Quero conectar (para aprendizado, nada sério), dois servidores asterisk via ISDN PRI. O primeiro servidor atuará como "telco", assim como o pri_net, o segundo servidor será o cpe, então usarei o pri_cpe.
As cartas são
pbx1-net: Digium TE205P pbx2-cpe: Openvox D210P
Ambos os servidores/PBX usam drivers Debian 11 e dahdi 2.11
No PBX-net é dahdi/system.conf
# Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
fxoks=1
echocanceller=mg2,1
fxoks=2
echocanceller=mg2,2
# channel 3, WCTDM/4/2, no module.
fxsks=4
echocanceller=mg2,4
# Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
span=2,0,0,ccs,hdb3,crc4
# termtype: te
bchan=5-19,21-35
dchan=20
echocanceller=mg2,5-19,21-35
# Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=3,0,0,ccs,hdb3,crc4
# termtype: te
bchan=36-50,52-66
dchan=51
echocanceller=mg2,36-50,52-66
# Global data
loadzone = it
defaultzone = it
este é o /etc/asterisk/chan_dahdi.conf no pbx-net
[trunkgroups]
[channels]
language=it
context=local
switchtype=euroisdn
signalling=pri_net
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes ;se usi nt ptmp metti no
canpark=yes
cancallforward=yes
callreturn=yes
context=local
echocancel=yes
channel => 1-15,17-31
echocancelwhenbridged=yes
group=1
callgroup=1
pickupgroup=1
immediate=no
#include /etc/asterisk/dahdi-channels.conf
Este é o /etc/asterisk/dahdi-channels.conf no pbx-net
; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
;;; line="1 WCTDM/4/0"
signalling=fxo_ks
callerid="Channel 1" <4001>
mailbox=4001
group=5
context=from-dahdi
channel => 1
;;; line="2 WCTDM/4/1"
signalling=fxo_ks
callerid="Channel 2" <4002>
mailbox=4002
group=5
context=from-dahdi
channel => 2
;;; line="4 WCTDM/4/3"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-dahdi
channel => 4
; Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1"
group=0,12
context=from-dahdi
switchtype = euroisdn
signalling = pri_net
channel => 5-19,21-35
; Span 3: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=0,13
context=from-dahdi
switchtype = euroisdn
signalling = pri_net
channel => 36-50,52-66
No lado pbx-cpe, os arquivos são idênticos, exceto /etc/dahdi/system.conf (1,1,0 é 1: span 1: fornecimento de tempo do lado pri_net, 0: cabo é 0-133 pés)
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Global data
loadzone = it
defaultzone = it
Os outros dois arquivos são idênticos, exceto pri_net que se tornou pri_cpe.
Agora o problema:
Em pri_cpe bpx, o relatório cli está OK
dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
T2XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS HDB3 0 db (CSU)/0-133 feet (DSX-1)
Em pri_net bpx, o relatório cli está OK
dahdi show status
Description Alarms IRQ bpviol CRC Fra Codi Options LBO
Wildcard TDM400P REV E/F Board 5 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1)
T2XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
T2XXP (PCI) Card 0 Span 2 OK 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1)
Também relatório pri span ok em ambos os lados
lado_net
pri show spans
PRI span 2/0: Up, Active
lado_cpe
pri show spans
PRI span 1/0: Up, Active
Configurei extensions.conf para chamar via pri em ambos os lados
[uscita]
exten => _X.,1,Dial(dahdi/g12/${EXTEN})
exten => _X.,n,Hangup
Quando tento fazer uma chamada nos dois consoles aparecem essas mensagens de erro
No lado pri_net [1º de maio 18:57:50] AVISO [2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Evento DAHDI obtido: HDLC Bad FCS (8) no canal D do intervalo 2
No lado pri_cpe
[May 1 18:58:07] NOTICE[1489]: chan_dahdi.c:2777 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 1
[May 1 18:58:07] NOTICE[1489]: chan_dahdi.c:2777 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 1
[May 1 18:58:07] NOTICE[1489]: chan_dahdi.c:2777 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 1
novamente no lado pri_net
== Primary D-Channel on span 2 down
[May 1 18:59:32] WARNING[2541]: sig_pri.c:1212 pri_find_dchan: Span 2: D-channel is down!
[May 1 18:59:33] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
[May 1 18:59:40] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
[May 1 18:59:42] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
[May 1 18:59:43] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
[May 1 18:59:43] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
[May 1 18:59:45] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
== Primary D-Channel on span 2 up
[May 1 18:59:58] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
[May 1 18:59:58] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
[May 1 18:59:59] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
-- Registered SIP 'telefono3' at 192.168.0.2:59897
== Using SIP RTP CoS mark 5
-- Executing [511@local:1] Dial("SIP/telefono3-00000000", "dahdi/g12/511") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called dahdi/g12/511
[May 1 19:00:09] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
== Primary D-Channel on span 2 down
[May 1 19:00:10] WARNING[2541]: sig_pri.c:1212 pri_find_dchan: Span 2: D-channel is down!
[May 1 19:00:11] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
== Primary D-Channel on span 2 up
-- Span 2: Channel 0/1 got hangup, cause 18
-- Hungup 'DAHDI/i2/511-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [511@local:2] Hangup("SIP/telefono3-00000000", "") in new stack
== Spawn extension (local, 511, 2) exited non-zero on 'SIP/telefono3-00000000'
[May 1 19:00:18] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Bad FCS (8) on D-channel of span 2
[May 1 19:00:21] NOTICE[2541]: chan_dahdi.c:2780 my_handle_dchan_exception: Got DAHDI event: HDLC Abort (6) on D-channel of span 2
Eu tento essas soluções
Solution number 1: the card is broken, I bought another PRI card = FAIL
Solution number 2: change the pci slot of card pri_net side, and / or pri_cpe side = FAIL
Solution number 3: use a different dahdi version = FAIL
Solution number 4: use pridiallocalplan=unknown and pridialplan=unknown = FAIL
Solution number 5: revert pri_net pri_cpe roles = FAIL
Solution number 6: try another crossover cable = FAIL(I try 3 cables, two bought, one made by me, and all tested with network tester)
Solution number 7: reboot = FAIL
Solution number 8: remove the analog card from pci_net server = FAIL
Alguém tem alguma sugestão? Obrigado
Responder1
Solução encontrada. O cabo estava ruim, eu entendoeste guiano youtube para fazer o cabo pri e funcionar perfeito, só tive que reiniciar a máquina pri_net.