我的電腦設定為 Ubuntu 和 Windows 10 雙重啟動，幾個月來運作良好。最近，Ubuntu 在透過 Grub 或 BIOS 啟動覆蓋啟動時開始出現黑畫面（可能是 Windows 10 更新所致）。
我已經透過啟動修復刷新了 USB，並且可以透過 Live USB 成功啟動。但是，啟動修復需要在禁用 CSM/Legacy 模式的情況下啟動。當我在 BIOS 中停用 CSM 時，啟動時出現錯誤“VGA 卡與 UEFI 不相容，CSM 設定已更改以實現相容性”，這似乎會自動重新啟用 CSM，而沒有任何選項來停用它，從而阻止我使用引導修復。
我該怎麼辦？
編輯：我的顯示卡不支援 UEFI 模式。我不知道現在應該如何運行引導修復。
引導修復引導資訊摘要摘錄：
=> No boot loader is installed in the MBR of /dev/sda.
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/sdb.
=> Windows 7/8/10/11/2012 is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7/2008: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/Boot/bootx64.efi /efi/Boot/fbx64.efi
/efi/Boot/mmx64.efi /efi/ubuntu/grubx64.efi
/efi/ubuntu/mmx64.efi /efi/ubuntu/shimx64.efi
/efi/ubuntu/grub.cfg /efi/Microsoft/Boot/bootmgfw.efi
/efi/Microsoft/Boot/bootmgr.efi
sda2: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sda3: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 8 or 10
Boot files: /Windows/System32/winload.exe
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/10/11/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
sdc2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc3: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 22.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
sdd: ___________________________________________________________________________
File system: iso9660
Boot sector type: Unknown
Boot sector info:
Operating System:
Boot files: /boot/grub/grub.cfg
================================ 2 OS detected =================================
OS#1: Ubuntu 22.04.2 LTS on sdc4
OS#2: Windows 8 or 10 on sda3
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would purge (in order to unsign) and reinstall the grub-efi of
sdc4,
using the following options: sdc3/boot/efi
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
Blockers in case of suggested repair: __________________________________________
The current session is in BIOS-compatibility mode. Please disable BIOS-compatibility/CSM/Legacy mode in your UEFI firmware, and use this software from a live-CD (or live-USB) that is compatible with UEFI booting mode. For example, use a live-USB of Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd), after making sure your BIOS is set up to boot USB in EFI mode. 64bits detected. Please use this software in a 64bits session. (Please use Boot-Repair-Disk-64bit (www.sourceforge.net/p/boot-repair-cd) which contains a 64bits-compatible version of this software.) This will enable this feature.
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your UEFI firmware boot on the Ubuntu 22.04.2 LTS entry (sdc3/efi/****/grub****.efi (**** will be updated in the final message) file) !
If your computer reboots directly into Windows, try to change the boot order in your UEFI firmware.
If your UEFI firmware does not allow to change the boot order, change the default boot entry of the Windows bootloader.
For example you can boot into Windows, then type the following command in an admin command prompt:
bcdedit /set {bootmgr} path \EFI\****\grub****.efi (**** will be updated in the final message)
The boot of your PC is in BIOS-compatibility/CSM/Legacy mode. You may want to retry after changing it to UEFI mode.