編輯:這是我使用程式碼重命名介面後的精確情況。
這是我的網路規劃設定檔:
network:
version: 2
renderer: networkd
ethernets:
eno1:
dhcp4: no
dhcp6: no
addresses: [192.168.1.93/24]
gateway4: 192.168.1.91
nameservers:
addresses: [8.8.8.8, 8.8.4.4]
這是輸出ip位址ls
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: rename2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:1e:67:d6:33:24 brd ff:ff:ff:ff:ff:ff
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 00:1e:67:d6:33:25 brd ff:ff:ff:ff:ff:ff
當我跑步時sudo netplan --debug 生成我得到這個輸出:
** (generate:1571): DEBUG: 00:08:01.444: Processing input file //etc/netplan/10-systemd-networkd-eth.yaml..
** (generate:1571): DEBUG: 00:08:01.444: starting new processing pass
** (generate:1571): DEBUG: 00:08:01.444: eno1: setting default backend to 1
** (generate:1571): DEBUG: 00:08:01.444: Generating output files..
** (generate:1571): DEBUG: 00:08:01.444: NetworkManager: definition eno1 is not for us (backend 1)
這是輸出systemctl 狀態 systemd-networkd:
systemd-networkd.service - Network Service
Loaded: loaded (/lib/systemd/system/systemd-networkd.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2018-08-29 23:31:20 IST; 1h 1min ago
Docs: man:systemd-networkd.service(8)
Main PID: 570 (systemd-network)
Status: "Processing requests..."
Tasks: 1 (limit: 4915)
CGroup: /system.slice/systemd-networkd.service
└─570 /lib/systemd/systemd-networkd
Aug 29 23:31:19 august2018 systemd[1]: Starting Network Service...
Aug 29 23:31:20 august2018 systemd-networkd[570]: Enumeration completed
Aug 29 23:31:20 august2018 systemd[1]: Started Network Service.
Aug 29 23:35:01 august2018 systemd-networkd[570]: eno1: Gained carrier
Aug 29 23:35:03 august2018 systemd-networkd[570]: eno1: Gained IPv6LL
答案1
ethMac
您已在需要實際介面名稱的地方使用了文字字串。將其變更為介面名稱,您可以透過執行命令來了解該名稱ip link
。