我正在製作履歷。由於我是初學者，我嘗試使用命令\vspace和來進行一些行間距\vfill。但我似乎沒有得到預期的結果。我希望整個文件中的行間距保持一致。任何人都可以向我提出任何建議，以便我可以繼續努力。
我也嘗試過使用\onehalfspacing和\onespacing命令，但似乎都沒有給出好的結果。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\fontfamily{SansSerif}
\selectfont
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\textheight=9.75in
\raggedbottom
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{{\small \colorbox{mygrey}{\begin{minipage}{0.975\textwidth}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\hspace{0.5cm}\\[-0.2cm]
\textbf{Anupam Bisht} \\
\indent $2^{nd}$ Year, B.Tech Student\\
\indent Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
\indent VIT University, Vellore, TN -632014
\hfill Email: [email protected] \\
\resheading{\textbf{OBJECTIVE} }\\[\lsep]
\vspace{4mm} \vfill
\indent To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past \indent can be used to develop a new solution or optimize existing solutions for the profit of company as well as \indent betterment of the society.
\vspace{2mm}
\resheading{\textbf{ACADEMIC DETAILS} }\\[\lsep]
\vspace{5mm} \vfill
%\begin{table}[ht!]
%\begin{center}
\indent \begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
%\end{center}
%\end{table}
\vspace{2mm}
%\resheading{\textbf{FIELDS OF INTEREST} }\\[\lsep]
%\begin{itemize}
%\item \noindent Wireless Network and Network Security, %Another one, a third one
%\end{itemize}
\resheading{\textbf{AREA OF INTEREST} }\\[\lsep]
\vspace{1.0mm}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\vfill
\resheading{\textbf{TECHNICAL SKILLS} }\\[\lsep]
\vfill \vspace{1.0mm}
\begin{itemize}
\item \noindent \textbf{Languages:\space} C ,\space C++,\space Python, \space R
\item \noindent \textbf{Tools:\space}MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \noindent \textbf{Platforms:\space} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS} }\\[\lsep]
\vfill \vspace{0.5mm}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
\indent We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES} }\\[\lsep]
\begin{itemize}
\item \noindent A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item \noindent Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS} }\\[\lsep]
\begin{itemize}
\item \noindent Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item \noindent Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item \noindent Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item \noindent Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item \noindent Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
%\resheading{\textbf{MAJOR PROJECTS AND SEMINAR} }\\[\lsep]
%\begin{itemize}
%\item \textbf{Media Access Control Controling
%} (Research Project) \\
% \emph{(Guide:Prof. Hubert F.
%, May'13 - till date)} \\[-0.6cm]
% \begin{itemize}\itemsep \isep
% \item Objective :Performance analysis of HTTP web browsing traffic.
%.
% \item Performance analysis will help in comparing different MAC protocols based on different network sce-
%narios.
\end{document}
答案1
在查看輸出之前，最好先修復所有警告。
有幾個
Underfull \hbox (badness 10000) in paragraph at lines 45--46
所有這些都是由於濫用\\所以刪除那些，除了使用tabular
然後有幾個
Overfull \hbox (8.59479pt too wide) in paragraph at lines 54--55
[][][][][][][]
每行一個\resheading。
所以將猜測替換0.975\textwidth為\dimexpr\textwidth-2\fboxsep\relax
然後有警告
LaTeX Font Warning: Font shape `T1/SansSerif/m/n' undefined
這是來自
\fontfamily{SansSerif}\selectfont
我假設你打算 \sffamily
然後，我刪除了重複的內容\raggedbottom並刪除了原始語法分配，\textheight就像您已經用來geometry設定頁面的那樣。
然後我刪除了所有的\noindent和\indent
那麼標記至少是合理的，並且沒有來自 TeX 的警告，因此只能查看 PDF。
\documentclass[a4paper,10pt]{article}
%-----------------------------------------------------------
\usepackage[top=0.75in, bottom=0.75in, left=0.55in, right=0.85in]{geometry}
\usepackage{graphicx}
\usepackage{url}
\usepackage{palatino}
\usepackage{makecell}
\usepackage{tabularx}
\usepackage{verbatim}
\usepackage{pbox}
\renewcommand{\labelitemii}{$\star$}
\sffamily
\raggedbottom
\usepackage[T1]{fontenc}
