如何使用Circuitikz在其頂部寫上元件訊息，並在底部寫上一個箭頭？

Question

事實上，我想對我使用 Circuitikz 繪製的電路進行一些更改。這是代碼：

\documentclass[review]{elsarticle}
\usepackage{graphicx}
\usepackage{amssymb,amsmath,nccmath}
\usepackage{cclicenses}
\usepackage{makecell}
\usepackage[straightvoltages]{circuitikz}
\usetikzlibrary{arrows}
\usepackage{lscape,array}


\begin{document}
\begin{circuitikz}[scale=0.5][american voltages]
\ctikzset{bipoles/length=.8cm}
\draw

(0,0) to [open,v>=${v}_{ds}$] (0,5) 
to [short, *- ,i=${i}_{ds}$] (0.3,5)
to [R, l=$R_s$] (2,5) 
to [L, l=$X_s$] (3.2,5)
to [european voltage source, l_=${\omega}_s {\phi}_{qs}$] (4.9,5)
(4.5,5) to [short, -] (5,5)
(5,5) to [L, l_=$X_m$] (5,0)

(5,5) to [european voltage source, l_=${\omega}_r {\phi}_{qr}$] (7,5)
to [L, l=$X_r$] (8,5)
to [R, l=$R_r$] (10,5)
to [short, -* ,i<=${i}_{dr}$] (10.3,5) 
(10.3,0) to [open, v>=${v}_{dr}$] (10.3,5)
(0,0) to [short, *-*] (10.3,0);
\end{circuitikz}
\end{document}

更準確地說，這是我編譯後想做的事：

Answer 1

對我來說，不太清楚你想要實現什麼。據我了解，如果你想要這個： 那你應該使用這段程式碼：

\documentclass[review]{elsarticle}
\usepackage{graphicx}
\usepackage{amssymb,amsmath,nccmath}
\usepackage{cclicenses}
\usepackage{makecell}
\usepackage[straightvoltages]{circuitikz}
\usetikzlibrary{arrows}
\usepackage{lscape,array}


\begin{document}
\begin{circuitikz}[scale=0.5][american voltages]
\ctikzset{bipoles/length=.8cm}
\draw

(0,0) to [open,v>=$v_{ds}$] (0,5) 
to [short, *- ,i=$i_{ds}$] (0.3,5)
to [R, l=$R_s$] (2,5) 
to [L, l=$X_s$] (3.2,5)
to [european voltage source, l^=$\omega_s \phi_{qs}$] (4.9,5)
(4.5,5) to [short, -] (5,5)
(5,5) to [L, l_=$X_m$] (5,0)


(5,5) to [european voltage source, l^=$\omega_r \phi_{qr}$] (7,5)
to [L, l=$X_r$] (8,5)
to [R, l=$R_r$] (10,5)
to [short, -* ,i<=$i_{dr}$] (10.3,5) 
(10.3,0) to [open, v>=$v_{dr}$] (10.3,5)
(0,0) to [short, *-*] (10.3,0);
\draw[->](3.5,4.3) -- (4.9,4.3);
\draw[->](6.5,4.3) -- (5.1,4.3);
\end{circuitikz}
\end{document}