☰

任何控制器均未偵測到 HDD 裝置 WD Black 4TB

tag-icon • tag-icon linux hard-drive bios
任何控制器均未偵測到 HDD 裝置 WD Black 4TB

我購買了新的 WD Black 4TB HDD，插入 HP ProLiant DL380 伺服器後未偵測到它。我只是在不同的電腦和控制器上嘗試過，但我已經將硬碟發送給同樣的東西了一次。

這是我的 Linux Kali 系統的 dmesg 輸出日誌，直接輸入後：

[Tue Aug 13 06:56:41 2019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Tue Aug 13 06:56:41 2019] ata1.00: failed to read native max address (err_mask=0x100)
[Tue Aug 13 06:56:41 2019] ata1.00: HPA support seems broken, skipping HPA handling
[Tue Aug 13 06:56:47 2019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:47 2019] ata1.00: READ LOG DMA EXT failed, trying PIO
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: ATA-9: WDC WD4005FZBX-00K5WB0, 01.01A01, max UDMA/133
[Tue Aug 13 06:56:47 2019] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32)
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:47 2019] ata1.00: configured for UDMA/133 (device error ignored)
[Tue Aug 13 06:56:47 2019] scsi 0:0:0:0: Direct-Access     ATA      WDC WD4005FZBX-0 1A01 PQ: 0 ANSI: 5
[Tue Aug 13 06:56:47 2019] sd 0:0:0:0: Attached scsi generic sg1 type 0
[Tue Aug 13 06:56:47 2019] sd 0:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[Tue Aug 13 06:56:47 2019] sd 0:0:0:0: [sdb] Write Protect is off
[Tue Aug 13 06:56:47 2019] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[Tue Aug 13 06:56:47 2019] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[Tue Aug 13 06:56:47 2019] ata1: failed to read log page 10h (errno=-5)
[Tue Aug 13 06:56:47 2019] ata1.00: exception Emask 0x1 SAct 0x1000000 SErr 0x0 action 0x0
[Tue Aug 13 06:56:47 2019] ata1.00: irq_stat 0x40000001
[Tue Aug 13 06:56:47 2019] ata1.00: failed command: READ FPDMA QUEUED
[Tue Aug 13 06:56:47 2019] ata1.00: cmd 60/08:c0:00:00:00/00:00:00:00:00/40 tag 24 ncq dma 4096 in
                                    res 41/04:08:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[Tue Aug 13 06:56:47 2019] ata1.00: status: { DRDY ERR }
[Tue Aug 13 06:56:47 2019] ata1.00: error: { ABRT }
[Tue Aug 13 06:56:47 2019] ata1.00: both IDENTIFYs aborted, assuming NODEV
[Tue Aug 13 06:56:47 2019] ata1.00: revalidation failed (errno=-2)
[Tue Aug 13 06:56:47 2019] ata1: hard resetting link
[Tue Aug 13 06:56:47 2019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:47 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:47 2019] ata1.00: configured for UDMA/133 (device error ignored)
[Tue Aug 13 06:56:47 2019] ata1: EH complete
[Tue Aug 13 06:56:47 2019] ata1: failed to read log page 10h (errno=-5)
[Tue Aug 13 06:56:47 2019] ata1.00: NCQ disabled due to excessive errors
[Tue Aug 13 06:56:47 2019] ata1.00: exception Emask 0x1 SAct 0x8 SErr 0x0 action 0x0
[Tue Aug 13 06:56:47 2019] ata1.00: irq_stat 0x40000001
[Tue Aug 13 06:56:47 2019] ata1.00: failed command: READ FPDMA QUEUED
[Tue Aug 13 06:56:47 2019] ata1.00: cmd 60/08:18:00:00:00/00:00:00:00:00/40 tag 3 ncq dma 4096 in
                                    res 41/04:08:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[Tue Aug 13 06:56:47 2019] ata1.00: status: { DRDY ERR }
[Tue Aug 13 06:56:47 2019] ata1.00: error: { ABRT }
[Tue Aug 13 06:56:47 2019] ata1.00: both IDENTIFYs aborted, assuming NODEV
[Tue Aug 13 06:56:47 2019] ata1.00: revalidation failed (errno=-2)
[Tue Aug 13 06:56:47 2019] ata1: hard resetting link
[Tue Aug 13 06:56:48 2019] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Tue Aug 13 06:56:48 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:48 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:48 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:48 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:48 2019] ata1.00: failed to enable AA (error_mask=0x1)
[Tue Aug 13 06:56:48 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:48 2019] ata1.00: NCQ Send/Recv Log not supported
[Tue Aug 13 06:56:48 2019] ata1.00: failed to enable Sense Data Reporting, Emask 0x1
[Tue Aug 13 06:56:48 2019] ata1.00: configured for UDMA/133 (device error ignored)
[Tue Aug 13 06:56:48 2019] ata1: EH complete
[Tue Aug 13 06:56:48 2019] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[Tue Aug 13 06:56:48 2019] ata1.00: irq_stat 0x40000001
[Tue Aug 13 06:56:48 2019] ata1.00: failed command: READ DMA
[Tue Aug 13 06:56:48 2019] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 18 dma 4096 in
                                    res 51/04:08:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)

也許有人可以幫我解決這個問題。謝謝。

答案1

那個盤壞了。它確實對第一個探測命令做出反應，但一旦 Linux 系統嘗試獲取其他資訊（例如驅動器功能和大小），它就不會響應。
您的其他系統也遇到了同樣的問題。
實際上該磁碟完全無法使用。
由於它是新的，因此應該仍在保固期內：要么由您購買它的商店更換它，要么直接將其發送給 Western Digital 以獲取 RMA（WD RAM 程式可以在其網站上找到）。

答案2

對於未來的谷歌用戶：在不小心將磁碟掉到地上後，我在日誌中得到了完全相同的錯誤訊息。當您收到此錯誤時，您的磁碟很可能已損壞，就像其他答案所暗示的那樣。在我發生事故之前，磁碟工作得很好。

相關內容