我使用的是 Antergos linux,4.9.73-1-lts x86_64。我購買了 USB Wi-Fi 轉接器 tp-link tl-wn722n,但無法在我的筆記型電腦上進行設定。我裡面還有MT7630e wi-fi 卡。第二張卡片進入監聽模式的方法一樣嗎?我應該發布什麼資訊/日誌?
[root@OrpheusPlanet starorpheus]# iwconfig
wlp3s0f0 IEEE 802.11 ESSID:"Mamus"
Mode:Managed Frequency:2.427 GHz Access Point: C0:25:E9:B1:A1:92
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=56 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:13 Invalid misc:74 Missed beacon:0
wlp0s20u1 unassociated Nickname:"<WIFI@REALTEK>" ; this one is external
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
但
[root@OrpheusPlanet starorpheus]# iw dev
phy#0
Interface wlp3s0f0
ifindex 3
wdev 0x1
addr ec:0e:c4:29:80:d9
type managed
channel 4 (2427 MHz), width: 40 MHz, center1: 2437 MHz
txpower 20.00 dBm
和
[root@OrpheusPlanet starorpheus]# iw wlp0s20u1 set monitor control
command failed: No such device (-19)
所以,一切看起來都像我有該卡已安裝 Wi-Fi 驅動程式(我可以連接到網路),但它不支援監控模式。我對嗎?我該如何檢查?
答案1
檢查您的裝置的版本。 TLWN722N V2 本機驅動程式不支援監控模式。除非你安裝了 Mfruba 提供的自訂驅動程式關聯