В настоящее время я пытаюсь отправить статью в FPSAC. Пока все хорошо, но у меня есть следующее предупреждение:
Overfull \vbox (3.26552pt too high) has occurred while \output is active
Я знаю, где это происходит: это заголовок. Класс следующий (который я НЕ МОГУ изменить из-за требований представления):
% Copyright 2018 Nicholas Beaton
\NeedsTeXFormat{LaTeX2e}
\ProvidesClass{FPSAC2021}[2020/09/02 FPSAC 2021 Proceedings class]
\newif \if@submission
\global \@submissionfalse
\DeclareOption{submission}{
\global \@submissiontrue
}
\newif \if@revision
\global \@revisionfalse
\DeclareOption{revision}{
\global \@submissiontrue
\global \@revisiontrue
}
\newif \if@finalversion
\DeclareOption{finalversion}{
\global \@submissiontrue
\global \@revisiontrue
\global \@finalversiontrue
}
\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}}
\ProcessOptions\relax
\LoadClass[letterpaper,12pt]{article}
\RequirePackage{calc}
\RequirePackage[top=1in,bottom=1in,left=1in,right=1in,includehead]{geometry}
\RequirePackage[dvipsnames,table]{xcolor}
\RequirePackage[colorlinks=true,citecolor=RoyalBlue,linkcolor=Red,breaklinks=true]{hyperref}
\RequirePackage{lastpage}
\RequirePackage{amsmath,amsthm,amssymb}
\RequirePackage{graphicx}
\RequirePackage{caption}
\RequirePackage[sc]{mathpazo}
\linespread{1.05}
\RequirePackage[T1]{fontenc}
\RequirePackage[capitalize,nameinlink,noabbrev]{cleveref}
% \setlength \textheight{56pc}
% \setlength \textwidth{35pc}
% \setlength \headsep{30\p@}
% \setlength \footskip{10\p@}
% \setlength \oddsidemargin{10\p@}
% \setlength \evensidemargin{21\p@}
% \setlength \textfloatsep{13\p@ \@plus 2\p@ \@minus 4\p@}
% \setlength \dbltextfloatsep{13\p@ \@plus 2\p@ \@minus 4\p@}
% \setlength \parskip{\z@ \@plus 1\p@}
% \setlength \parindent{10\p@}
% \setlength \topsep{4\p@ \@plus 2\p@ \@minus 1\p@}
\numberwithin{equation}{section}
\def\@title{\relax}
\def\@titlehead{\relax}
% pulling the title information from source
\def \title{\@ifnextchar[{\@gettitletwo}{\@gettitleone}}
\def \@gettitleone#1{\@gettitletwo[#1]{#1}}
\def \@gettitletwo[#1]#2{{
\gdef \@title{#2}
\def \\{\unskip \space \ignorespaces}
\gdef \@titlehead{#1}
}}
\newif \if@marksrequired
\newcommand \addressmark[1]{%
\if@marksrequired%
$^{#1}$%
\fi%
}
\global \@marksrequiredfalse
\gdef \and{\unskip \space \@authorand \space \ignorespaces}
\gdef \@authorand{and}
\def\@author{\relax}
\def\@authorhead{\relax}
% pulling the author information from source
\def \author{\@ifnextchar[{\@getauthortwo}{\@getauthorone}}
\def \@getauthorone#1{\@getauthortwo[#1]{#1}}
\def \@getauthortwo[#1]#2{{
\gdef \@author{#2}
\def \\{\unskip \space \ignorespaces}
\gdef \@authorhead{#1}
}}
\def\@address{\relax}
% pulling address information from source
\def \address{\@getaddress}
\def \@getaddress#1{{
\gdef \@address{#1}
}}
\newif \if@keywordsgiven
\@keywordsgivenfalse
\def\@keywords{\relax}
% pulling keywords information from source
\def \keywords{\@getkeywords}
\def \@getkeywords#1{{
\global \@keywordsgiventrue
\gdef \@keywords{#1}
}}
\def \@received{\relax}
\newcommand \received[1]{
\gdef\@received{Received #1}
}
\def \@revised{\relax}
\newcommand \revised[1]{
\gdef\@revised{revised #1}
}
\def \@accepted{\relax}
\newcommand \accepted[1]{
\def\@accepted{accepted #1}
}
\newif \if@abstractgiven
\@abstractgivenfalse
\def \@abstract{\relax}
\long\def \abstract#1{
\global \@abstractgiventrue
\long\gdef \@abstract{#1}
}
\newif \if@resumegiven
\@resumegivenfalse
\def \@resume{\relax}
\long\def \resume#1{
\global \@resumegiventrue
