☰

“無法連接到此網路”故障排除

tag-icon • tag-icon networking wireless-networking wireless-router connection
“無法連接到此網路”故障排除

經過對超級用戶和其他在線上找到的答案的大量研究和測試後，我無法解決：

  • 我連接到路由器的所有設備都正常連接/工作，除了一台電腦。
  • 這些裝置包括 3 部 Android 手機、1 部 MacBook、1 部筆記型電腦和兩台 Android 平板電腦。一切工作都沒有任何問題。
  • 無法連線的電腦甚至不會接觸路由器，這真的讓我很生氣，我無法解決這個問題。
  • 我嘗試過winsock重置，驅動程式更新，嘗試過wifi適配器，但沒有成功。

日誌輸出

[Microsoft-Windows-WLAN-AutoConfig]Connection started 2  
[Microsoft-Windows-WLAN-AutoConfig]Begin Connect API   
[Microsoft-Windows-WLAN-AutoConfig]FSM Current state Disconnected, event Cmd_Connect     
[Microsoft-Windows-WLAN-AutoConfig]Calling MSMSecStopSecurity  
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) Received StopSecurity  
[Microsoft-Windows-NWiFi]Reset PHY New MAC address 0x*MyMAC* SetDefaultMIB=true   
[Microsoft-Windows-WLAN-AutoConfig]FSM Transition from State: Disconnected to State: Reset  
[Microsoft-Windows-WiFiNetworkManager]WlanMgr - Recieved wlan notif: wlan_notification_acm_profile_change   
[Microsoft-Windows-WiFiNetworkManager]NotifMgr - Publishing new WNF connection state, type = WIFI_NOTIF_TYPE_AVAILABLE , state = 0x0, ntStatus = 0x0.  
[Microsoft-Windows-WiFiNetworkManager]NotifMgr - Publishing new WNF connection state, type = WIFI_NOTIF_TYPE_CONNECTION , state = 0x1, ntStatus = 0x0.   
[Microsoft-Windows-WiFiNetworkManager]NotifMgr - Publishing new WNF connection state, type = WIFI_NOTIF_TYPE_PREFERRED , state = 0x0, ntStatus = 0x0.  
[Microsoft-Windows-WLAN-AutoConfig]Scan completion Status 0  
[Microsoft-Windows-WiFiNetworkManager]WlanMgr - Recieved wlan notif: wlan_notification_acm_scan_complete  
[Microsoft-Windows-WiFiNetworkManager]WlanMgr - Recieved wlan notif: wlan_notification_acm_scan_list_refresh  
[Microsoft-Windows-NWiFi]OID_DOT11_RESET_REQUEST Complete 0x0 ResetConfirmStatus=0x0  
[Microsoft-Windows-WLAN-AutoConfig]FSM Current state Reset , event Reset_Success  
[Microsoft-Windows-WLAN-AutoConfig]SSID = xxx BSSIDCount = 0   
[Microsoft-Windows-NWiFi]Desired SSID List 1 entries   
[Microsoft-Windows-NWiFi]Set DesiredBSSType: infrastructure  
[Microsoft-Windows-NWiFi]Set HiddenNetworkEnabled (false): 0x0   
[Microsoft-Windows-WLAN-AutoConfig]FSM Transition from State: Reset to State: Ihv_Configuring  
[Microsoft-Windows-WLAN-AutoConfig]FSM Current state Ihv_Configuring , event IHV_Pre_Security_Success  
[Microsoft-Windows-WLAN-AutoConfig]Calling MSMSecPerformPreAssociateSecurity   
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) MSM Connect notification, Network "xxx"   
[Microsoft-Windows-WLAN-AutoConfig]WLAN Security Settings: BSS Type  infrastructure , Authentication Open , Encryption WEP , OneX Enabled No , Eap Information - Type 0, Vendor ID 0, Vendor Type 0, Author ID 0  
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) IntfSecState Transition INITIALIZED -->PROCESSING_PREASSOCIATE  
[Microsoft-Windows-WLAN-AutoConfig]FSM Transition from State: Ihv_Configuring  to State: Configuring  
[Microsoft-Windows-NWiFi]Enabled AuthList 1 entries  
[Microsoft-Windows-NWiFi]Set ExcludeUnencrypted (true): 0x0   
[Microsoft-Windows-WLAN-AutoConfig]Default Key: Idx 0, Algo WEP , Direction= Both , Len x  
[Microsoft-Windows-WLAN-AutoConfig]Default Key ID set to Index 0  
[Microsoft-Windows-NWiFi]IOCTL function=0xD4 Status=0xC0000010 Length=688 bytes 
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) IntfSecState Transition PROCESSING_PREASSOCIATE -->PREASSOCIATE_DONE
[Microsoft-Windows-WLAN-AutoConfig]Adapter(5) Connect Completion, Reason 0, Error 0  
[Microsoft-Windows-WLAN-AutoConfig]Security PreConnect Completion, security reason: 0x0, error 0x0   
[Microsoft-Windows-WLAN-AutoConfig]FSM Current state Configuring , event Pre_Security_Success  
[Microsoft-Windows-WLAN-AutoConfig]Wireless network association started. Network Adapter: Qualcomm Atheros AR9485WB-EG Wireless Network Adapter  Interface GUID: {0ddb0198-3602-4de5-a5f5-e0826970c91e}  Local MAC Address: xx:xx:xx:xx:xx:xx  Network SSID: xxx  BSS Type: Infrastructure  Authentication: Open  Encryption: WEP  802.1X Enabled: No    
