我的嘗試程式碼

Question

我正在嘗試繪製以下“流程圖”

經過一番擺弄後，我想出了以下解決方案

我所遇到的困難主要歸結為兩件事

• 如何對齊箭頭以便它們以直角擊中盒子？現在我已經猜到了，並且大概知道要把它們放在哪裡。
• 有沒有簡單的方法來獲得如圖所示的粗箭頭？

一如既往地歡迎任何獲得所需圖像的替代解決方案。

我的嘗試程式碼

\documentclass{article} 

\usepackage{xcolor}
\definecolor{UiT-main}{HTML}{003349}
\definecolor{UiT-red}{HTML}{CB333B}
\definecolor{UiT-blue}{HTML}{007396}
\definecolor{UiT-cyan}{HTML}{59BEC9}
\definecolor{UiT-orange}{HTML}{F2A900}

\usepackage{tikz}
\usetikzlibrary{shapes,arrows,calc}

% Define block styles
\tikzstyle{sun} = [circle,minimum height=0.6cm, draw, fill=UiT-orange, 
text width=4.5em, text badly centered, node distance=3cm, inner sep=0pt]
\tikzstyle{sunEmpty} = [circle,minimum height=0.6cm, 
text width=4.5em, text badly centered, node distance=3cm, inner sep=0pt]
\tikzstyle{block} = [rectangle, draw, fill=green!20, 
text width=20em, text centered, minimum height=4em]
\tikzstyle{line} = [draw, -latex']

\begin{document}

\begin{tikzpicture}[node distance = 2cm, auto]
% Place nodes
\node [sun] (Sun) {Sun};
\node [sunEmpty,right of=Sun] (SunEmpty) {};
\node [block, right of=Sun, yshift=-2cm] (greenhouse) {Greenhouse layer};
\node [block, fill=black!20, below of=greenhouse, yshift=-2cm] (surface) {surface};
% Draw edges  
\path [line] (Sun) -- node {}($(surface.north west)!0.23!(surface.north east)$);
\path [line,shorten <=0.25cm,shorten >=0.25cm] (surface) -- node {}(greenhouse);
\path [line] ($(greenhouse.north west)!0.64!(greenhouse.north east)$) -- node {}(SunEmpty.north);
\end{tikzpicture}
\end{document}

Answer 1

如何對齊箭頭以便它們以直角擊中盒子？現在我已經猜到了，並且大概知道要把它們放在哪裡。

該座標的(surface.north-|sun)x 座標值為sun，y 座標值為surface.north。所以下面的物體會以直角path撞擊盒子 ( )surface

\path (Sun) -- (surface.north-|Sun);

有沒有簡單的方法來獲得如圖所示的粗箭頭？

增加line width。

另外，調整了outer sepof nodes 以使箭頭不會接觸到節點。

微量元素

\documentclass[margin=3mm]{standalone} 
\usepackage{xcolor}
\usepackage{tikz}
\definecolor{UiT-main}{HTML}{003349}
\definecolor{UiT-red}{HTML}{CB333B}
\definecolor{UiT-blue}{HTML}{007396}
\definecolor{UiT-cyan}{HTML}{59BEC9}
\definecolor{UiT-orange}{HTML}{F2A900}

% Define block styles
\tikzset{sunEmpty/.style={circle,minimum height=0.6cm, 
text width=4.5em, text badly centered, node distance=3cm, inner sep=0pt, outer sep=1mm},
sun/.style={sunEmpty,draw,fill=UiT-orange},
block/.style={rectangle, draw, fill=green!20,
text width=20em, text centered, minimum height=4em, outer sep=1mm},
line/.style={-latex, line width=1.8mm, draw=blue!40}}

\begin{document}
\begin{tikzpicture}[node distance = 2cm, auto]
% Place nodes
\node [sun] (Sun) {Sun};
\node [sunEmpty,right of=Sun] (SunEmpty) {};
\node [block, right of=Sun, yshift=-2cm] (greenhouse) {Greenhouse layer};
\node [block, fill=black!20, below of=greenhouse, yshift=-2cm] (surface) {surface};
% Draw edges  
\path [line,UiT-orange] (Sun) -- (surface.north-|Sun);
\path [line] (surface) -- (greenhouse);
\path [line] (greenhouse.north-|SunEmpty) -- (SunEmpty.north);
\end{tikzpicture}
\end{document}

編輯-更好的版本（感謝用戶121799）

\documentclass[margin=3mm,tikz]{standalone} 
\usetikzlibrary{shapes.arrows,calc,shadows.blur,positioning}
\definecolor{UiT-main}{HTML}{003349}
\definecolor{UiT-red}{HTML}{CB333B}
\definecolor{UiT-blue}{HTML}{007396}
\definecolor{UiT-cyan}{HTML}{59BEC9}
\definecolor{UiT-orange}{HTML}{F2A900}

% Define block styles
\tikzset{sun/.style={circle,minimum height=0.6cm, draw, fill=UiT-orange, 
text width=4.5em, text badly centered, node distance=3cm, inner sep=0pt, outer
sep=1mm},
sunEmpty/.style={circle,minimum height=0.6cm, 
text width=4.5em, text badly centered, node distance=3cm, inner sep=0pt, outer
sep=1mm},
block/.style={rectangle, draw, fill=green!20, 
text width=20em, text centered, minimum height=4em, outer sep=1mm},
line/.style={-latex, double arrow, line width=1.8mm, draw=blue!40}}

\begin{document}
\begin{tikzpicture}[node distance = 2cm, auto,
  fat arrow/.style={% https://tex.stackexchange.com/a/432147/121799
      to path={
        let \p1 = ($(\tikztotarget)-(\tikztostart)$),
            \n1 = {int(mod(scalar(atan2(\y1,\x1))+360, 360))}, % calculate angle in range [0,360)
            \n2 = {veclen(\x1,\y1)}
        in
        -- (\tikztotarget)
        node[inner xsep=0pt,inner ysep=5pt, % use inner ysep to set width
             minimum height=\n2-\pgflinewidth,
             single arrow,midway,sloped,anchor=center,
             #1          % arguments passed to fat arrow added here
             ] {} \tikztonodes}
  },
  fat arrow/.default=, % empty default for argument of fat arrow
  pft/.style={single arrow,draw=blue,blur
shadow,xshift=-2pt,minimum width=10mm, single arrow head extend=.2cm }
]
% Place nodes
\node [sun,blur shadow] (Sun) {Sun};
\node [sunEmpty,right=2.2cm of Sun] (SunEmpty) {};
\node [block, right of=Sun, yshift=-2cm,blur shadow,rounded corners=2pt] (greenhouse) {Greenhouse layer};
\node [block, fill=black!20, below of=greenhouse, yshift=-2cm,blur shadow,rounded corners=2pt] (surface) {surface};
% Draw edges  
\path [fat arrow={pft,top color=UiT-orange!80,bottom color=UiT-orange}]
(Sun.south) to (surface.north-|Sun) ;
\path [fat arrow={pft,top color=blue!20,bottom color=blue!40}]
(surface.north) to (greenhouse.south);
\path [fat arrow={pft,top color=blue!20,bottom color=blue!40,minimum width=5mm}]
(greenhouse.north-|SunEmpty) to (SunEmpty.north);
\path [fat arrow={pft,top color=blue!20,bottom color=blue!40,minimum width=5mm}]
(greenhouse.south-|SunEmpty) to (surface.north-|SunEmpty);
\end{tikzpicture}
\end{document}