Linux 上 USB3 外部儲存的連線問題(UAS 驅動程式問題)

Linux 上 USB3 外部儲存的連線問題(UAS 驅動程式問題)

在 Ubuntu 15.10 上,當我想使用 NTFS 檔案系統格式化透過 USB3 連接的外部 4TO 磁碟(在 StarTech USB/eSATA 硬碟底座上)時,我有很多I/O 錯誤,並且格式化失敗。

我嘗試了 GParted v 0.19 和最新 live CD 上的 GParted gparted-live-0.23.0-1-i586.iso,也遇到了同樣的問題。

之後,在 Ubuntu 15.10 上使用 GParted 和相同的 USB3 連接,我嘗試格式化為ext4,沒有出現問題。真的很奇怪。

因為我不知道mkfs.ext4GParted 用於格式化磁碟的工具是否對磁碟進行了類似(或不類似)的測試mkntfs,所以我首先假設問題與新磁碟有關。也許這個新磁碟引起了問題。所以我嘗試e2fsck -c在這個硬碟上運行。在 Ubuntu 15.10 上,e2fsck -c凍結在 0.45%,我不知道為什麼。

因此,在同一台 PC 上使用另一個版本的 Ubuntu (15.04),我嘗試使用 StarTech HDD 塢站的 eSATA 連接來連接同一個 4TO 磁碟。這次,e2fsck -c運行正確。

幾個小時後,您可以看到結果:

sudo e2fsck -c /dev/sdc1
e2fsck 1.42.12 (29-Aug-2014)
ColdCase : récupération du journal
Vérification des blocs défectueux (test en mode lecture seule) : complété                                             
ColdCase: Updating bad block inode.
Passe 1 : vérification des i-noeuds, des blocs et des tailles
Passe 2 : vérification de la structure des répertoires
Passe 3 : vérification de la connectivité des répertoires
Passe 4 : vérification des compteurs de référence
Passe 5 : vérification de l'information du sommaire de groupe

ColdCase: ***** LE SYSTÈME DE FICHIERS A ÉTÉ MODIFIÉ *****
ColdCase : 11/244195328 fichiers (0.0% non contigus), 15377150/976754176 blocs

我不是輸出的專家badblock,但看起來這個磁碟上根本沒有壞塊?

那麼,如果問題不是硬碟,也許問題可能與mkntfs透過 USB3 使用有關?我還可以嘗試哪些其他測試?

有關 USB 塢站的一些資訊:

➜  ~  lsusb
...
Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
...


➜  ~  sudo lsusb -v -d 174c:55aa
Mot de passe [sudo] pour reyman : 

Bus 002 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         9
  idVendor           0x174c ASMedia Technology Inc.
  idProduct          0x55aa ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge
  bcdDevice            1.00
  iManufacturer           2 asmedia
  iProduct                3 ASM1053E
  iSerial                 1 123456789012
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          121
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower               36mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           4
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     98 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             16
        Data-in pipe (0x03)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             16
        Data-out pipe (0x04)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
        MaxStreams             16
        Status pipe (0x02)
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst               0
        Command pipe (0x01)
Binary Object Store Descriptor:
  bLength                 5
  bDescriptorType        15
  wTotalLength           22
  bNumDeviceCaps          2
  USB 2.0 Extension Device Capability:
    bLength                 7
    bDescriptorType        16
    bDevCapabilityType      2
    bmAttributes   0x00000002
      Link Power Management (LPM) Supported
  SuperSpeed USB Device Capability:
    bLength                10
    bDescriptorType        16
    bDevCapabilityType      3
    bmAttributes         0x00
    wSpeedsSupported   0x000e
      Device can operate at Full Speed (12Mbps)
      Device can operate at High Speed (480Mbps)
      Device can operate at SuperSpeed (5Gbps)
    bFunctionalitySupport   1
      Lowest fully-functional device speed is Full Speed (12Mbps)
    bU1DevExitLat          10 micro seconds
    bU2DevExitLat        2047 micro seconds
Device Status:     0x0001
  Self Powered

有關有問題的磁碟的資訊:/dev/sdd

➜  ~  sudo fdisk -l /dev/sdd
Disque /dev/sdd : 3,7 TiB, 4000787030016 octets, 7814037168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 33553920 bytes
Disklabel type: gpt
Disk identifier: ACD5760B-2898-435E-82C6-CB3119758C9B

