color=red!20}
\ShadeCell{start4}{end4}{%
left color=blue!20,right color=green!20}
\newpage
\begin{tabular}{| l | p{6cm} | c |}
\hline
Uncolored cell
& \multicolumn{1}{!{\tikzmark{start1}} p{6cm} !{\vrule\tikzmark{end1}}}{\lipsum*[2]}
& Uncolored cell \\
\hline
\multicolumn{1}{!{\vrule\tikzmark{start2}} l !{\vrule\tikzmark{end2}}}{Another colored cell}
& Another uncolored cell & Another uncolored cell \\
\hline
Uncolored cell
& \lipsum[4]
& \multicolumn{1}{!{\tikzmark{start3}} c !{\vrule\tikzmark{end3}}}{Another colored cell} \\
\hline
\multicolumn{2}{!{\vrule\tikzmark{start4}} c !{\vrule\tikzmark{end4}}}{Another merged colored cell}
& Uncolored cell \\
\hline
\end{tabular}
\end{document}
Código original e a imagem original(deCor gradiente em uma célula de uma tabela)
\documentclass[10pt]{article}
\usepackage[margin=2cm]{geometry} % just for the example
\usepackage[frenchb]{babel}
\usepackage[table]{xcolor}
\usepackage{array}
\usepackage{tikz}
\usepackage{lipsum}
\usetikzlibrary{calc,shadings}
% Andrew Stacey's code from
% https://tex.stackexchange.com/a/50054/3954
\makeatletter
\tikzset{%
remember picture with id/.style={%
remember picture,
overlay,
save picture id=#1,
},
save picture id/.code={%
\edef\pgf@temp{#1}%
\immediate\write\pgfutil@auxout{%
\noexpand\savepointas{\pgf@temp}{\pgfpictureid}}%
},
if picture id/.code args={#1#2#3}{%
\@ifundefined{save@pt@#1}{%
\pgfkeysalso{#3}%
}{
\pgfkeysalso{#2}%
}
}
}
\def\savepointas#1#2{%
\expandafter\gdef\csname save@pt@#1\endcsname{#2}%
}
\def\tmk@labeldef#1,#2\@nil{%
\def\tmk@label{#1}%
\def\tmk@def{#2}%
}
\tikzdeclarecoordinatesystem{pic}{%
\pgfutil@in@,{#1}%
\ifpgfutil@in@%
\tmk@labeldef#1\@nil
\else
\tmk@labeldef#1,(0pt,0pt)\@nil
\fi
\@ifundefined{save@pt@\tmk@label}{%
\tikz@scan@one@point\pgfutil@firstofone\tmk@def
}{%
\pgfsys@getposition{\csname save@pt@\tmk@label\endcsname}\save@orig@pic%
\pgfsys@getposition{\pgfpictureid}\save@this@pic%
\pgf@process{\pgfpointorigin\save@this@pic}%
\pgf@xa=\pgf@x
\pgf@ya=\pgf@y
\pgf@process{\pgfpointorigin\save@orig@pic}%
\advance\pgf@x by -\pgf@xa
\advance\pgf@y by -\pgf@ya
}%
}
\newcommand\tikzmark[2][]{%
\tikz[remember picture with id=#2] {#1;}}
\makeatother
% end of Andrew's code
\newcommand\ShadeCell[4][0pt]{%
\begin{tikzpicture}[overlay,remember picture]%
\shade[#4] ( $ (pic cs:#2) + (0pt,2ex) $ ) rectangle ( $ (pic cs:#3) + (0pt,-#1*\baselineskip-.8ex) $ );
\end{tikzpicture}%
}%
\begin{document}
\ShadeCell[14]{start1}{end1}{%
shading=color wheel white center,opacity=.15}
\ShadeCell{start2}{end2}{%
left color=red!20,right color=green!20}
\ShadeCell[13]{start3}{end3}{%
top color=green!20,bottom color=red!20}
\ShadeCell{start4}{end4}{%
left color=blue!20,right color=green!20}
\begin{tabular}{| l | p{6cm} | c |}
\hline
Uncolored cell
& \multicolumn{1}{!{\tikzmark{start1}} p{6cm} !{\vrule\tikzmark{end1}}}{\lipsum*[2]}
& Uncolored cell \\
\hline
\multicolumn{1}{!{\vrule\tikzmark{start2}} l !{\vrule\tikzmark{end2}}}{Another colored cell}
& Another uncolored cell & Another uncolored cell \\
\hline
Uncolored cell
& \lipsum[4]
& \multicolumn{1}{!{\tikzmark{start3}} c !{\vrule\tikzmark{end3}}}{Another colored cell} \\
\hline
\multicolumn{2}{!{\vrule\tikzmark{start4}} c !{\vrule\tikzmark{end4}}}{Another merged colored cell}
& Uncolored cell \\
\hline
\end{tabular}
\end{document}
Responder1
Você forçou uma quebra de página entre as cores e a tabela, basta colocar \newpageantes das cores, não depois.