Eu configurei um servidor openVPN com sub-rede de topologia. Ele contém um conjunto de sub-redes para clientes na região 10.0.XX que são roteadas. Na rede do Servidor existe um cliente (não na VPN) que executa um serviço que os usuários da VPN precisam acessar.
Basicamente, tento dar acesso a diferentes grupos de usuários a um webservice. Tanto o openvpn quanto o webservice são executados em instâncias do docker
QUALQUER AJUDA OU DICA É MUITO APRECIADA JÁ QUE ESTOU LUTANDO COM ISSO JÁ HÁ 2 SEMANAS
Etapas tomadas: Eu configurei o openvpn conf com rotas e com cliente para cliente
server 192.168.255.0 255.255.255.0
verb 3
key /etc/openvpn/pki/private/xxxx.key
ca /etc/openvpn/pki/ca.crt
cert /etc/openvpn/pki/issued/xxxx.crt
dh /etc/openvpn/pki/dh.pem
tls-auth /etc/openvpn/pki/ta.key
key-direction 0
keepalive 10 60
persist-key
persist-tun
proto udp
# Rely on Docker to do port mapping, internally always 1194
port 1194
dev tun
status /tmp/openvpn-status.log
topology subnet
client-config-dir ccd
user nobody
group nogroup
comp-lzo no
client-to-client
### Route Configurations Below
route 192.168.254.0 255.255.255.0
route 10.0.0.0 255.255.255.0
route 10.0.1.0 255.255.255.0
route 10.0.3.0 255.255.255.0
route 10.0.4.0 255.255.255.0
route 10.0.5.0 255.255.255.0
### Push Configurations Below
#push "block-outside-dns"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
push "comp-lzo no"
push "route 172.17.0.0 255.255.255.0"
Eu configurei o encaminhamento definindo
net.ipv4.ip_forward = 1
/etc/sysctl.conf
Eu configurei as regras do iptable
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
-A FORWARD -s 192.168.255.0/24 -d 172.17.0.0/24 -i tun0 -j ACCEPT
-A FORWARD -j ACCEPT
-A FORWARD -s 192.168.255.0/24 -d 10.0.0.0/24 -i tun0 -j ACCEPT
Mas a partir do IP no intervalo do servidor (192.168.255.2) não consigo executar ping ou acessar nada (172.17.0.4 ou 10.0.0.1)
Um traceroute termina no gateway
% traceroute 10.0.0.1
traceroute to 10.0.0.1 (10.0.0.1), 64 hops max, 52 byte packets
1 192.168.88.1 (192.168.88.1) 12.279 ms 3.251 ms 1.882 ms
2 *
aqui também o log do meu cliente
2022-04-30 06:24:38.983758 *Tunnelblick: macOS 12.3.1 (21E258); Tunnelblick 3.8.5beta05 (build 5650)
2022-04-30 06:24:39.446714 *Tunnelblick: Attempting connection with greenhive_master using shadow copy; Set nameserver = 769; monitoring connection
2022-04-30 06:24:39.450786 *Tunnelblick: openvpnstart start greenhive_master.tblk 52399 769 0 1 0 34652464 -ptADGNWradsgnw 2.4.10-openssl-1.1.1j
2022-04-30 06:24:39.477788 *Tunnelblick: openvpnstart starting OpenVPN
2022-04-30 06:24:39.857743 OpenVPN 2.4.10 x86_64-apple-darwin [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [MH/RECVDA] [AEAD] built on Feb 25 2021
2022-04-30 06:24:39.857947 library versions: OpenSSL 1.1.1j 16 Feb 2021, LZO 2.10
2022-04-30 06:24:39.859534 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:52399
2022-04-30 06:24:39.859562 Need hold release from management interface, waiting...
2022-04-30 06:24:40.078894 *Tunnelblick: openvpnstart log:
OpenVPN started successfully.
