Estou executando o debian 8 e preciso atualizar o bluez e o kernel do debian. Bluez precisa estar acima de 5,23 para que um bluetooth com LE ou dispositivo bluetooth inteligente funcione.
Estou em um Mac e preciso instalar os drivers wireless da Broadcom para que meu wifi funcione.
Se eu evitar atualizar meu kernel para 4.2.0 em backports, posso seguir as etapas descritasaquie então meu wifi funciona bem, mas meu dispositivo bluetooth não funciona.
se eu atualizar para o kernel mais recente, meu dispositivo bluetooth não funcionará. Funciona quando eu emparelho e conecto com o bluetoothctl, mas assim que paro de mover o mouse, ele desemparelha e morre. Tenho que emparelhar/reconectar novamente. Este problema desapareceu com o novo kernel.
Então, eu gostaria de tentar consertar meu wifi.
Sigo o passo dowiki
quando tento executar sudo modprobe wl
recebo modprobe: FATAL: Módulo wl não encontrado.
uname -r 4.2.0-0.bpo.1-amd64
cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
retorna isso e mostra que há alguns erros de construção:
sudo apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') broadcom-sta-dkms
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
broadcom-sta-dkms linux-headers-amd64
0 upgraded, 2 newly installed, 0 to remove and 29 not upgraded.
Need to get 0 B/2,175 kB of archives.
After this operation, 14.5 MB of additional disk space will be used.
Selecting previously unselected package broadcom-sta-dkms.
(Reading database ... 171210 files and directories currently installed.)
Preparing to unpack .../broadcom-sta-dkms_6.30.223.248-3_all.deb ...
Unpacking broadcom-sta-dkms (6.30.223.248-3) ...
Selecting previously unselected package linux-headers-amd64.
Preparing to unpack .../linux-headers-amd64_3.16+63_amd64.deb ...
Unpacking linux-headers-amd64 (3.16+63) ...
Setting up broadcom-sta-dkms (6.30.223.248-3) ...
Loading new broadcom-sta-6.30.223.248 DKMS files...
First Installation: checking all kernels...
Building only for 4.2.0-0.bpo.1-amd64
Building initial module for 4.2.0-0.bpo.1-amd64
Error! Bad return status for module build on kernel: 4.2.0-0.bpo.1-amd64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log for more information.
Setting up linux-headers-amd64 (3.16+63) ...
blubee@naibed:~$ vi /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
blubee@naibed:~$ cat /var/lib/dkms/broadcom-sta/6.30.223.248/build/make.log
DKMS make.log for broadcom-sta-6.30.223.248 for kernel 4.2.0-0.bpo.1-amd64 (x86_64)
Sat Oct 31 10:52:17 CST 2015
/bin/sh: 1: [: Illegal number:
/bin/sh: 1: [: Illegal number:
Wireless Extension is the only possible API for this kernel version
Using Wireless Extension API
KBUILD_NOPEDANTIC=1 make -C /lib/modules/4.2.0-0.bpo.1-amd64/build M=`pwd`
make[1]: Entering directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
Kernel architecture is X86_64
LD /var/lib/dkms/broadcom-sta/6.30.223.248/build/built-in.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/shared/linux_osl.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_linux.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_iw.o
CC [M] /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_key’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1390:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type
memcpy(params.key, key.data, params.key_len);
^
In file included from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string.h:4:0,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/string.h:17,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/bitmap.h:8,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/cpumask.h:11,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/cpumask.h:4,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/msr.h:10,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/processor.h:20,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/thread_info.h:49,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/thread_info.h:54,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/preempt.h:6,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/preempt.h:64,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/spinlock.h:50,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/seqlock.h:35,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/time.h:5,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/stat.h:18,
from /usr/src/linux-headers-4.2.0-0.bpo.1-common/include/linux/module.h:10,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/include/linuxver.h:40,
from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:26:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/arch/x86/include/asm/string_64.h:34:14: note: expected ‘void *’ but argument is of type ‘const u8 *’
extern void *memcpy(void *to, const void *from, size_t len);
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_cfg80211_get_station’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: error: ‘STATION_INFO_TX_BITRATE’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_TX_BITRATE;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1444:20: note: each undeclared identifier is reported only once for each function it appears in
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1457:20: error: ‘STATION_INFO_SIGNAL’ undeclared (first use in this function)
sinfo->filled |= STATION_INFO_SIGNAL;
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: At top level:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: initialization from incompatible pointer type
.get_station = wl_cfg80211_get_station,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:1778:2: warning: (near initialization for ‘wl_cfg80211_ops.get_station’)
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_inform_single_bss’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: incompatible type for argument 3 of ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘enum cfg80211_bss_frame_type’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:3: warning: passing argument 7 of ‘cfg80211_inform_bss’ makes integer from pointer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘u16’ but argument is of type ‘const u8 *’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2015:26: warning: passing argument 8 of ‘cfg80211_inform_bss’ makes pointer from integer without a cast
(const u8 *)notify_ie, notify_ielen, signal, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: expected ‘const u8 *’ but argument is of type ‘size_t’
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2013:9: error: too few arguments to function ‘cfg80211_inform_bss’
cbss = cfg80211_inform_bss(wiphy, channel, (const u8 *)(bi->BSSID.octet),
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4029:1: note: declared here
cfg80211_inform_bss(struct wiphy *wiphy,
^
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_notify_connect_status’:
/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:2050:4: error: too few arguments to function ‘cfg80211_disconnected’
cfg80211_disconnected(ndev, 0, NULL, 0, GFP_KERNEL);
^
In file included from /var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.c:33:0:
/usr/src/linux-headers-4.2.0-0.bpo.1-common/include/net/cfg80211.h:4584:6: note: declared here
void cfg80211_disconnected(struct net_device *dev, u16 reason,
^
/usr/src/linux-headers-4.2.0-0.bpo.1-common/scripts/Makefile.build:263: recipe for target '/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o' failed
make[4]: *** [/var/lib/dkms/broadcom-sta/6.30.223.248/build/src/wl/sys/wl_cfg80211_hybrid.o] Error 1
/usr/src/linux-headers-4.2.0-0.bpo.1-common/Makefile:1403: recipe for target '_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build' failed
make[3]: *** [_module_/var/lib/dkms/broadcom-sta/6.30.223.248/build] Error 2
Makefile:146: recipe for target 'sub-make' failed
make[2]: *** [sub-make] Error 2
Makefile:8: recipe for target 'all' failed
make[1]: *** [all] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.2.0-0.bpo.1-amd64'
Makefile:158: recipe for target 'all' failed
make: *** [all] Error 2
esse é o log de construção. Existe alguma maneira razoável de eu poder ter meu wifi e bluetooth LE também?
Encontrei esta lista de bugs no rastreador de bugs do Ubuntu:https://bugs.launchpad.net/ubuntu/+source/broadcom-sta/+bug/1504975
Parece que não sou o único a enfrentar esse problema.
Responder1
https://launchpad.net/~longsleep/+archive/ubuntu/bcmwl Deveria consertar o wifi
Você deve ser capaz de instalá-lo com
sudo add-apt-repository ppa:longsleep/bcmwl
sudo apt-get update
sudo apt-get install bcmwl-kernel-sourceReinício