☰

如何在代理伺服器中將 ppp0 介面（PPTP VPN）綁定為「外部」？

tag-icon • tag-icon vpn proxy bind route pptp
如何在代理伺服器中將 ppp0 介面（PPTP VPN）綁定為「外部」？

我正在嘗試將 ppp0 介面（PPTP VPN）綁定為代理伺服器（Tinyproxy）中的“外部”介面。不幸的是它不起作用。

使用route add -net default gw 1​​0.9.0.1 我可以使所有流量通過VPN，但這不是我想要的。

ppp0 啟動後我的路線：

default         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
10.9.0.1        *               255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth0 216-18-212-218. 192.168.1.1     255.255.255.255 UGH   0      0  0 eth0

如果配置：

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.100  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21d:60ff:fe25:7ad6  prefixlen 64  scopeid 0x20<link>
        ether 00:1d:60:25:7a:d6  txqueuelen 1000  (Ethernet)
        RX packets 47533  bytes 31947804 (30.4 MiB)
        RX errors 0  dropped 1  overruns 0  frame 0
        TX packets 44946  bytes 6618945 (6.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 13167  bytes 1604741 (1.5 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13167  bytes 1604741 (1.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1496
        inet 10.9.34.125  netmask 255.255.255.255  destination 10.9.0.1
        ppp  txqueuelen 3  (Point-to-Point Protocol)
        RX packets 1088  bytes 568896 (555.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1328  bytes 167081 (163.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

我需要添加其他特定路線嗎？其他代理伺服器？ Tinyproxy'external 應該綁定到什麼IP（我已經嘗試過gw 和peer）？

相關內容