Command used to start OpenVPN (one argument per displayed line):
/Applications/Tunnelblick.app/Contents/Resources/openvpn/openvpn-2.4.10-openssl-1.1.1j/openvpn
--daemon
--log /Library/Application Support/Tunnelblick/Logs/-SUsers-Srobertk-SLibrary-SApplication Support-STunnelblick-SConfigurations-Sgreenhive_master.tblk-SContents-SResources-Sconfig.ovpn.769_0_1_0_34652464.52399.openvpn.log
--cd /Library/Application Support/Tunnelblick/Users/robertk/greenhive_master.tblk/Contents/Resources
--machine-readable-output
--setenv IV_GUI_VER "net.tunnelblick.tunnelblick 5650 3.8.5beta05 (build 5650)"
--verb 3
--config /Library/Application Support/Tunnelblick/Users/robertk/greenhive_master.tblk/Contents/Resources/config.ovpn
--setenv TUNNELBLICK_CONFIG_FOLDER /Library/Application Support/Tunnelblick/Users/robertk/greenhive_master.tblk/Contents/Resources
--verb 3
--cd /Library/Application Support/Tunnelblick/Users/robertk/greenhive_master.tblk/Contents/Resources
--management 127.0.0.1 52399 /Library/Application Support/Tunnelblick/geeielmngfddkiiidnhcaaaogadlpdifnpjaepip.mip
--management-query-passwords
--management-hold
--script-security 2
--route-up /Applications/Tunnelblick.app/Contents/Resources/client.up.tunnelblick.sh -9 -d -f -m -w -ptADGNWradsgnw
--down /Applications/Tunnelblick.app/Contents/Resources/client.down.tunnelblick.sh -9 -d -f -m -w -ptADGNWradsgnw
2022-04-30 06:24:40.108790 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:52399
2022-04-30 06:24:40.136505 MANAGEMENT: CMD 'pid'
2022-04-30 06:24:40.136565 MANAGEMENT: CMD 'auth-retry interact'
2022-04-30 06:24:40.136595 MANAGEMENT: CMD 'state on'
2022-04-30 06:24:40.136615 MANAGEMENT: CMD 'state'
2022-04-30 06:24:40.136655 MANAGEMENT: CMD 'bytecount 1'
2022-04-30 06:24:40.138068 *Tunnelblick: Established communication with OpenVPN
2022-04-30 06:24:40.152091 *Tunnelblick: >INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info
2022-04-30 06:24:40.154175 MANAGEMENT: CMD 'hold release'
2022-04-30 06:24:40.155529 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
2022-04-30 06:24:40.161486 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
2022-04-30 06:24:40.161545 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
2022-04-30 06:24:40.161718 MANAGEMENT: >STATE:1651292680,RESOLVE,,,,,,
2022-04-30 06:24:40.259123 TCP/UDP: Preserving recently used remote address: [AF_INET]xx.xx.xx.xx:1194
2022-04-30 06:24:40.259272 Socket Buffers: R=[786896->786896] S=[9216->9216]
2022-04-30 06:24:40.259296 UDP link local: (not bound)
2022-04-30 06:24:40.259311 UDP link remote: [AF_INET]xx.xx.xx.xx:1194
2022-04-30 06:24:40.259354 MANAGEMENT: >STATE:1651292680,WAIT,,,,,,
2022-04-30 06:24:40.305386 MANAGEMENT: >STATE:1651292680,AUTH,,,,,,
2022-04-30 06:24:40.305631 TLS: Initial packet from [AF_INET]xx.xx.xx.xx:1194, sid=06c4262e 884c5cdc
2022-04-30 06:24:40.369493 VERIFY OK: depth=1, CN=greenhive
2022-04-30 06:24:40.370236 VERIFY KU OK
2022-04-30 06:24:40.370275 Validating certificate extended key usage
2022-04-30 06:24:40.370301 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
2022-04-30 06:24:40.370323 VERIFY EKU OK
