
У меня установлена последняя версия CentOS 7.
[root@localhost ~]# cat /etc/centos-release
CentOS Linux release 7.4.1708 (Core)
[root@localhost ~]#
Я хотел что-то установить, но wget не был установлен, поэтому, когда я попытался установить wget, я увидел, что yum выдает ошибку.
Я видел, наверное, все темы об этой проблеме в интернете, но, к сожалению, не могу найти своего решения.
[root@localhost ~]# yum update
Loaded plugins: fastestmirror
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
One of the configured repositories failed (CentOS-7 - Base),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=base ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable base
or
subscription-manager repos --disable=base
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=base.skip_if_unavailable=true
failure: repodata/repomd.xml from base: [Errno 256] No more mirrors to try.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
[root@localhost ~]#
Итак, когда я перечисляю репозитории, я получаю это:
[root@localhost ~]# yum repolist all
Loaded plugins: fastestmirror
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
http://mirror.centos.org/centos/7/os/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=centosplus&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/centosplus/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=extras&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/extras/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=updates&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
http://mirror.centos.org/centos/7/updates/x86_64/repodata/repomd.xml: [Errno 14] curl#6 - "Could not resolve host: mirror.centos.org; Unknown error"
Trying other mirror.
repo id repo name status
C7.0.1406-base/x86_64 CentOS-7.0.1406 - Base disabled
C7.0.1406-centosplus/x86_64 CentOS-7.0.1406 - CentOSPlus disabled
C7.0.1406-extras/x86_64 CentOS-7.0.1406 - Extras disabled
C7.0.1406-fasttrack/x86_64 CentOS-7.0.1406 - CentOSPlus disabled
C7.0.1406-updates/x86_64 CentOS-7.0.1406 - Updates disabled
C7.1.1503-base/x86_64 CentOS-7.1.1503 - Base disabled
C7.1.1503-centosplus/x86_64 CentOS-7.1.1503 - CentOSPlus disabled
C7.1.1503-extras/x86_64 CentOS-7.1.1503 - Extras disabled
C7.1.1503-fasttrack/x86_64 CentOS-7.1.1503 - CentOSPlus disabled
C7.1.1503-updates/x86_64 CentOS-7.1.1503 - Updates disabled
C7.2.1511-base/x86_64 CentOS-7.2.1511 - Base disabled
C7.2.1511-centosplus/x86_64 CentOS-7.2.1511 - CentOSPlus disabled
C7.2.1511-extras/x86_64 CentOS-7.2.1511 - Extras disabled
C7.2.1511-fasttrack/x86_64 CentOS-7.2.1511 - CentOSPlus disabled
C7.2.1511-updates/x86_64 CentOS-7.2.1511 - Updates disabled
C7.3.1611-base/x86_64 CentOS-7.3.1611 - Base disabled
C7.3.1611-centosplus/x86_64 CentOS-7.3.1611 - CentOSPlus disabled
C7.3.1611-extras/x86_64 CentOS-7.3.1611 - Extras disabled
C7.3.1611-fasttrack/x86_64 CentOS-7.3.1611 - CentOSPlus disabled
C7.3.1611-updates/x86_64 CentOS-7.3.1611 - Updates disabled
base/7/x86_64 CentOS-7 - Base enabled: 0
base-debuginfo/x86_64 CentOS-7 - Debuginfo disabled
base-source/7 CentOS-7 - Base Sources disabled
c7-media CentOS-7 - Media disabled
centosplus/7/x86_64 CentOS-7 - Plus enabled: 0
centosplus-source/7 CentOS-7 - Plus Sources disabled
cr/7/x86_64 CentOS-7 - cr disabled
extras/7/x86_64 CentOS-7 - Extras enabled: 0
extras-source/7 CentOS-7 - Extras Sources disabled
fasttrack/7/x86_64 CentOS-7 - fasttrack disabled
updates/7/x86_64 CentOS-7 - Updates enabled: 0
updates-source/7 CentOS-7 - Updates Sources disabled
repolist: 0
[root@localhost ~]#
Я не уверен, в чем может быть проблема, это новая установка на моем выделенном сервере VMware/OVH.
У меня установлен другой сервер, который работает нормально, но на этот раз возникла эта проблема.
Кто-нибудь может мне помочь? Я также попытался включить все отключенные строки в etc/yum.repo.d
мой /etc/yum.repos.d/CentOS-Base.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
решение1
Could not resolve host: mirrorlist.centos.org; Unknown error
Это означает, что либо (а) у вас неправильно настроен DNS-сервер, либо (б) конфигурация вашей сети неверна и вы не можете подключиться к DNS-серверу, чтобы проверить имя хоста mirrorlist.centos.org
.
Попробуйте использовать ping 8.8.8.8
. Если это не помогло, попробуйте ping <local-gateway-ip>
. Если это тоже не помогло, значит, конфигурация вашей локальной сети неверна, и вам придется ее проверить.
Если вы можете пинговать 8.8.8.8
, попробуйте использовать host
, nslookup
или dig
для проверки настроек DNS, например host google.com
или dig google.com
. Если это не помогает, вам нужно проверить настройки DNS. Проверьте, /etc/resolv.conf
что настроено.
ОБНОВЛЯТЬ
Поскольку /etc/resolv.conf
пусто, вам нужно настроить DNS-резолвер. Я бы предложил ввести следующее в файл с помощью nano
или vi
(или как вам удобно):
nameserver 9.9.9.9
Сохраните этот файл и повторите попытку yum update
.
При желании вы также можете попробовать другие DNS-хосты, например 8.8.8.8
или 8.8.4.4
или любой из хостов OpenDNS.
решение2
Возможно, у вас где-то возникла проблема с подключением. Вот небольшой процесс, который поможет вам определить, где именно возникла проблема.
Базовые возможности подключения
Проверьте, есть ли на сервере интернет (IP-адрес и правильный маршрут — если не работает, проверьте, ip address
есть ли у вас IP-адрес).
ping 8.8.8.8
Решатель
Проверьте, какие есть резолверы, и пингуйте их.
cat /etc/resolv.conf
У вас должна быть строка с nameserver
IP-адресом. Проверьте, что IP отвечает.
ping xx.xx.xx.xx
Затем выполните nslookup
nslookup mirrorlist.centos.org
Он должен вернуть список IP-адресов. Если нет, ваш DNS-сервер может работать неправильно, вы можете попробовать другой сервер с
nslookup
> server 8.8.8.8
> mirrorlist.centos.org
И проверьте, что на этот раз все работает так, как и ожидалось.
решение3
У меня возникла эта проблема в CentOS Streams, и мне пришлось нажать на «Сети» на верхней панели и подключить проводную сеть.
решение4
Проверьте, есть ли у вас сетевое подключение на этой виртуальной машине. Если у вас есть сетевое подключение с NAT, а затем мост HOST ONLY, то включите ваше сетевое устройство.
У меня была такая же проблема на моей виртуальной машине.