Проблема
Я рисую блоки за пределами помеченных узлов, и блоки не учитывают метки над внутренними узлами.
Вот MWE моего документа:
\documentclass[10pt]{article}
\ExpandArgs{c}\newcommand{new@fontshape}{anything}
\usepackage[russian,indonesian]{babel}
\usepackage{newtx}
\usepackage{linguex}
\usepackage[none]{hyphenat}
\usepackage{geometry}
\usepackage{setspace}
\usepackage{booktabs}
\usepackage{tikz}
\usepackage{tikz-qtree}
\usepackage{gb4e}
\usepackage{adjustbox}
\usetikzlibrary{shapes.geometric, arrows, chains, decorations.pathreplacing, positioning, fit}
\AtBeginDocument{%
\DeclareFontFamilySubstitution{T2A}{\familydefault}{Tempora-TLF}%
}
\primebars
\let\emptyset\varnothing
\geometry{
a4paper,
margin=3cm
}
\newcommand{\?}[1]{\foreignlanguage{russian}{#1}}
\noautomath
\begin{document}
\vspace{5mm}
\section*{Hubungan sintaksis}
\vspace{5mm}
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=2.5cm, text centered, draw=black, text width=3cm]
\tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=1cm, minimum height=1cm, text centered, draw=black, text width=2.5cm]
\tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=green!30]
\tikzstyle{arrow} = [thick,->,>=stealth]
\tikzstyle{line} = [draw, -latex']
\def\layersep{2.5cm}
\begin{adjustbox}{width=\textwidth}
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=10pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Kerusiaan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Binan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=10pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Non-kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=10pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}
\end{adjustbox}
\end{document}
Рамка просто игнорирует тот факт, что метки являются частью каждого узла; она просто проходит сквозь него и не оставляет места над метками.
Хочу, чтобы коробки не проходили через этикетки, а над ними был бы текст. Примерно так:
Как я могу улучшить свой код?
Что я уже сделал
Я знаю, что можно просто изменить sep
in {draw,black,inner sep=10pt,rounded corners=5pt}
, но это создаст неравномерные зазоры между верхним и нижним пространством блока:
\documentclass[10pt]{article}
\ExpandArgs{c}\newcommand{new@fontshape}{anything}
\usepackage[russian,indonesian]{babel}
\usepackage{newtx}
\usepackage{linguex}
\usepackage[none]{hyphenat}
\usepackage{geometry}
\usepackage{setspace}
\usepackage{booktabs}
\usepackage{tikz}
\usepackage{tikz-qtree}
\usepackage{gb4e}
\usepackage{adjustbox}
\usetikzlibrary{shapes.geometric, arrows, chains, decorations.pathreplacing, positioning, fit}
\AtBeginDocument{%
\DeclareFontFamilySubstitution{T2A}{\familydefault}{Tempora-TLF}%
}
\primebars
\let\emptyset\varnothing
\geometry{
a4paper,
margin=3cm
}
\newcommand{\?}[1]{\foreignlanguage{russian}{#1}}
\noautomath
\begin{document}
\vspace{5mm}
\section*{Hubungan sintaksis}
\vspace{5mm}
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=2.5cm, text centered, draw=black, text width=3cm]
\tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=1cm, minimum height=1cm, text centered, draw=black, text width=2.5cm]
\tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=green!30]
\tikzstyle{arrow} = [thick,->,>=stealth]
\tikzstyle{line} = [draw, -latex']
\def\layersep{2.5cm}
\begin{adjustbox}{width=\textwidth}
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=18pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Kerusiaan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Binan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=18pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Non-kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=18pt,rounded corners=5pt}]
\node (kr) [process, label=above:{Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[box,fit=(kr)(bn)] {};
\end{tikzpicture}
\end{adjustbox}
\end{document}
Хочу, чтобы расстояние между верхним блоком от меток и нижним блоком от низа узлов было одинаковым. С добавленными текстами над внешним блоком. Что делать?