2022-04-30 06:24:40.370346 VERIFY OK: depth=0, CN=VPN.greenhive.at
2022-04-30 06:24:40.439317 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1541', remote='link-mtu 1542'
2022-04-30 06:24:40.439596 WARNING: 'comp-lzo' is present in remote config but missing in local config, remote='comp-lzo'
2022-04-30 06:24:40.439767 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 2048 bit RSA
2022-04-30 06:24:40.439834 [VPN.greenhive.at] Peer Connection Initiated with [AF_INET]xx.xx.xx.xx:1194
2022-04-30 06:24:41.558800 MANAGEMENT: >STATE:1651292681,GET_CONFIG,,,,,,
2022-04-30 06:24:41.559492 SENT CONTROL [VPN.greenhive.at]: 'PUSH_REQUEST' (status=1)
2022-04-30 06:24:41.652600 PUSH: Received control message: 'PUSH_REPLY,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,comp-lzo no,route 172.17.0.0 255.255.255.0,route-gateway 192.168.255.1,topology subnet,ping 10,ping-restart 60,ifconfig 192.168.255.2 255.255.255.0,peer-id 1,cipher AES-256-GCM'
2022-04-30 06:24:41.652921 OPTIONS IMPORT: timers and/or timeouts modified
2022-04-30 06:24:41.652958 OPTIONS IMPORT: compression parms modified
2022-04-30 06:24:41.652985 OPTIONS IMPORT: --ifconfig/up options modified
2022-04-30 06:24:41.653008 OPTIONS IMPORT: route options modified
2022-04-30 06:24:41.653030 OPTIONS IMPORT: route-related options modified
2022-04-30 06:24:41.653051 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
2022-04-30 06:24:41.653072 OPTIONS IMPORT: peer-id set
2022-04-30 06:24:41.653094 OPTIONS IMPORT: adjusting link_mtu to 1624
2022-04-30 06:24:41.653115 OPTIONS IMPORT: data channel crypto options modified
2022-04-30 06:24:41.653139 Data Channel: using negotiated cipher 'AES-256-GCM'
2022-04-30 06:24:41.653816 Outgoing Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2022-04-30 06:24:41.653851 Incoming Data Channel: Cipher 'AES-256-GCM' initialized with 256 bit key
2022-04-30 06:24:41.654722 Opening utun (connect(AF_SYS_CONTROL)): Resource busy (errno=16)
2022-04-30 06:24:41.654977 Opening utun (connect(AF_SYS_CONTROL)): Resource busy (errno=16)
2022-04-30 06:24:41.655036 Opening utun (connect(AF_SYS_CONTROL)): Resource busy (errno=16)
2022-04-30 06:24:41.655181 Opened utun device utun3
2022-04-30 06:24:41.655203 MANAGEMENT: >STATE:1651292681,ASSIGN_IP,,192.168.255.2,,,,
2022-04-30 06:24:41.655217 /sbin/ifconfig utun3 delete
ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
2022-04-30 06:24:41.665109 NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure
2022-04-30 06:24:41.666818 /sbin/ifconfig utun3 192.168.255.2 192.168.255.2 netmask 255.255.255.0 mtu 1500 up
2022-04-30 06:24:41.672645 /sbin/route add -net 192.168.255.0 192.168.255.2 255.255.255.0
add net 192.168.255.0: gateway 192.168.255.2
2022-04-30 06:24:41.679237 MANAGEMENT: >STATE:1651292681,ADD_ROUTES,,,,,,
2022-04-30 06:24:41.679318 /sbin/route add -net 172.17.0.0 192.168.255.1 255.255.255.0
add net 172.17.0.0: gateway 192.168.255.1
06:24:41 *Tunnelblick: **********************************************
06:24:41 *Tunnelblick: Start of output from client.up.tunnelblick.sh