[Microsoft-Windows-NWiFi]Security endpoint type = Standard Security  
[Microsoft-Windows-NWiFi]IHV Serialization Enabled: false   
[Microsoft-Windows-WiFiNetworkManager]AutoConnect - ConfigureAutoConnectNetworksInternal: Confirmation Timer - TimeLeft = [0] msecs    
[Microsoft-Windows-NWiFi]IOCTL_DOT11_CONNECT   
[Microsoft-Windows-NWiFi]OID_DOT11_CONNECT_REQUEST completes 0x0   
[Microsoft-Windows-WLAN-AutoConfig]FSM Transition from State: Configuring  to State: Associating  
[Microsoft-Windows-WiFiNetworkManager]NotifMgr - Publishing new WNF connection state, type = WIFI_NOTIF_TYPE_AVAILABLE , state = 0x0, ntStatus = 0x0.   
[Microsoft-Windows-NWiFi]Connection Started   
[Microsoft-Windows-NWiFi]Connection Completion Status=0xC000023C   
[Microsoft-Windows-WLAN-AutoConfig]FSM Current state Associating , event **Upcall_Association_Failure**  
[Microsoft-Windows-WLAN-AutoConfig]Calling MSMSecStopSecurity   
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) Received StopSecurity   
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) IntfSecState Transition PREASSOCIATE_DONE -->STOPPING_SECURITY  
[Microsoft-Windows-WLAN-AutoConfig]Received Security Packet: CONNECT_COMPLETION   
[Microsoft-Windows-WLAN-AutoConfig]Received CONNECT COMPLETION, status 0xC000023C, assocStatus 0x2   
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) IntfSecState Transition STOPPING_SECURITY -->INITIALIZED    
[Microsoft-Windows-WLAN-AutoConfig]Adapter({0ddb0198-3602-4de5-a5f5-e0826970c91e}) MSM Disconnect notification   
[Microsoft-Windows-WLAN-AutoConfig]Connect completion reason 0x38002, session 0x1, **adhoc formed false**   
[Microsoft-Windows-WLAN-AutoConfig]FSM Transition from State: Associating  to State: Disconnected  
[Microsoft-Windows-WLAN-AutoConfig]Connection complete on interface Qualcomm Atheros AR9485WB-EG Wireless Network Adapter, session = 0x1, status = 0x38002, **ad hoc network formed = false**   
[Microsoft-Windows-WLAN-AutoConfig]**Connect Diagnostic Information  Interface** GUID: {0ddb0198-3602-4de5-a5f5-e0826970c91e}  Network Adapter: Qualcomm Atheros AR9485WB-EG Wireless Network Adapter Connection Mode: profile   SSID: xxx  BSS Type: infrastructure  Authentication: Open   Encryption: WEP   802.1X Enabled: 0  IHV Bitmap: 5  Hidden: false  Peer MAC: 00:00:00:00:00:00  WLAN Status  Code: 229378  Dot11 Status Code: 0x2  Assoc Time: 4294967295  Assoc Restart Count: 0  Auth Time: 0  Auth Restart Count: 0  Device ID: PCI\VEN_168C&DEV_0032&SUBSYS_2C971A3B&REV_01\4&AE113B&0&0020  Device Manufacturer: Qualcomm Atheros Communications Inc.  Driver Service: athr  Driver Version: 3.0.2.201  Driver Date: 2-27-2016  RSSI: -68  Signal Quality: 62%  Channel: 0  Interfering AP Count: 0  Total Visible AP Count: 9  Max AP Phy Type: any  Max AP Channel Width: 0  AP Description:   AP Manufacturer:   AP Model Name:   AP Model Number:  Detailed Status On Roam: 0xFFFFFFFFRx Rate:0  Tx Rate: 0  EAP Type: -1 802.1x Auth Mode: None  HotSpot 2.0: false  Profile Type -1  System MAC Randomization: 1  Profile MAC Randomization: 0   
[Microsoft-Windows-WLAN-AutoConfig]Connection failed. Interface = Qualcomm Atheros AR9485WB-EG Wireless Network Adapter, Reason code = 0x38002.    
[Microsoft-Windows-WLAN-AutoConfig]Media notification received. Interface = Qualcomm Atheros AR9485WB-EG Wireless Network Adapter, Connected = false.  
[Microsoft-Windows-WLAN-AutoConfig]WLAN AutoConfig service failed to connect to a wireless network. Network Adapter: Qualcomm Atheros AR9485WB-EG Wireless Network Adapter Interface GUID: {0ddb0198-3602-4de5-a5f5-e0826970c91e}  Connection Mode: Manual connection with a profile  Profile Name: xxx  SSID: xxx BSS Type: Infrastructure  **Failure Reason:The specific network is not available.  RSSI: 255**

