☰

O NTP está funcionando ou não?

tag-icon • tag-icon ntpd
O NTP está funcionando ou não?

Não entendo a saída do ntpd.

Minha pergunta: o servidor foohost consegue obter a hora 30.251.32.1?

Aqui está minha configuração:

foohost:/var/log # cat /etc/ntp.conf 
tinker panic 0
disable monitor
restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
restrict 127.0.0.1
restrict -6 ::1
driftfile /var/lib/ntp/drift/driftfile
broadcastdelay 0.008
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
server 30.251.32.1 version 2

Reiniciar: systemctl reiniciar ntpd.service

Exploração madeireira:

Aug 24 10:02:36 foohost systemd[1]: Stopping NTP Server Daemon...
Aug 24 10:02:37 foohost systemd[1]: Stopped NTP Server Daemon.
Aug 24 10:02:37 foohost systemd[1]: Starting NTP Server Daemon...
Aug 24 10:02:37 foohost ntpd[28272]: ntpd [email protected] Thu May 18 14:01:20 UTC 2017 (1): Starting
Aug 24 10:02:37 foohost ntpd[28272]: Command line: /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
Aug 24 10:02:37 foohost ntpd[28273]: proto: precision = 0.053 usec (-24)
Aug 24 10:02:37 foohost ntpd[28273]: restrict default: KOD does nothing without LIMITED.
Aug 24 10:02:37 foohost ntpd[28273]: restrict ::: KOD does nothing without LIMITED.
Aug 24 10:02:37 foohost ntpd[28273]: Listen and drop on 0 v6wildcard [::]:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen and drop on 1 v4wildcard 0.0.0.0:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen normally on 2 lo 127.0.0.1:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen normally on 3 eth0 30.251.32.11:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen normally on 4 eth0:byoip 10.172.19.11:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen normally on 5 lo [::1]:123
Aug 24 10:02:37 foohost ntpd[28273]: Listen normally on 6 eth0 [fe80::250:56ff:fe30:94%2]:123
Aug 24 10:02:37 foohost ntpd[28273]: Listening on routing socket on fd #23 for interface updates
Aug 24 10:02:37 foohost start-ntpd[28267]: Starting network time protocol daemon (NTPD)
Aug 24 10:02:37 foohost systemd[1]: Started NTP Server Daemon.

O servidor foohost consegue obter a hora 30.251.32.1?

Responder1

Se a resposta do @Sirch for muito difícil de ler, você sempre poderá usarntpstat.

Por exemplo:

> ntpstat
synchronised to NTP server (185.233.106.45) at stratum 3
   time correct to within 39 ms
   polling server every 1024 s

Ou ainda “mais fácil”: timedatectl status.

> timedatectl status
      Local time: Fri 2018-08-24 10:35:05 CEST
  Universal time: Fri 2018-08-24 08:35:05 UTC
        RTC time: Fri 2018-08-24 08:35:05
       Time zone: Europe/Berlin (CEST, +0200)
 Network time on: yes
NTP synchronized: yes
 RTC in local TZ: no

Claro que você ainda precisa saberalgunsFundamentos.

Responder2

Uma maneira fácil de ver seria:

ntpq -c peers

Você verá quais servidores foram contatados, há quanto tempo e quantas vezes eles responderam nas últimas 15 tentativas.

informação relacionada