06:24:43 *Tunnelblick: Retrieved from OpenVPN: name server(s) [ 8.8.8.8 8.8.4.4 ], search domain(s) [ ] and SMB server(s) [ ] and using default domain name [ openvpn ]
06:24:44 *Tunnelblick: WARNING: Ignoring DomainName 'openvpn' because DomainName was set manually and '-allowChangesToManuallySetNetworkSettings' was not specified
06:24:44 *Tunnelblick: WARNING: Ignoring ServerAddresses '8.8.8.8 8.8.4.4' because ServerAddresses was set manually and '-allowChangesToManuallySetNetworkSettings' was not specified
06:24:44 *Tunnelblick: Setting search domains to '8.8.8.8 8.8.4.4' because the search domains were not set manually (or are allowed to be changed) and 'Prepend domain name to search domains' was not selected
06:24:45 *Tunnelblick: Saved the DNS and SMB configurations so they can be restored
06:24:45 *Tunnelblick: Did not change DNS ServerAddresses setting of '8.8.8.8 8.8.4.4' (but re-set it)
06:24:45 *Tunnelblick: Changed DNS SearchDomains setting from 'openvpn' to '8.8.8.8 8.8.4.4'
06:24:45 *Tunnelblick: Changed DNS DomainName setting from '' to '8.8.8.8 8.8.4.4'
06:24:45 *Tunnelblick: Did not change SMB NetBIOSName setting of ''
06:24:45 *Tunnelblick: Did not change SMB Workgroup setting of ''
06:24:45 *Tunnelblick: Did not change SMB WINSAddresses setting of ''
06:24:45 *Tunnelblick: DNS servers '8.8.8.8 8.8.4.4' were set manually
06:24:45 *Tunnelblick: DNS servers '8.8.8.8 8.8.4.4' will be used for DNS queries when the VPN is active
06:24:45 *Tunnelblick: The DNS servers include only free public DNS servers known to Tunnelblick.
06:24:45 *Tunnelblick: Flushed the DNS cache via dscacheutil
06:24:45 *Tunnelblick: /usr/sbin/discoveryutil not present. Not flushing the DNS cache via discoveryutil
06:24:45 *Tunnelblick: Notified mDNSResponder that the DNS cache was flushed
06:24:45 *Tunnelblick: Not notifying mDNSResponderHelper that the DNS cache was flushed because it is not running
06:24:45 *Tunnelblick: Setting up to monitor system configuration with process-network-changes
06:24:45 *Tunnelblick: End of output from client.up.tunnelblick.sh
06:24:45 *Tunnelblick: **********************************************
2022-04-30 06:24:45.352811 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
2022-04-30 06:24:45.352830 Initialization Sequence Completed
2022-04-30 06:24:45.352845 MANAGEMENT: >STATE:1651292685,CONNECTED,SUCCESS,192.168.255.2,xx.xx.xx.xx,1194,,
2022-04-30 06:24:46.571157 *Tunnelblick: Routing info stdout:
route to: 8.8.4.4
destination: 8.8.4.4
gateway: 192.168.88.1
interface: en0
flags: <UP,GATEWAY,HOST,DONE,WASCLONED,IFSCOPE,IFREF,GLOBAL>
recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire
0 0 0 0 0 0 1500 0
stderr:
2022-04-30 06:24:46.593014 *Tunnelblick: Warning: DNS server Address 8.8.4.4 is a known public DNS server but is not being routed through the VPN
2022-04-30 06:24:46.680197 *Tunnelblick: Routing info stdout:
route to: 8.8.8.8
destination: 8.8.8.8
gateway: 192.168.88.1
interface: en0
flags: <UP,GATEWAY,HOST,DONE,WASCLONED,IFSCOPE,IFREF,GLOBAL>
recvpipe sendpipe ssthresh rtt,msec rttvar hopcount mtu expire
0 0 0 0 0 0 1500 0
stderr:
2022-04-30 06:24:46.705581 *Tunnelblick: Warning: DNS server Address 8.8.8.8 is a known public DNS server but is not being routed through the VPN
