Не удалось запустить LSB: сервер сетевого сканера SANE

Question

Итак, мой сканер печати Samsung SCX-4300 отлично работает через USB, но вместо этого я подключил его к «Сетевому USB-серверу» по следующей ссылке:

https://es.aliexpress.com/item/Wavlink-USB-2-0-red-LRP-servidor-de-impresi-n-USB-Hub-100-Mbps-compartir-una/32933067390.html

Через сервер печать работает нормально, но сканер не работает, и я следовал инструкциям из руководства Ubuntu:

https://help.ubuntu.com/community/SaneDaemonTutorial?action=show&redirect=sane.d+tutorial

1.Итак, я написал на терминале sudo service saned restart:

Failed to restart saned.service: unit saned.service is masked

2.Позже, sudo service saned status:

● saned.service
   Active: inactive (dead)
   Loaded: masked (/dev/null; bad)

Затем я поискал информацию в Интернете и нашел вот этот сайт:systemctl, как размаскировать

3. file /lib/systemd/system/saned.service:

/lib/systemd/system/saned.service: symbolic lik to /dev/null

4.Я набрал текст, чтобы проверить sudo nano /run/systemd/generator.late/saned.service, и обнаружил, что там совершенно пусто.

5. sudo rm /lib/systemd/system/saned.serviceи затем, позже,sudo systemctl daemon-reload

7.и наконец, systemctl status saned:

● saned.service - LSB: SANE network scanner server
 Loaded: loaded (/etc/init.d/saned; generated)
 Active: failed (Result: exit-code) since Sun 2019-06-16 13:19:23 -05; 9min ago
 Docs: man:systemd-sysv-generator(8)
 Process: 923 ExecStart=/etc/init.d/saned start (code=exited, status=1/FAILURE)

jun 16 13:19:22 MS-7529 saned[923]:  * Starting SANE network scanner server saned
jun 16 13:19:23 MS-7529 saned[944]: saned (AF-indep+IPv6) from sane-backends 1.0.27 starting up
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [1] bind failed: Address already in use
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [0] bind failed: Address already in use
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: couldn't bind an address. Exiting.
jun 16 13:19:23 MS-7529 saned[944]: FATAL ERROR; bailing out, waiting for children...
jun 16 13:19:23 MS-7529 saned[944]: bail_out: all children exited
jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Control process exited, code=exited status=1
jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Failed with result 'exit-code'.
jun 16 13:19:23 MS-7529 systemd[1]: Failed to start LSB: SANE network scanner server.

8:Поэтому я пошёл проверить ещё раз sudo nano /run/systemd/generator.late/saned.service:

# Automatically generated by systemd-sysv-generator

[Unit]
Documentation=man:systemd-sysv-generator(8)
SourcePath=/etc/init.d/saned
Description=LSB: SANE network scanner server
Before=multi-user.target
Before=multi-user.target
Before=multi-user.target
Before=graphical.target
After=remote-fs.target
After=dbus.service
After=avahi-daemon.service

[Service]
Type=forking
Restart=no
TimeoutSec=5min
IgnoreSIGPIPE=no
KillMode=process
GuessMainPID=no
RemainAfterExit=yes
SuccessExitStatus=5 6
ExecStart=/etc/init.d/saned start
ExecStop=/etc/init.d/saned stop

9.Я снова набрал sudo service saned status:

● saned.service - LSB: SANE network scanner server
Loaded: loaded (/etc/init.d/saned; generated)
Active: failed (Result: exit-code) since Sun 2019-06-16 13:19:23 -05; 1h 20min ago
Docs: man:systemd-sysv-generator(8)
Process: 923 ExecStart=/etc/init.d/saned start (code=exited, status=1/FAILURE)

jun 16 13:19:22 MS-7529 saned[923]:  * Starting SANE network scanner server saned
jun 16 13:19:23 MS-7529 saned[944]: saned (AF-indep+IPv6) from sane-backends 1.0.27 starting up
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [1] bind failed: Address already in use
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [0] bind failed: Address already in use
jun 16 13:19:23 MS-7529 saned[944]: do_bindings: couldn't bind an address. Exiting.
jun 16 13:19:23 MS-7529 saned[944]: FATAL ERROR; bailing out, waiting for children...
jun 16 13:19:23 MS-7529 saned[944]: bail_out: all children exited
jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Control process exited, code=exited status=1
jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Failed with result 'exit-code'.
jun 16 13:19:23 MS-7529 systemd[1]: Failed to start LSB: SANE network scanner server.

Я не смог найти, как исправить подключение сканера через сервер.

Кто-нибудь знает, как исправить эту ошибку?