У меня проблема с моим сервером proxmox. Иногда я не могу получить доступ к своему серверу. Ping или Ssh не работают, я пытался подключить свой экран к серверу, чтобы проверить, что происходит, но у меня нет изображения. Сервер включен, я слышу, как работает вентилятор.
Я использую proxmox (KVM). Я проверил журнал, но ничего не нашел в журнале между 6:25 утра и 12:50 дня. Я перезапустил с помощью кнопки в 12:50 дня. Можете ли вы сказать, какой журнал я могу проверить, или есть какие-либо идеи?
cat /var/log/messages
Dec 10 18:03:50 pve kernel: [ 181.275269] vmbr0: port 2(fwpr105p0) entered
blocking state
Dec 10 18:03:50 pve kernel: [ 181.275271] vmbr0: port 2(fwpr105p0) entered disabled state
Dec 10 18:03:50 pve kernel: [ 181.275331] device fwpr105p0 entered promiscuous mode
Dec 10 18:03:50 pve kernel: [ 181.275358] vmbr0: port 2(fwpr105p0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.275360] vmbr0: port 2(fwpr105p0) entered forwarding state
Dec 10 18:03:50 pve kernel: [ 181.277620] fwbr105i0: port 2(veth105i0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.277621] fwbr105i0: port 2(veth105i0) entered disabled state
Dec 10 18:03:50 pve kernel: [ 181.277672] device veth105i0 entered promiscuous mode
Dec 10 18:03:50 pve kernel: [ 181.351567] eth0: renamed from vethRS2AYN
Dec 10 18:03:50 pve pve-ha-lrm[2245]: <root@pam> end task UPID:pve:000008C8:0000355B:5DEFCFC9:vzstart:105:root@pam: OK
Dec 10 18:03:50 pve kernel: [ 181.648166] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 10 18:03:50 pve kernel: [ 181.648174] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dec 10 18:03:50 pve kernel: [ 181.648208] fwbr105i0: port 2(veth105i0) entered blocking state
Dec 10 18:03:50 pve kernel: [ 181.648210] fwbr105i0: port 2(veth105i0) entered forwarding state
Dec 11 03:20:53 pve pveupdate[22976]: <root@pam> starting task UPID:pve:000059D3:00334700:5DF05285:aptupdate::root@pam:
Dec 11 03:20:56 pve pveupdate[22976]: <root@pam> end task UPID:pve:000059D3:00334700:5DF05285:aptupdate::root@pam: OK
Dec 11 06:25:13 pve liblogging-stdlog: [origin software="rsyslogd" swVersion="8.24.0" x-pid="1134" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Dec 11 23:54:34 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 11 23:54:40 pve pvedaemon[1934]: <root@pam> starting task UPID:pve:000039B8:00A43BC4:5DF173B0:qmstart:114:root@pam:
Dec 11 23:54:41 pve kernel: [107633.572724] device tap114i0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.593096] fwbr114i0: port 1(fwln114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.593097] fwbr114i0: port 1(fwln114i0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.593157] device fwln114i0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.593186] fwbr114i0: port 1(fwln114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.593188] fwbr114i0: port 1(fwln114i0) entered forwarding state
Dec 11 23:54:41 pve kernel: [107633.595855] vmbr0: port 3(fwpr114p0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.595857] vmbr0: port 3(fwpr114p0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.595921] device fwpr114p0 entered promiscuous mode
Dec 11 23:54:41 pve kernel: [107633.595936] vmbr0: port 3(fwpr114p0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.595937] vmbr0: port 3(fwpr114p0) entered forwarding state
Dec 11 23:54:41 pve kernel: [107633.598134] fwbr114i0: port 2(tap114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.598136] fwbr114i0: port 2(tap114i0) entered disabled state
Dec 11 23:54:41 pve kernel: [107633.598194] fwbr114i0: port 2(tap114i0) entered blocking state
Dec 11 23:54:41 pve kernel: [107633.598195] fwbr114i0: port 2(tap114i0) entered forwarding state
Dec 11 23:54:41 pve pvedaemon[1934]: <root@pam> end task UPID:pve:000039B8:00A43BC4:5DF173B0:qmstart:114:root@pam: OK
Dec 12 00:09:28 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:24:29 pve pvedaemon[1935]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:39:30 pve pvedaemon[1936]: <root@pam> successful auth for user 'root@pam'
Dec 12 00:54:31 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:09:32 pve pvedaemon[1934]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:24:32 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:39:33 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 01:54:34 pve pvedaemon[1521]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:09:35 pve pvedaemon[31283]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:24:36 pve pvedaemon[1521]: <root@pam> successful auth for user 'root@pam'
Dec 12 02:39:37 pve pvedaemon[31249]: <root@pam> successful auth for user 'root@pam'
Dec 12 04:42:01 pve pveupdate[7733]: <root@pam> starting task UPID:pve:00001E5C:00BE8A77:5DF1B709:aptupdate::root@pam:
Dec 12 04:42:03 pve pveupdate[7733]: <root@pam> end task UPID:pve:00001E5C:00BE8A77:5DF1B709:aptupdate::root@pam: OK
Dec 12 06:25:05 pve liblogging-stdlog: [origin software="rsyslogd" swVersion="8.24.0" x-pid="1134" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Dec 12 12:50:45 pve kernel: [ 0.000000] Linux version 4.15.18-23-pve (build@pve) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP PVE 4.15.18-51 (Wed, 13 Nov 2019 11:20:34 +0100) ()
Dec 12 12:50:45 pve kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.18-23-pve root=/dev/mapper/pve-root ro quiet amd_iommu=on
Dec 12 12:50:45 pve kernel: [ 0.000000] KERNEL supported cpus:
Dec 12 12:50:45 pve kernel: [ 0.000000] Intel GenuineIntel
Спасибо
решение1
Проблема была в оперативной памяти, я только что провел тест памяти, и вот уже 7 дней у меня не было сбоев в работе системы.