我正在嘗試將當前的 RAID 1 轉換為 RAID0+1，並在安裝引導程式時遇到問題 - 請看看我在做什麼。
我目前的配置是RAID1(2*10GB)：
[root@localhost ~]# mdadm --detail /dev/md0
/dev/md0:
Version : 1.0
Creation Time : Thu May 8 20:13:26 2014
Raid Level : raid1
Array Size : 10279808 (9.80 GiB 10.53 GB)
Used Dev Size : 10279808 (9.80 GiB 10.53 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Wed May 14 21:49:34 2014
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : livecd.centos:0
UUID : 877ab4b2:7d4a61f7:a732e1c0:115c9ee5
Events : 72
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
1 8 18 1 active sync /dev/sdb2
現在，我在我的虛擬機器中新增了 2 * 2GB 硬碟 - 在我降級 RAID1 後；使用故障磁碟機和我製作的新磁碟機 raid0 ：
[root@localhost ~]# mdadm /dev/md0 -f /dev/sdb2 -r /dev/sdb2
mdadm: set /dev/sdb2 faulty in /dev/md0
mdadm: hot removed /dev/sdb2 from /dev/md0
[root@localhost ~]# fdisk /dev/sdc
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 2
First cylinder (1-261, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-261, default 261):
Using default value 261
Command (m for help): t
Selected partition 2
Hex code (type L to list codes): fd
Changed system type of partition 2 to fd (Linux raid autodetect)
Command (m for help): wq
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost ~]# mkfs.ext4 /dev/sdc2
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
131072 inodes, 524112 blocks
26205 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=536870912
16 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 38 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@localhost ~]# mdadm --zero-superblock /dev/sdb2
建置 RAID0，以便我可以成為 RAID1 的一部分
[root@localhost ~]# mdadm --create /dev/md5 --name=5 --homehost=livecd.centos -l 0 -n 2 /dev/sdb2 /dev/sdc2
mdadm: /dev/sdb2 appears to contain an ext2fs file system
size=10279808K mtime=Wed May 14 21:28:53 2014
mdadm: /dev/sdc2 appears to contain an ext2fs file system
size=2096448K mtime=Thu Jan 1 04:00:00 1970
Continue creating array? y
mdadm: Defaulting to version 1.2 metadata
mdadm: array /dev/md5 started.
[root@localhost ~]# cat /proc/mdstat
Personalities : [raid0] [raid1]
md5 : active raid0 sdc2[1] sdb2[0]
12375552 blocks super 1.2 512k chunks
md0 : active raid1 sda2[0]
10279808 blocks super 1.0 [2/1] [U_]
bitmap: 1/1 pages [4KB], 65536KB chunk
md1 : active raid0 sdb1[1] sda1[0]
408576 blocks super 1.1 512k chunks
unused devices: <none>
將 RAID0 新增至降級的 RAID1
[root@localhost ~]# mdadm --add /dev/md0 /dev/md5
mdadm：新增了 /dev/md5
[root@localhost ~]# cat /proc/mdstat
Personalities : [raid0] [raid1]
md5 : active raid0 sdc2[1] sdb2[0]
12375552 blocks super 1.2 512k chunks
md0 : active raid1 md5[2] sda2[0]
10279808 blocks super 1.0 [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk
md1 : active raid0 sdb1[1] sda1[0]
408576 blocks super 1.1 512k chunks
unused devices: <none>
[root@localhost ~]# mdadm --detail /dev/md0
/dev/md0:
Version : 1.0
Creation Time : Thu May 8 20:13:26 2014
Raid Level : raid1
Array Size : 10279808 (9.80 GiB 10.53 GB)
Used Dev Size : 10279808 (9.80 GiB 10.53 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Intent Bitmap : Internal
Update Time : Wed May 14 22:13:20 2014
State : active
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : livecd.centos:0
UUID : 877ab4b2:7d4a61f7:a732e1c0:115c9ee5
Events : 191
Number Major Minor RaidDevice State
0 8 2 0 active sync /dev/sda2
2 9 5 1 active sync /dev/md5
現在是時候安裝引導程式了 - 這是我失敗的步驟，需要您的幫助。
[root@localhost ~]# grub
Probing devices to guess BIOS drives. This may take a long time.
Unknown partition table signature
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename.]
grub> find /boot/grub/grub.conf
find /boot/grub/grub.conf
(hd0,1)
grub> device (hd1) /dev/sdb
device (hd1) /dev/sdb
grub> root (hd1,1)
root (hd1,1)
Filesystem type is ext2fs, partition type 0xfd
grub> setup (hd1)
setup (hd1)
Checking if "/boot/grub/stage1" exists... no
Checking if "/grub/stage1" exists... no
Error 2t: Bad file or directory type
grub>
在我的情況下，我應該在哪裡安裝引導程式？
md5 有 /dev/sdb2 和 /dev/sdc2 引導程式應該安裝在哪裡？
這些 /dev/sdb2 或 /dev/sdc2 不會出現在 grub 下。
一旦為 raid0 安裝了引導程序，我將對 /dev/sda2 重複相同的過程。