我最近重建了我的主 Hyper-V 伺服器以及其他兩台伺服器，由於我的整個網路仍在運行 Windows 7，因此我決定將 2012 R2 替換為 2008 R2。現在我的兩台輔助伺服器運作良好。
問題就出在主要的一處。 Hyper-V 不會初始化虛擬機器。為了確保我沒有弄亂 BIOS，我卸載了 Hyper-V 並安裝了 VMWare Workstation。 VM 沒有問題。我真的不想使用 VMWare，因為我所有的虛擬機器都已經是 Hyper-V 格式，而且說實話，我更喜歡 Hyper-V，而不是 VMware。
作為參考，該機器是全新安裝的，並且兩台虛擬機器都是全新的。我還驗證了我的安裝媒體並確認它是好的。
確切的錯誤 -
[Window Title]
Hyper-V Manager
[Main Instruction]
An error occurred while attempting to start the selected virtual machine(s).
[Content]
'New Virtual Machine' could not initialize.
The virtual machine could not be started because the hypervisor is not running.
[Expanded Information]
'New Virtual Machine' could not initialize. (Virtual machine ID 3C2AAECF-136C-4BB8-A2F8-8690E97F5ED0)
The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem:
1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization.
2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.)
3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically.
[^] Hide details [Close]
運行 Hyper-V 的系統：
運行VMWare的系統：
答案1
經過一番折騰後，我不小心觸發了 chkdsk，它顯示我的硬碟上有很多壞扇區。我出去買了一個新的，它啟動得很好。
感謝所有試圖提供幫助的人。