☰

Centos8 不回應 IGMP v2 成員資格查詢

tag-icon • tag-icon centos rhel multicast
Centos8 不回應 IGMP v2 成員資格查詢

在解決一般問題時，為什麼Centos 8盒子發送JOIN後收不到組播數據，使用wireshark進行分析也顯示Centos盒子沒有回應IGMP v2成員資格查詢。

在這種情況下，多播位址 225.1.1.3 已加入，可以透過以下方式確認netstat -g：

# netstat -g
IPv6/IPv4 Group Memberships
Interface       RefCnt Group
--------------- ------ ---------------------
lo              1      224.0.0.1
eth0            1      224.0.0.1
eth1            1      225.1.1.3

與中的信息匹配/proc/net/igmp

# cat /proc/net/igmp
Idx     Device    : Count Querier       Group    Users Timer    Reporter
3       eth1      :     3      V3
                                030101E1     1 0:00000000               0
                                010101EF     1 0:00000000               0
                                010000E0     1 0:00000000               0

但很明顯，它沒有發送對 v2 成員資格查詢訊息的回應：

 1881 2544.437502942 192.168.105.253 → 225.1.1.3    IGMPv2 60 Membership Query, specific for group 225.1.1.3
 1883 2545.439116776 192.168.105.253 → 225.1.1.3    IGMPv2 60 Membership Query, specific for group 225.1.1.3
 1890 2555.526695862 192.168.105.253 → 224.0.0.1    IGMPv2 60 Membership Query, general
 1936 2615.525812650 192.168.105.253 → 224.0.0.1    IGMPv2 60 Membership Query, general
 1977 2675.524651646 192.168.105.253 → 224.0.0.1    IGMPv2 60 Membership Query, general
 1981 2680.487871978 192.168.105.253 → 225.1.1.3    IGMPv2 60 Membership Query, specific for group 225.1.1.3
 1983 2681.488403894 192.168.105.253 → 225.1.1.3    IGMPv2 60 Membership Query, specific for group 225.1.1.3
 1999 2702.808993240 192.168.117.21 → 224.0.0.22   IGMPv3 54 Membership Report / Leave group 225.1.1.3
 2000 2702.826998740 192.168.117.21 → 224.0.0.22   IGMPv3 54 Membership Report / Leave group 225.1.1.3
 2002 2704.929915370 192.168.117.21 → 224.0.0.22   IGMPv3 54 Membership Report / Join group 225.1.1.3 for any sources
 2003 2705.331977636 192.168.117.21 → 224.0.0.22   IGMPv3 54 Membership Report / Join group 225.1.1.3 for any sources
 2023 2735.523170767 192.168.105.253 → 224.0.0.1    IGMPv2 60 Membership Query, general
 2063 2795.522407972 192.168.105.253 → 224.0.0.1    IGMPv2 60 Membership Query, general

許多帖子提到禁用防火牆和/或設定路由。但防火牆已關閉，路由已新增。問題仍然存在。

如何設定 Centos8 來回應成員資格查詢？

# systemctl status firewalld
● firewalld.service
   Loaded: masked (Reason: Unit firewalld.service is masked.)
   Active: inactive (dead)

# ip route
10.1.0.0/16 dev eth2 proto kernel scope link src 10.1.2.21
30.0.0.0/16 dev eth0 proto kernel scope link src 30.0.0.21
169.254.0.0/16 dev eth0 scope link metric 1002
169.254.0.0/16 dev eth1 scope link metric 1003
169.254.0.0/16 dev eth2 scope link metric 1004
169.254.0.0/16 dev eth3 scope link metric 1005 linkdown
192.168.2.0/24 dev eth3 proto kernel scope link src 192.168.2.21 linkdown
192.168.117.0/24 dev eth1 proto kernel scope link src 192.168.117.21
224.0.0.0/4 dev eth1 scope link
234.0.0.0/8 dev eth1 scope link
235.0.0.0/8 dev eth1 scope link
239.0.0.0/8 dev eth1 scope link

答案1

儘管我們已net.ipv4.conf.default.rp_filter設定為零，但事實證明完全停用返迴路徑驗證，我們需要將所有設定設為rp_filter零（包括明確列出介面）。

我們在下面放置一個文件，/etc/sysctl.d如下所示：

# Set IGMP Version for eth1
# Set to '2' or '3' depending on what is enabled in the switch
net.ipv4.conf.eth1.force_igmp_version = 2

# Disable source route verification
# In addition to 90-torque.conf, also explicitly set eth1 to ignore
# return path validation
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.eth1.rp_filter = 0

相關內容