您好,我最近在我的 MacBook Pro 上安裝了 Ubuntu 14,但我遇到了顯示設定問題。
我的遊標大部分時間似乎都會閃爍並消失。我還注意到我的顯示設定中出現了兩台顯示器,我可以向您保證我沒有任何外部顯示器連接到我的 MacBook Pro
因此,在谷歌搜尋了一下之後,我發現它必須歸因於一些顯示問題。我注意到解決這個問題的許多方法是使用xrandr
和停用出現的額外顯示。
jeanp3rez@Jean-MacBookPro:~$ xrandr
Screen 0: minimum 320 x 200, current 2704 x 1050, maximum 16384 x 16384
LVDS-1 connected primary 1680x1050+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1680x1050 59.9*+
1400x1050 60.0
1280x1024 59.9
1440x900 59.9
1280x960 59.9
1280x854 59.9
1280x800 59.8
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
DisplayPort-1 disconnected (normal left inverted right x axis y axis)
DisplayPort-2 disconnected (normal left inverted right x axis y axis)
DisplayPort-3 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1024x768+1680+0 (normal left inverted right x axis y axis) 0mm x 0mm
1280x800 60.2 +
1024x768 60.0*
800x600 60.3 56.2
640x480 59.9
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
然而,使用這種方法的大多數結果是,在我的情況下,額外的監視器被調用VGA1
,當我禁用它時,我的螢幕變黑,我必須重新啟動電腦。我注意到,當人們遇到這個問題時,他們會停用額外的監視器,但就我而言,我無法通過或可能我做得不正確。xrandr
LVDS1
xrandr
我使用的是 2011 年初的 MacBook Pro,解析度為 1680x1050。
關於如何禁用“幽靈”監視器並停止遊標閃爍的任何想法?
我會發布映像,但是因為我是 Ubuntu Stack Exchange 的這一部分的新手,所以我不能。