Atualmente tenho um NAS para nossa casa (chamado Waitress) que executa o Debian 11 com Samba usando SMB 3.1.1. Ele está conectado a um HDD USB-SS de 1 TB. Eu também tenho uma máquina Ubuntu que é meu próprio laptop (chamada Rox). O objetivo é usar o Waitress para armazenar todos os arquivos no meu diretório pessoal. Estou fazendo isso criando um compartilhamento Samba no Waitress com os arquivos armazenados no disco rígido externo (formatado com ext4). Então no Rox eu monto o compartilhamento em /home/<my username>. Tenho uma conta no Waitress com o mesmo nome de usuário e senha da minha conta no Rox.
O recurso de sincronização de senha Unix do Samba está funcionando bem e posso acessar facilmente os arquivos fazendo login em minha conta no Waitress via SMB. O problema está no recurso de sincronização de permissão do Unix. Não entendo por que minha configuração do Samba e do fstab não estão sincronizando as permissões corretamente e estou solicitando ajuda nesse aspecto.
Minha /etc/samba/smb.confgarçonete:
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = mclean.net
#### Networking ####
# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes
#### Debugging/Accounting ####
# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Cap the size of the individual log files (in KiB).
max log size = 1000
# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
logging = file
# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d
####### Authentication #######
# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
server role = standalone server
obey pam restrictions = yes
# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes
# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes
# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user
########## Domains ###########
#
# The following settings only takes effect if 'server role = classic
# primary domain controller', 'server role = classic backup domain controller'
# or 'domain logons' is set
#
# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U
# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd
# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g
############ Misc ############
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap config * : backend = tdb
; idmap config * : range = 3000-7999
; idmap config YOURDOMAINHERE : backend = tdb
; idmap config YOURDOMAINHERE : range = 100000-999999
; template shell = /bin/bash
# Setup usershare options to enable non-root users to share folders
# with the net usershare command.
# Maximum number of usershare. 0 means that usershare is disabled.
# usershare max shares = 100
# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
#======================= Share Definitions =======================
[BackupServer]
unix extensions = yes
comment = Backup Server
path = /home/<my username>/harddrive/homefolder
browseable = yes
read only = no
writable = yes
Minha /etc/fstabconfiguração no Rox:
//<waitress hostname>/BackupServer /home/<my username> smb3 user=<my username>,unix,vers=3.1.1 0 0
Todos os arquivos no diretório inicial do Waitress pertencem ao meu usuário e têm permissões de leitura e gravação para meu usuário e meu grupo. Isso deve permitir que eles sejam acessíveis a partir do Rox. No entanto, no Rox, as permissões mostram o usuário e grupo proprietário como root e as permissões rwxr-xr-x. Links simbólicos também não funcionam. Eu esperaria que os links simbólicos funcionassem, os arquivos fossem de minha propriedade e as permissões rwxrwxr-x.
Responder1
Decidi não usar o Samba para conectar meus computadores Linux porque parece que não foi feito para situações como a minha. Continuarei usando o Samba para Windows e MacOS, mas usarei o NFS para Linux.