一半文字在多行表格中不可見

Question

我使用 siunitx 和多行套件。如圖所示，多原始文字的一半被剪切。

\documentclass[super,square,compress,sort,num-refs]{wiley-article}
\usepackage{siunitx}
\usepackage[normalem]{ulem}
\usepackage{multirow}
\usepackage{mciteplus}
\usepackage{natbib}
\usepackage{lettrine}
\usepackage{setspace}
\usepackage{float}
\usepackage{booktabs}
\usepackage{marginnote}
\usepackage[T1]{fontenc}
\useunder{\uline}{\ul}{}

\begin{table}[!ht]
\centering
\caption{Not working table}
\footnotesize
\label{tab:Table not working}
\begin{tabular}{cccccc}
{} & Name & \begin{tabular}[c]{@{}c@{}}flow\\ {(}unit{)}\end{tabular} & \begin{tabular}[c]{@{}c@{}}speed\\ {(}unit{)}\end{tabular} & \begin{tabular}[c]{@{}c@{}}time\\ {(}unit{)}\end{tabular} & \begin{tabular}[c]{@{}c@{}}Pressure\\ {(}unit{)}\end{tabular} \\ \hline

{\multirow{2}{*}{Value 1}} & {A}    & 80 & 20 & 50 &{\multirow{2}{*}{Value 3}}   \\
                               & {B} & 80 & 20 & 50 &                          \\
{\multirow{2}{*}{Value 2}}     & {C} & 40 & 40 & 50 & {\multirow{2}{*}{Value 4}} \\
                               & {D} & 40 & 20 & \multicolumn{1}{l}{50} &      \\ \hline
\end{tabular}
\end{table}

Answer 1

我懷疑你在尋找

• 您的文件範例不完整，缺少的是\begin{document}和\end{document}
• 表程式碼不包含為行著色的程式碼
• 因為我沒有使用文檔類，所以我使用標準article.解決方案wiley-article也必須與
• 當行著色時，您必須移動multirow到多行單元格的末尾：\multirow{-2}{*}{Value 1}

看看以下 mwe 是否會產生類似上面所示的圖像：

\documentclass[super,square,compress,sort,num-refs]{wiley-article}
\usepackage{siunitx}
\usepackage[normalem]{ulem}
\usepackage{mciteplus}
\usepackage{natbib}
\usepackage{lettrine}
\usepackage{setspace}
\usepackage{float}
\usepackage{booktabs,  multirow}
\usepackage{marginnote}
\usepackage[T1]{fontenc}
\useunder{\uline}{\ul}{}
\newcommand\MakeCell[1]{\begin{tabular}[b]{@{} c @{}}#1\end{tabular}}

\begin{document}
    \begin{table}[!ht]
\centering
\caption{Not working table}
\footnotesize
\label{tab:Table not working}
\begin{tabular}{cc cc cc}
    \hline
                            & Name
                                & \makecell[b]{flow\\ (unit)}
                                     & \makecell[b]{speed\\ (unit)}
                                          & \makecell[b]{time\\ (unit)}
                                               & \makecell[b]{Pressure\\ (unit)}  \\
    \hline
                            & A & 80 & 20 & 50 &                            \\
\multirow{-2}{*}{Value 1}   & B & 80 & 20 & 50 & \multirow{-2}{*}{Value 3}  \\
                            & C & 40 & 40 & 50 &                            \\
\multirow{-2}{*}{Value 2}   & D & 40 & 20 & 50 & \multirow{-2}{*}{Value 4}  \\
    \hline
\end{tabular}
    \end{table}
\end{document}