問題

  • 因此，一切似乎都很順利，但即使訊號超強（RSSI：255），系統似乎也看不到路由器，並拒絕繼續連線。

什麼有效

  • 所有其他設備都運作正常，沒有理由懷疑路由器有任何問題。同時，筆記型電腦連接到任何其他網路也沒有任何問題。

這兩個人之間似乎有一些特別的仇恨。該問題與系統無關，因為我正在使用 Win 7 和 Win 10 運行雙啟動，並且情況是相同的。

答案1

在查看您的日誌時，您的 RSSI 似乎是 -68（這很好）。您似乎也使用 WEP 作為安全機制。一些較新的無線驅動程式不再支援 Wi-Fi 聯盟規定的 WEP。請將您的安全性變更為 WPA2-PSK，並查看您的筆記型電腦是否關聯到存取點（或用您的話來說，路由器）。讓我知道事情的後續。

答案2

您是否遇到藍屏，即使是偶爾？我也遇到了同樣的問題，路由器無法連接，偶爾藍屏。有一天，我的硬碟故障。將硬碟從系統中取出消除了藍屏，我的路由器已連接，電腦的啟動和關閉速度更快。只是一個想法。

您可能想要執行 HDD 診斷。 Western Digital 免費提供基本的智慧型驅動器資訊測試儀。鏈接在這裡。您需要按一下適用於 Windows 的軟體，然後按一下適用於 Windows 的 Data Lifeguard Diagnostic。我知道有更高級的程式可以做到這一點，但我不知道它們在哪裡。希望這可以幫助。

https://support.wdc.com/downloads.aspx?lang=en#firmware

答案3

經過兩天的搜索和查看日誌後，我放棄了並致電技術支援。他剛剛在 Windows WiFi 設定中啟用了隨機硬體位址，並且它起作用了！

相關內容