☰

如何使Docker容器和主機處於同一網路層級？

tag-icon • tag-icon networking docker docker-for-windows
如何使Docker容器和主機處於同一網路層級？

我想讓docker容器的IP可以從主機訪問，就像VirtualBox具有的“僅主機網路”一樣。

目前我可以從 docker 容器 ping windows 主機，但反之則不行。

這是我的 Docker 容器配置

/ # ifconfig
eth0      Link encap:Ethernet  HWaddr 02:42:AC:11:00:02
          inet addr:172.17.0.2  Bcast:172.17.255.255  Mask:255.255.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2091 errors:0 dropped:0 overruns:0 frame:0
          TX packets:22137 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:176077 (171.9 KiB)  TX bytes:3396902 (3.2 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:444 (444.0 B)  TX bytes:444 (444.0 B)

這是Windows主機

Ethernet adapter vEthernet (Default Switch):

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::9197:4f9c:c12b:a2d4%29
   IPv4 Address. . . . . . . . . . . : 172.18.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.240.0
   Default Gateway . . . . . . . . . :

這是我嘗試從容器 ping Windows 主機時的結果

/ # ping  172.18.0.1
PING 172.18.0.1 (172.18.0.1): 56 data bytes
64 bytes from 172.18.0.1: seq=0 ttl=37 time=1.369 ms
64 bytes from 172.18.0.1: seq=1 ttl=37 time=1.580 ms
64 bytes from 172.18.0.1: seq=2 ttl=37 time=1.524 ms
64 bytes from 172.18.0.1: seq=3 ttl=37 time=1.416 ms
64 bytes from 172.18.0.1: seq=4 ttl=37 time=1.573 ms
64 bytes from 172.18.0.1: seq=5 ttl=37 time=1.428 ms

相關內容