\long\gdef \@resume{#1}
}
\def \@resumetitle{\relax}
\long\gdef \@resumetitle{Abstract}
\long\def \resumetitle#1{
\long\gdef \@resumetitle{#1}
}
\def \@articlenumber{YY}
\def \articlenumber#1{\gdef \@articlenumber{#1}}
%%%%%%% BIBLATEX STUFF %%%%%%%
%\RequirePackage[maxbibnames=99,backend=bibtex,sorting=nyt]{biblatex}
%\renewbibmacro{in:}{. In:}
%\DeclareFieldFormat[misc]{title}{\mkbibquote{#1}}
%\renewcommand*{\bibfont}{\small}
%\DeclareFieldFormat[article]{volume}{\mkbibbold{#1}}
%\DeclareFieldFormat{url}{\textsc{url}: \href{#1}{#1}}
%\DeclareFieldFormat{doi}{\textsc{doi}: \href{http://dx.doi.org/#1}{#1}}
%\DeclareFieldFormat{eprint:arxiv}{arXiv:\href{https://arxiv.org/abs/#1}{#1}}
%%%%%%%%%%%%%%
\let \pagenumber=\@gobble
\AtBeginDocument{\gdef \@thefirstpage{\thepage}}
\long \gdef \@firsthead{\parbox{\textwidth}{\footnotesize \textit{S\'eminaire Lotharingien de Combinatoire} XX (2021) \hfill \textit{Proceedings of the 33$^\text{rd}$ Conference on Formal Power} \newline Article \#\@articlenumber, \pageref*{LastPage} pp. \hfill \textit{Series and Algebraic Combinatorics (Ramat Gan)}}}
\def \ps@first{
\def \@evenhead{\normalfont \@firsthead \hss}
\def \@oddhead{\normalfont \@firsthead \hss }
}
\global \@twosidetrue
\def \ps@journal{
\let \@mkboth \@gobbletwo
\def \@evenhead{
\def \thanks####1{\relax}%
\small \thepage \hfill \textit{\@authorhead}
}
\def \@oddfoot{}
\def \@oddhead{
\small \textit{\@titlehead} \hfill \thepage
}
\def \@evenfoot{}
}
\renewcommand \maketitle{
\thispagestyle{first}
\renewcommand \thefootnote{\fnsymbol{footnote}}
\@maketitle
\@thanks
\renewcommand\thefootnote{\arabic{footnote}}
\@makeabstract
\setcounter{footnote}{0}
}
\newcommand \printkeywords{
\small \noindent \textbf{Keywords:} \@keywords \par
}
\newenvironment{titlesp}{
\list{}{
\leftmargin 0pt
}\item[]
}{\endlist}
\newenvironment{abstractsp}{
\list{}{
\leftmargin 25pt
\rightmargin 25pt
}\item[]
}{\endlist}
\def \@maketitle{
\begin{titlesp}
\begingroup
\hypersetup{hidelinks}
\@marksrequiredtrue
\null % this is a very annoying way to add space before the title
\vspace{-19\p@}
{\centering \hyphenpenalty=\@M \LARGE \@title \par}
\vspace{12\p@}
{\centering \large \@author \par}
\vspace{6\p@}
% {\centering \small \itshape \@address \par}
\begin{abstractsp} {\small \itshape \@address \par} \end{abstractsp}
% {\small \itshape \@address \par}
% \vspace{6\p@}
% \if@submission{\small{\@received}}\fi%
% \if@revision{\small{; \@revised}}\fi%
% \if@finalversion{\small{; \@accepted}}\fi%
% \if@submission{\small{.}\vspace{0\p@}}\fi
% % \hrule \@height 1\p@
\endgroup
\end{titlesp}
}
\def \@makeabstract{
\begin{abstractsp}
\vspace{-10\p@}
\bgroup
\small
\if@abstractgiven{\noindent{\textbf{Abstract.} \@abstract \par}}\fi
\if@resumegiven{\noindent{\textbf{\@resumetitle.} \@resume \par}}\fi
\if@keywordsgiven{\printkeywords}\fi
\egroup
\end{abstractsp}
% \vspace{8\p@}
% \hrule \@height 1\p@
}
\pagestyle{journal}
\newlength{\capsize}
%\setlength{\capsize}{\textwidth-50pt}
\long \def \@makecaption#1#2{%
%\newlength{\capsize}
\setlength{\capsize}{\textwidth-50pt}
\sbox\@tempboxa{#2}
\ifdim \wd\@tempboxa = 0pt
\def \thistype{#1}
\else
\def \thistype{#1:}
\fi
\vskip \abovecaptionskip%
\small%
\sbox \@tempboxa{\textbf{\thistype} #2}%
\ifdim \wd \@tempboxa > \capsize%
\begin{center}
\begin{minipage}{\capsize}
\textbf{\thistype} #2 \par
\end{minipage}
\end{center}
\else%
\global \@minipagefalse%
\hb@xt@ \hsize{\hfil \box\@tempboxa \hfil}%
\fi%
\vskip \belowcaptionskip%
}