\usepackage
%[ansinew]
[utf8]
{inputenc}
\usepackage{color}
\definecolor{mygrey}{gray}{0.75}
\setlength{\tabcolsep}{0in}
\newcommand{\isep}{-2 pt}
\newcommand{\lsep}{-0.5cm}
\newcommand{\psep}{-0.6cm}
\renewcommand{\labelitemii}{$\circ$}
\pagestyle{empty}
%-----------------------------------------------------------
%Custom commands
\newcommand{\resitem}[1]{\item #1 \vspace{-2pt}}
\newcommand{\resheading}[1]{%
\par
\medskip
{\small
\noindent
\colorbox{mygrey}{\begin{minipage}{\dimexpr\textwidth-2\fboxsep\relax}{\textbf{#1 \vphantom{p\^{E}}}}\end{minipage}}\par
\nopagebreak
\smallskip}}
\newcommand{\ressubheading}[3]{
\begin{tabular*}{6.62in}{l @{\extracolsep{\fill}} r}
\textsc{{\textbf{#1}}} & \textsc{\textit{[#2]}} \\
\end{tabular*}\vspace{-8pt}}
%-----------------------------------------------------------
\begin{document}
\linespread{1.25}
\noindent
\textbf{Anupam Bisht} \\
$2^{nd}$ Year, B.Tech Student\\
Electrical and Electronics Engineering
\hfill Ph: +91 7200660151\\
VIT University, Vellore, TN -632014
mail: [email protected]
\resheading{\textbf{OBJECTIVE}}
To obtain a job in a core-company so that the technical skills and the knowledge acquired during the past can be used to develop a new solution or optimize existing solutions for the profit of company as well as betterment of the society.
\resheading{\textbf{ACADEMIC DETAILS}}
\begin{tabular}{ l @{\hskip 0.15in} l @{\hskip 0.20in} l @{\hskip 0.20in} l @{\hskip 0.20in} l }
\hline
\vspace{0.1mm}
\textbf{Year} &\textbf{Degree} & \textbf{Institute} & \textbf{CGPA/\%} \\
\hline
2015- Present&B.Tech Electrical and Electronics Engineering & VIT Vellore & 9.69 CGPA \\
2015 & 12th CBSE Board Examination & Kendriya Vidyalaya & 94.8\%\\
2013 & 10th CBSE Board Examination & Kendriya Vidyalaya & 10 CGPA\\
\hline
\end{tabular}
\resheading{\textbf{AREA OF INTEREST}}
\begin{itemize}
\item Medical Sensors, circuit design, computer interfacing of hardware, control systems.
\end{itemize}
\resheading{\textbf{TECHNICAL SKILLS}}
\begin{itemize}
\item \textbf{Languages:} C ,\space C++,\space Python, \space R
\item \textbf{Tools:} MATLAB,\space Orcad Pspice,\space Arduino\space, LabView ,\space\LaTeX
\item \textbf{Platforms:} Linux and Windows
\end{itemize}
\resheading{\textbf{PROJECTS}}
\begin{itemize}\itemsep2pt
\item \textbf{Calculation of HeartBeat using Photoplethysmogram in LabVIEW.} \textit{(Feburary 2017 - Currently Working)}
\end{itemize}
We have designed to algorithms, which are inspired from the Pan-Tompkins Algorithm for QRS waveform detection for calculation of heartbeat. We also trying to do statistical analysis of the data using the R software
\resheading{\textbf{EXTRA CURRICULAR ACTIVITIES}}
\begin{itemize}
\item A volunteer at Kulethi primary school Champawat,Uttarakhand. I helped to promote tablet assisted teaching in the primary school.Also helped in video making of basic science experiments in Hindi, which are uploaded in YouTube.(June 2016)
\item Core Committee member at IEEE student chapter of VIT University.
(October 2015 - March 2016)
\end{itemize}
\resheading{\textbf{ACHIEVEMENTS}}
\begin{itemize}
\item Awarded with cash prize for ranking 3rd out of the 250 students in the branch at VIT University for the academic year 2016-17.
\item Awarded with cash prize for ranking 2nd out of the 250 students in the branch at VIT University for the academic year 2015-16.
\item Awarded with cash prize for scoring 10 CGPA in class 10th Board Examination.
\item Selected to represent KVS for Jawaharlal Nehru National Science, Mathematics and Environment Exhibition for children(JNNSMEE) held at Gangtok, Sikkim during November 2013.
\item Awarded 3rd Prize at KVS National Level Science Exhibition held at Kendriya Vidiyalaya Ballygunge, Kolkata for the project titled "Principle of Fiber Optic Communication and Related Applications" in the year 2012.
\end{itemize}
\end{document}
產生
這可能不完全是您想要的行間距，但它應該為任何進一步的間距規範形成更穩定的基礎。