我的伺服器開始無緣無故地隨機重新啟動。
我已經嘗試定位這個問題很久了，起初我以為是虛擬化/proxmox或某些原因導致了重啟。
但現在我開始懷疑我的硬碟儲存出現故障。大家覺得怎麼樣，兩個月前的驅動器已經死了嗎？
root@proxmox ~ # smartctl -a /dev/sda
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.0.21-1-pve] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Enterprise Capacity 3.5 HDD
Device Model: ST4000NM0024-1HT178
Serial Number: Z4F0S45P
LU WWN Device Id: 5 000c50 091cb67e9
Firmware Version: SN06
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Feb 7 18:16:25 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 414) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x50bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 159956709
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 38
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 096 060 045 Pre-fail Always - 3800350406
9 Power_On_Hours 0x0032 068 068 000 Old_age Always - 28583
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 37
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 048 040 Old_age Always - 30 (Min/Max 29/30)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1155
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3594
194 Temperature_Celsius 0x0022 030 052 000 Old_age Always - 30 (0 23 0 0 0)
195 Hardware_ECC_Recovered 0x001a 030 003 000 Old_age Always - 159956709
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 23992 -
# 2 Short offline Completed without error 00% 23991 -
# 3 Extended offline Completed without error 00% 23986 -
# 4 Short offline Completed without error 00% 23975 -
# 5 Extended offline Completed without error 00% 23968 -
# 6 Extended offline Completed without error 00% 23950 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
讓我擔心的是：
1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 159956709
真的是這樣嗎？我是否正確地看到有 159956709 錯誤？
答案1
即使在 GUI smartmontools（我認為它使用 smartctl）中，這些條目也很難理解。您的開機時間為 28,583 小時，上次擴展測試時間為 23,986 小時，因此如果您擔心，可以再次執行測試。如果這些測試通過並且您的 SMART 錯誤日誌為空，那麼我說您的驅動器沒有問題，問題出在其他地方。如果您真的很偏執，您可以啟動製造商/OEM 驅動測試工具（連結到 SeaTools）使用他們的測試；不過我相信 smartctl，因為 OEM 有動力（請叫我偏執狂）告訴你驅動器沒問題，但實際上卻沒問題（因為他們可能必須保證）