EDIT: aqui a rota ip do servidor
bash-5.0# ip route
default via 172.17.0.1 dev eth0
10.0.0.0/24 via 192.168.255.2 dev tun0
10.0.1.0/24 via 192.168.255.2 dev tun0
10.0.3.0/24 via 192.168.255.2 dev tun0
172.17.0.0/16 dev eth0 proto kernel scope link src
172.17.0.2 192.168.254.0/24 via 192.168.255.2 dev tun0 192.168.255.0/24 dev tun0 proto kernel scope link src 192.168.255.1
Do cliente
172.17/24 192.168.255.2 UGSc utun3
Registro de status
bash-5.0# cat /tmp/openvpn-status.log
OpenVPN CLIENT LIST
Updated,Sun May 1 08:20:48 2022
Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since
at_dev_1,179.115.236.15:34846,23335,23021,Sun May 1 07:14:26 2022
master,179.115.236.15:64773,9574,9889,Sun May 1 07:55:44 2022
ROUTING TABLE
Virtual Address,Common Name,Real Address,Last Ref
192.168.255.2,master,179.115.236.15:64773,Sun May 1 07:55:44 2022
10.0.0.1,at_dev_1,179.115.236.15:34846,Sun May 1 07:14:26 2022
GLOBAL STATS
Max bcast/mcast queue length,1
END
EDITE aqui uma imagem para mostrar a situação Explicação gráfica
Responder1
Portanto, vemos que você não possui rotas internas dentro do OpenVPN. Isso provavelmente vem do fato de você não usar nenhuma irouteinstrução em sua configuração. É por isso que apenas os endereços VPN do servidor e dos clientes são acessíveis entre si.
A estrutura geral da VPN de "sub-rede de topologia" OpenVPN é semelhante a esta da perspectiva da rede (OSI L3):
192.168.255.10[tun] (client2) [eth] 10.0.2.1 --- ...
|
[client2].9 [eth] 10.0.1.1 --- ...
(server) [tun]192.168.255.1 --- .2[server] (OpenVPN process) [client1].5 --- 192.168.255.6[tun] (client1)
[eth] 10.0.0.1 --- ... .13[client3]
|
... --- 10.0.3.1 [eth] (client3) [tun]192.168.255.14
Neste exemplo com três clientes, o processo OpenVPN se parece com um roteador com quatro interfaces (uma voltada para o servidor). Este roteador também precisa de configuração de roteamento! Isso é o que iroutea palavra-chave faz.
Portanto, para que os clientes acessem uma rede 10.0.0.0/24atrás do servidor, eles precisam de uma rota para essa rede por meio de seu respectivo "endereço" voltado para o cliente OpenVPN (por exemplo, client1 need ip route add 10.0.0.0/24 via 192.168.255.5). Essas rotas você empurra com "push route". Para alcançar redes atrás de outros clientes, você faz rotas semelhantes; no meu caso de exemplo, essas redes são consecutivas e todas podem ser condensadas em um único arquivo push "route 10.0.0.0 255.255.252.0".
Além disso, o "roteador" OpenVPN precisa de rotas apropriadas para essas redes através de endereços de "clientes". Por exemplo, a rede 10.0.1.0/24 deve ser roteada via 192.168.255.6. Para fazer isso, um servidor precisa executar um iroute 10.0.1.0 255.255.255.0arquivo client1. Para conseguir isso, você coloca
iroute 10.0.1.0 255.255.255.0
em client1arquivo no diretório de configuração do cliente (CCD), para que seja executado logo após o cliente com o nome comum client1ser autenticado com sucesso.
As redes por trás do servidor não precisam de arquivos iroute. Parece que usa a "interface" do servidor como porta de entrada de último recurso.