☰

使用 Cisco VPN 用戶端連接 VPN 時發生錯誤

tag-icon • tag-icon networking cisco-vpn-client
使用 Cisco VPN 用戶端連接 VPN 時發生錯誤

這是日誌

Cisco Systems VPN Client Version 5.0.07.0410 Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 6.2.9200  Config file directory: C:\Program Files\Cisco Systems\VPN Client\


 1. 09:53:33.418  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 2. 09:53:33.433  12/09/15  Sev=Warning/3   CVPND/0xE340000C The Client
    was unable to enable the Virtual Adapter because it could not open
    the device.

 3. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE300009B Failed to
    active IPSec SA: Unable to enable Virtual Adapter (NavigatorQM:936)

 4. 09:53:33.433  12/09/15  Sev=Warning/2   IKE/0xE30000A7 Unexpected SW
    error occurred while processing Quick Mode
    negotiator:(Navigator:2263)

任何幫助將非常感激。

答案1

  • 開啟註冊表編輯器ieregedit
  • 去HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva
  • 雙擊顯示名稱
  • 刪除@oem14.inf,%VPNVA64_Desc%DisplayName 前綴等字符

在此輸入影像描述

  • 再次嘗試連接

答案2

解決方案 1：經過一些研究和來自另一個社群的資訊後發現，Cisco VPN 在 DisplayName 字串的登錄項目中寫入了錯誤的值。

要解決此問題，我們應該將值變更為以下值：開啟登錄編輯程式 [從 Windows 執行類型 regedit] 並移至位置：HKLM\SYSTEM\CurrentControlSet\Services\CVirtA

For x86, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter" to "Cisco Systems VPN Adapter"
For x64, change the value data from "@oem8.inf,%CVirtA_Desc%;Cisco Systems VPN Adapter for 64-bit Windows" to "Cisco Systems VPN Adapter for 64-bit Windows"

現在，嘗試連接到 VPN，它應該可以正常工作。

相關內容