透過路由欺騙 cisco vpn

Question

我幾個月來也遇到同樣的問題。我不得不斷開連接並訪問互聯網。連結起來，這樣我就可以存取公司資源......很痛苦。

我的臨時解決方案是在 Debian Linux 下安裝 Sonatype Nexus（依賴項代理）並連接虛擬專用網。通常你可以使用 apt-get/yum 等來安裝它。

當這個解決方案還不夠時，我在 Windows 電腦中安裝了 vpnc，並在頂部安裝了 vpnc-fe http://sourceforge.net/projects/vpncfe/（VPNc 前端）。

我的配置需要一個名為“Force-NTT”的完美安全設定。看這個線程。稍後您需要將以下腳本放入 postconnect.bat 中：

[複製以防線程中斷]

謝謝你，羅德凱爾肯！這是最終結果，無需手動修改即可打破分割路線：

@echo off
REM By: capt-tagon
REM 
REM Post-Script.bat to take VPNC's Route Table into Windows 7 land. Erases bad route table entries, 
REM extracts gateway, assigned IP, Netmask, and Cisco split route entries and resubmits them to 
REM Windows 7 so the routing all works. Condensed from other entries on the VPNC-FE forae and combined
REM with information gleaned from VPNC client for Linux to find all the passed parameters useful
REM to making this work. Additional by rodekerken noted below, thank you for helping finish it out.
REM
setlocal enabledelayedexpansion
echo.
echo Post-Script Begin
echo.
REM Gather Connection Data
REM 
REM Parameters passed have space at end, see "HELP SET" at Console Prompt for explanation of
REM substring extraction
REM Strip space from TUNDEV, INTERNAL_IP4_ADDRESS, VPNGATEWAY, CISCO_SPLIT_INC
REM This will be broken if VPNC-FE is fixed to not export parameters with the trailing space.
REM 
set MyTUNDev=%TUNDEV:~0,-1%
REM By: rodekerken
REM From the top of the router table printout, look for a line like
REM 14...00 ff 5d b0 44 aa ......TAP-Win32 Adapter V9 to find the if number.
REM A way to find out the interface number automatically and extractis this:
for /f "tokens=1 delims=." %%a in ('route print ^|find "TAP-Win32"') do set MyIF=%%a
set MyIP=%INTERNAL_IP4_ADDRESS:~0,-1%
set MyMask=%INTERNAL_IP4_NETMASK:~0,-1%
set MyVPN=%VPNGATEWAY:~0,-1%
REM Number of Routing Table Entries for Split Tunnel
set MyCiscoSplit=%CISCO_SPLIT_INC:~0,-1%
REM Date Time functions
set ANSIDate=%date:~10%%date:~4,2%%date:~7,2%
set StartTime=%time:~0,2%%time:~3,2%%time:~6,2%
REM Display Connection Data
echo Tunnel Device : [%MyTUNDev%]
echo Tunnel IntFace: [%MyIF%]
echo Tunnel IPAddr : [%MyIP%]
echo Tunnel NetMask: [%MyMask%]
echo Tunnel VPN-GW : [%MyVPN%]
echo .
echo Date Connected: [%ANSIDate%]
echo Time Connected: [%StartTime%]
echo .
REM Cisco Routes are 0 index, 6 Routes = 0-5
echo Cisco Split Routes: [%MyCiscoSplit%]
REM Display Bad Route Table
echo.
echo Bad Route Table
route print | find "%MyIP%"
echo.
REM Delete Bad Split Route entries and add back with proper Gateway.
REM Extract Cisco routing table information to feed to "ROUTE ADD"
REM Number of entries passed in Array Index CISCO_SPLIT_INC 
REM For x below, value is 0 to CISCO_SPLIT_INC - 1
REM Address is passed in CISCO_SPLIT_INC_x_ADDR
REM NetMask is passed in CISCO_SPLIT_INC_x_MASK
REM
REM By: rodekerken
REM A way to loop and enumerate and evaluate the routes is like this:
set /A MyCiscoSplit-=1
for /L %%i in (0,1,%MyCiscoSplit%) do (
                set SplitAddr=CISCO_SPLIT_INC_%%i_ADDR
                set SplitMask=CISCO_SPLIT_INC_%%i_MASK
        for /f %%a in ('echo !SplitAddr!') do set SplitAddrEval=!%%a!
        for /f %%a in ('echo !SplitMask!') do set SplitMaskEval=!%%a!
        echo Route%%i !SplitAddrEval! !SplitMaskEval!
        route delete !SplitAddrEval! >nul
        route add !SplitAddrEval! mask !SplitMaskEval! %MyVPN% metric 1 if %MyIF% >nul
)
REM Display Corrected Route Table
echo.
echo Corrected Route Table
route print | find "%MyVPN%"
echo.
echo Post-Script End
echo.

我還在“FOR”之後添加了這條路線：

route add 1111.120.120.0 mask 255.255.255.0 0.0.0.0 metric 1 if %MyIF%
route add 1111.185.19.0 mask 255.255.255.0 0.0.0.0 metric 1 if %MyIF%
route add 10.0.0.0 mask 255.0.0.0 0.0.0.0 metric 1 if %MyIF%

[請注意，前兩條路線的地址不正確/虛假。無論如何你都需要改變它]

為了讓我的腳本重複工作，您需要建立一個包含刪除路由的「disconnect.bat」：

route delete 1111.120.120.0
route delete 1111.185.19.0
route delete 10.0.0.0

只是我的 0.02 歐元

Answer 1