USB裝置重新啟動後需重新插拔

USB裝置重新啟動後需重新插拔

重新啟動電腦後,我的兩個 USB 裝置無法運作:滑鼠和外部 WiFi 適配器。

其他 USB 裝置(例如印表機、鍵盤或外部磁碟)都可以正常運作。然而,滑鼠和 Wifi 總是需要斷開/重新連接 - 然後它們才能按預期工作。當我完全拔掉電源線然後打開機器時,一切都正常工作。正常關機是不行的。

我環顧四周,發現了不同的建議,例如重置 USB 端口,為此我使用了這個烏斯布雷塞特utility ,它適用於我的滑鼠,儘管需要一些時間(10 秒),而拔出/插入滑鼠線會立即起作用。

切換 USB 連接埠沒有任何區別,我嘗試了不同的 USB 端口,甚至是舊的 USB 2.0 連接埠。

但它不適用於我的 WiFi 適配器。我還發現執行時它甚至沒有列出LSSB。有沒有適用於這兩種設備的解決方案?

系統資訊:

dmesg 輸出的 USB 部分如下所示:

[    8.543260] usb 1-6: Device not responding to setup address.
[    8.621357] usbcore: registered new interface driver usbhid
[    8.621359] usbhid: USB HID core driver
[    8.625461] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.0/0003:045E:07F8.0001/input/input15
[    8.680636] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:38:00.3-4/input0
[    8.680937] input: Microsoft Wired Keyboard 600 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.1/0003:045E:07F8.0002/input/input16
[    8.740196] input: Microsoft Wired Keyboard 600 System Control as /devices/pci0000:00/0000:00:08.1/0000:38:00.3/usb3/3-4/3-4:1.1/0003:045E:07F8.0002/input/input17
[    8.740301] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:38:00.3-4/input1
[    8.950935] fuse: init (API version 7.31)
[    8.950991] *** VALIDATE fuse ***
[    8.950994] *** VALIDATE fuse ***
[   10.563896] kauditd_printk_skb: 24 callbacks suppressed
[   10.563897] audit: type=1130 audit(1586452184.476:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.163360] snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 2
[   12.340958] audit: type=1130 audit(1586452186.252:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.344467] audit: type=1130 audit(1586452186.256:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=expressvpn comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.530392] audit: type=1325 audit(1586452186.439:48): table=filter family=2 entries=0
[   12.562109] audit: type=1325 audit(1586452186.472:49): table=filter family=10 entries=0
[   12.774046] aufs 5.5-20200302
[   13.135884] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   13.139005] Bridge firewalling registered
[   13.166492] audit: type=1325 audit(1586452187.076:50): table=nat family=2 entries=0
[   13.201972] audit: type=1325 audit(1586452187.112:51): table=nat family=2 entries=5
[   13.204115] audit: type=1325 audit(1586452187.116:52): table=filter family=2 entries=4
[   13.206234] audit: type=1325 audit(1586452187.116:53): table=filter family=2 entries=6
[   13.208873] audit: type=1325 audit(1586452187.119:54): table=filter family=2 entries=8
[   13.238387] Initializing XFRM netlink socket
[   13.546480] usb 1-6: Device not responding to setup address.
[   13.676962] ahci 0000:15:00.1: port does not support device sleep
[   13.756687] usb 1-6: device not accepting address 3, error -71
[   14.153438] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[   15.977783] kauditd_printk_skb: 37 callbacks suppressed
[   15.977785] audit: type=1131 audit(1586452189.889:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.949402] usb 1-6: Device not responding to setup address.
[   23.952635] usb 1-6: Device not responding to setup address.
[   24.160012] usb 1-6: device not accepting address 4, error -71
[   24.160068] usb usb1-port6: attempt power cycle
[   24.803571] usb 1-6: new high-speed USB device number 5 using xhci_hcd
[   30.016938] usb 1-6: device descriptor read/64, error -110
[   36.163628] audit: type=1131 audit(1586452210.076:93): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   41.350165] usb 1-5: USB disconnect, device number 2
[   41.610038] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[   42.040881] usb 1-5: New USB device found, idVendor=04d9, idProduct=a070, bcdDevice= 1.04
[   42.040885] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   42.040887] usb 1-5: Product: USB Gaming Mouse
[   42.040889] usb 1-5: Manufacturer: Sun Sonny
[   42.956688] usb 1-6: new high-speed USB device number 7 using xhci_hcd
[   43.014384] usb 1-6: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08
[   43.014389] usb 1-6: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[   43.014391] usb 1-6: Product: UB91C
[   43.014393] usb 1-6: Manufacturer: ATHEROS
[   43.014395] usb 1-6: SerialNumber: 12345
[   43.038423] usb 1-6: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[   43.620567] input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-5/1-5:1.0/0003:04D9:A070.0006/input/input18
[   43.677091] holtek_mouse 0003:04D9:A070.0006: input,hidraw2: USB HID v1.10 Keyboard [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input0
[   43.677572] input: Sun Sonny USB Gaming Mouse as /devices/pci0000:00/0000:00:01.2/0000:15:00.0/usb1/1-5/1-5:1.1/0003:04D9:A070.0007/input/input19
[   43.733544] holtek_mouse 0003:04D9:A070.0007: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input1
[   43.733755] holtek_mouse 0003:04D9:A070.0008: hiddev1,hidraw4: USB HID v1.10 Device [Sun Sonny USB Gaming Mouse] on usb-0000:15:00.0-5/input2
[   44.118540] usb 1-6: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   44.367951] ath9k_htc 1-6:1.0: ath9k_htc: HTC initialized with 33 credits
[   44.382279] mousedev: PS/2 mouse device common for all mice
[   44.594532] ath9k_htc 1-6:1.0: ath9k_htc: FW Version: 1.4
[   44.594535] ath9k_htc 1-6:1.0: FW RMW support: On
[   44.594537] ath: EEPROM regdomain: 0x833a
[   44.594538] ath: EEPROM indicates we should expect a country code
[   44.594539] ath: doing EEPROM country->regdmn map search
[   44.594541] ath: country maps to regdmn code: 0x37
[   44.594542] ath: Country alpha2 being used: GB
[   44.594543] ath: Regpair used: 0x37
[   44.598475] ieee80211 phy0: Atheros AR9271 Rev:1
[   44.611638] ath9k_htc 1-6:1.0 wlp21s0f0u6: renamed from wlan0
[   44.613348] audit: type=1130 audit(1586452218.522:94): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

答案1

在核心 5.5.1 中引入了一個特定的 Wi-Fi 錯誤。

它已被驗證在內核 5.6.2 中已修復,但絕對是不是已在 5.5.14 中修復。

據推測該修復將進入 5.5.15,但我還沒有看到對此的確認。

這裡是布格特拉克

相關內容