為什麼我對 10.8.0.1 的 ping 操作是透過公共互聯網進行的

為什麼我對 10.8.0.1 的 ping 操作是透過公共互聯網進行的

(這個問題以前完全不同。因為缺乏基礎知識加上偏執,我很害怕,以為我的區域網路中的某些東西受到了損害......)現在我完全編輯了它,這樣也許有人可以改進它

我正在研究伺服器配置和 openvpn。我的 openvpntests 中的所有內容都應該只發生在我的區域網路內...

in the client.conf:
remote "ServersLanIp" 1194 
(somthing like 192.168.2.123)

當沒有建立 VPN 連線時,我正在 ping OpenVPN 伺服器的 VPN-IP-位址。

ping 10.8.0.1
PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data.
From 195.xx.xxx.xxx icmp_seq=7 Packet filtered
From 195.xx.xxx.xxx icmp_seq=8 Packet filtered

195...???我做了一個路由追蹤:

traceroute to 195.xx.xxx.xxx(195.xx.xxx.xxx), 30 hops max, 60 byte packets

showed some route to the internet

openvpn-server 和 openvpn-client 都在同一個區域網路中,為什麼 ping 是透過公用網際網路?

答案1

你所報告的任何事情絕對沒有任何異常。我不確定我是否理解你為什麼害怕或為什麼你認為有妥協,所以我很難弄清楚我需要向你解釋什麼。您將一個不屬於公共互聯網的資料包放在公共互聯網上,它遵循預設路由一段時間,而第一台檢查的機器拒絕了它。這有什麼奇怪的?

相關內容