\newcommand \acknowledgments{\section*{Acknowledgments}}
\newcommand \acknowledgements{\section*{Acknowledgements}}
\newcommand \noabstract{\printkeywords}
\endinput
% end of file
Теперь мой код выглядит так:
\documentclass[submission]{FPSAC2021}
\usepackage[french]{babel}
\usepackage{enumitem}
\usepackage{tikz-cd}
\usepackage{ytableau}
\usepackage{extpfeil}
\usepackage{bm}
\usepackage{xcolor}
\title{A new order on integer partitions}
\author{Étienne Tétreault \thanks{\href{mailto: [email protected]}{[email protected]}.}\addressmark{1}}
\address{\addressmark{1}Département de mathématiques, Université du Québec à Montréal}
\received{\today}
\abstract{Considering Schur positivity of differences of plethysms of homogeneous symmetric functions, we introduce a new relation on integer partitions. This relation is conjectured to be a partial order, with its restriction to one part partitions equivalent to the classical Foulkes conjecture. We establish some of the properties of this relation via the construction of explicit inclusion of modules whose characters correspond to the plethysms considered. We also prove some stability properties for the number of irreducible occurring in these modules as $n$ grows.}
\keywords{Representation theory, plethysm, symmetric group}
\begin{document}
\maketitle
\end{document}
Кто-нибудь знает, что можно сделать, чтобы избавиться от этого, не меняя класс? Я недостаточно разбираюсь в пользовательских классах, чтобы точно понять, что происходит...
решение1
Проблема в заголовке, а не в вашем названии, что нормально. Не изменяя класс, вы можете увеличить высоту заголовка в преамбуле, и предупреждение исчезнет. (Не обязательно загружать пакет xcolor. Он уже включен в класс).
Класс специально создан для мероприятия. Возможно, вам следует отправить комментарий организаторам, поскольку та же проблема коснется и других, столь же наблюдательных участников.
\documentclass[submission]{FPSAC2021}
\usepackage[french]{babel}
\usepackage{enumitem}
\usepackage{tikz}
\usetikzlibrary{cd}
%\usepackage{ytableau} % not needed for this MWE
%\usepackage{extpfeil} % not needed for this MWE
%\usepackage{bm} % not needed for this MWE
%\usepackage{xcolor} % not needed, already include in the class
\usepackage{kantlipsum} %dummy text
\setlength{\headheight}{16pt} % <<<< added
\title{A new order on integer partitions}
\author{Étienne Tétreault \thanks{\href{mailto: [email protected]}{[email protected]}.}\addressmark{1}}
\address{\addressmark{1}Département de mathématiques, Université du Québec à Montréal}
\received{\today}
\abstract{Considering Schur positivity of differences of plethysms of homogeneous symmetric functions, we introduce a new relation on integer partitions. This relation is conjectured to be a partial order, with its restriction to one part partitions equivalent to the classical Foulkes conjecture. We establish some of the properties of this relation via the construction of explicit inclusion of modules whose characters correspond to the plethysms considered. We also prove some stability properties for the number of irreducible occurring in these modules as $n$ grows.}
\keywords{Representation theory, plethysm, symmetric group}
\begin{document}
\maketitle
\section{Introduction}
\kant[1-7]
\end{document}
Это вывод с использованием
\setlength{\headheight}{16pt}
и это без него (как в вашем исходном файле) и производя
Overfull \vbox (3.26552pt too high) has occurred while \output is active
Как вы можете видеть, нумерация страниц точно такая же.
