☰

USB wifi 轉接器問題

tag-icon • tag-icon wifi drivers usb airmon-ng airodump-ng
USB wifi 轉接器問題

我有一個 USB wifi 適配器（EdimaxEW-7612UAn V2）其驅動程式安裝在我的parrot 系統上，而我的電腦的PCI 與Parrot 不相容。 ，USB wifi 適配器運作良好，並且電腦的PCI當然，這是行不通的。當將我的 pci 置於監視器並將我的 USB wifi 適配器置於託管模式時，網路管理器將它們從 wifi 選單中刪除，儘管 USB 適配器未處於監視器模式。

換句話說，如果主 PCI 不相容或不可識別，Parrot 將無法識別這兩個適配器。那麼，我該怎麼做才能強制 parrot 只使用 USB wifi 轉接器？

lsusb -v 結果：

Bus 002 Device 003: ID 7392:7822 Edimax Technology Co., Ltd 802.11n WLAN Adapter
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x7392 Edimax Technology Co., Ltd
  idProduct          0x7822 
  bcdDevice            2.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x002e
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               1

網路管理器截圖

網路管理器截圖

rf-kill 的結果：

0: hp-wifi: Wireless LAN
    Soft blocked: no
    Hard blocked: yes
1: hp-bluetooth: Bluetooth
    Soft blocked: no
    Hard blocked: yes
2: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
3: phy1: Wireless LAN
    Soft blocked: no
    Hard blocked: yes

ifconfig 的結果：

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 34:64:a9:73:43:20  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 8  bytes 396 (396.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 396 (396.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

答案1

我找到了答案。這裡，我發現我的 pci 使用“rt2800pci”。

modprobe -r rt2800pci

它運作良好，USB wifi 適配器開始工作，但此解決方案僅適用於一次會話，一旦電腦重新啟動，您將不得不再次卸載該模組，如果您希望始終卸載該模組，可以將該模組列入黑名單。

相關內容