решение1
Я заставил это работать с помощью этого кода:
\documentclass[10pt]{article}
\ExpandArgs{c}\newcommand{new@fontshape}{anything}
\usepackage[russian,indonesian]{babel}
\usepackage{newtx}
\usepackage{linguex}
\usepackage[none]{hyphenat}
\usepackage{geometry}
\usepackage{setspace}
\usepackage{booktabs}
\usepackage{tikz}
\usepackage{tikz-qtree}
\usepackage{gb4e}
\usepackage{adjustbox}
\usetikzlibrary{shapes.geometric, arrows, chains, decorations.pathreplacing, positioning, fit}
\AtBeginDocument{%
\DeclareFontFamilySubstitution{T2A}{\familydefault}{Tempora-TLF}%
}
\primebars
\let\emptyset\varnothing
\geometry{
a4paper,
margin=3cm
}
\newcommand{\?}[1]{\foreignlanguage{russian}{#1}}
\noautomath
\begin{document}
\vspace{5mm}
\section*{Hubungan sintaksis}
\vspace{5mm}
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=2.5cm, text centered, draw=black, text width=3cm]
\tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=1cm, minimum height=1cm, text centered, draw=black, text width=2.5cm]
\tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=green!30]
\tikzstyle{arrow} = [thick,->,>=stealth]
\tikzstyle{line} = [draw, -latex']
\def\layersep{2.5cm}
\begin{adjustbox}{width=\textwidth}
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=5pt,rounded corners=5pt}]
\node (kr) [process, fill=gray!15,thin,rounded corners] {Kerusiaan};
\node (bn) [process, fill=gray!60,thin,rounded corners, right of=kr] {Binan};
\node (n1) [inner sep=0pt,draw=none,above=2pt of kr] {Agen};
\node (n2) [inner sep=0pt,draw=none,above=3.5pt of bn] {Sasaran};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center] {Aksi} (bn);
\path (kr) -- node[midway,draw=none,inner sep=2pt, above=12.5mm] {teks} (bn);
\node[box,fit=(kr)(bn)(n1)(n2)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=5pt,rounded corners=5pt}]
\node (kr) [process, fill=gray!60,thin,rounded corners] {Binan};
\node (bn) [process, fill=gray!5,draw,dashed, right of=kr] {Non-kerusiaan};
\node (n1) [inner sep=0pt,draw=none,above=2pt of kr] {Agen};
\node (n2) [inner sep=0pt,draw=none,above=3.5pt of bn] {Sasaran};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\path (kr) -- node[midway,draw=none,inner sep=2pt, above=12.5mm] {teks} (bn);
\node[box,fit=(kr)(bn)(n1)(n2)] {};
\end{tikzpicture}\hspace{1cm}%
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=5pt,rounded corners=5pt}]
\node (kr) [process, fill=gray!60,thin,rounded corners] {Binan};
\node (bn) [process, fill=gray!15,thin,rounded corners, right of=kr] {Kerusiaan};
\node (n1) [inner sep=0pt,draw=none,above=2pt of kr] {Agen};
\node (n2) [inner sep=0pt,draw=none,above=3.5pt of bn] {Sasaran};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\path (kr) -- node[midway,draw=none,inner sep=2pt, above=12.5mm] {teks} (bn);
\node[box,fit=(kr)(bn)(n1)(n2)] {};
\end{tikzpicture}
\end{adjustbox}
\end{document}
В результате получается следующее:
Другие предложения приветствуются!
решение2
Вместо создания трех tikzpicture
сред я создаю только одну, в которой каждая из трех ваших фигурок находится в определенной scope
среде, что позволяет вам точно расположить их по отношению друг к другу.
Затем я даю название каждой метке, Agen
как только она определена.
\documentclass[10pt]{article}
\ExpandArgs{c}\newcommand{new@fontshape}{anything}
\usepackage[russian,indonesian]{babel}
\usepackage{newtx}
\usepackage{linguex}
\usepackage[none]{hyphenat}
\usepackage{geometry}
\usepackage{setspace}
\usepackage{booktabs}
\usepackage{tikz}
\usepackage{tikz-qtree}
\usepackage{gb4e}
\usepackage{adjustbox}
\usetikzlibrary{shapes.geometric, arrows, chains, decorations.pathreplacing, positioning, fit}
\AtBeginDocument{%
\DeclareFontFamilySubstitution{T2A}{\familydefault}{Tempora-TLF}%
}
\primebars
\let\emptyset\varnothing
\geometry{
a4paper,
margin=3cm
}
\newcommand{\?}[1]{\foreignlanguage{russian}{#1}}
\noautomath
\begin{document}
\vspace{5mm}
\section*{Hubungan sintaksis}
\vspace{5mm}
\tikzstyle{startstop} = [rectangle, rounded corners, minimum width=3cm, minimum height=2.5cm, text centered, draw=black, text width=3cm]
\tikzstyle{io} = [trapezium, trapezium left angle=70, trapezium right angle=110, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=blue!30]
\tikzstyle{process} = [rectangle, minimum width=1cm, minimum height=1cm, text centered, draw=black, text width=2.5cm]
\tikzstyle{decision} = [diamond, minimum width=3cm, minimum height=1cm, text centered, draw=black, fill=green!30]
\tikzstyle{arrow} = [thick,->,>=stealth]
\tikzstyle{line} = [draw, -latex']
\def\layersep{2.5cm}
\begin{adjustbox}{width=\textwidth}
\begin{tikzpicture}[node distance=4cm, box/.style = {draw,black,inner sep=5pt,rounded corners=5pt}]
\node (kr) [process, label={[name=label 1]above:Agen}] {Kerusiaan};
\node (bn) [process, right of=kr, label=above:Sasaran] {Binan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[fit=(bn)(label 1),inner sep=0pt] (fit 1){};
\node[box,fit=(kr)(fit 1)] {};
\begin{scope}[xshift=8cm]
\node (kr) [process, label={[name=label 2]above:Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Non-kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[fit=(bn)(label 2),inner sep=0pt] (fit 2){};
\node[box,fit=(kr)(fit 2)] {};
\end{scope}
\begin{scope}[xshift=16cm]
\node (kr) [process, label={[name=label 3]above:Agen}] {Binan};
\node (bn) [process, right of=kr, label=above:{Sasaran}] {Kerusiaan};
\path [line] (kr) -- node [text width=2.5cm,midway,above,align=center ] {Aksi} (bn);
\node[fit=(bn)(label 3),inner sep=0pt] (fit 3){};
\node[box,fit=(kr)(fit 3)] {};
\end{scope}
\end{tikzpicture}
\end{adjustbox}
\end{document}