Périphérique Start        Fin   Secteurs  Size Type
/dev/sdd1     2048 7814035455 7814033408  3,7T Linux filesystem

dmesg傳回大量有關磁碟的錯誤;請參閱此摘錄:

[   68.856381] scsi host6: uas_eh_bus_reset_handler start
[   68.968376] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[   68.989825] scsi host6: uas_eh_bus_reset_handler success
[   99.881608] sd 6:0:0:0: [sdd] tag#12 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUT 
[   99.881618] sd 6:0:0:0: [sdd] tag#12 CDB: Write(16) 8a 00 00 00 00 00 e8 c4 08 00 00 00 00 08 00 00
[   99.881856] sd 6:0:0:0: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
[   99.881861] sd 6:0:0:0: [sdd] tag#5 CDB: Write(16) 8a 00 00 00 00 00 cd 01 08 f0 00 00 00 10 00 00
[   99.881967] sd 6:0:0:0: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
[   99.881972] sd 6:0:0:0: [sdd] tag#4 CDB: Write(16) 8a 00 00 00 00 00 cd 01 08 00 00 00 00 f0 00 00
[   99.882085] sd 6:0:0:0: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
[   99.882090] sd 6:0:0:0: [sdd] tag#3 CDB: Write(16) 8a 00 00 00 00 00 cd 01 07 10 00 00 00 f0 00 00
[   99.882171] sd 6:0:0:0: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
[   99.882175] sd 6:0:0:0: [sdd] tag#2 CDB: Write(16) 8a 00 00 00 00 00 cd 01 06 20 00 00 00 f0 00 00
[   99.882255] sd 6:0:0:0: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT 
[   99.882258] sd 6:0:0:0: [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 00 cd 01 05 30 00 00 00 f0 00 00
[   99.882338] sd 6:0:0:0: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
[   99.882342] sd 6:0:0:0: [sdd] tag#0 CDB: Write(16) 8a 00 00 00 00 00 cd 01 04 40 00 00 00 f0 00 00
[   99.882419] sd 6:0:0:0: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT 
[   99.882423] sd 6:0:0:0: [sdd] tag#11 CDB: Write(16) 8a 00 00 00 00 00 cd 00 f9 00 00 00 00 f0 00 00
[   99.882480] sd 6:0:0:0: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT 
[   99.882483] sd 6:0:0:0: [sdd] tag#10 CDB: Write(16) 8a 00 00 00 00 00 cd 00 f9 f0 00 00 00 f0 00 00
[   99.882530] sd 6:0:0:0: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT 
[   99.882532] sd 6:0:0:0: [sdd] tag#9 CDB: Write(16) 8a 00 00 00 00 00 cd 00 fa e0 00 00 00 f0 00 00
[   99.882593] sd 6:0:0:0: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD 
[   99.882596] sd 6:0:0:0: [sdd] tag#8 CDB: Write(16) 8a 00 00 00 00 00 cd 00 fb d0 00 00 00 f0 00 00
[   99.882667] scsi host6: uas_eh_bus_reset_handler start
[   99.994700] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
[  100.015613] scsi host6: uas_eh_bus_reset_handler success
[  135.962175] sd 6:0:0:0: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT 
[  135.962185] sd 6:0:0:0: [sdd] tag#5 CDB: Write(16) 8a 00 00 00 00 00 cd 40 78 f0 00 00 00 10 00 00
[  135.962428] sd 6:0:0:0: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT 
[  135.962436] sd 6:0:0:0: [sdd] tag#4 CDB: Write(16) 8a 00 00 00 00 00 cd 40 78 00 00 00 00 f0 00 00
[  135.962567] sd 6:0:0:0: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT 
[  135.962576] sd 6:0:0:0: [sdd] tag#3 CDB: Write(16) 8a 00 00 00 00 00 cd 40 77 10 00 00 00 f0 00 00
[  135.962682] sd 6:0:0:0: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT 
[  135.962690] sd 6:0:0:0: [sdd] tag#2 CDB: Write(16) 8a 00 00 00 00 00 cd 40 76 20 00 00 00 f0 00 00
[  135.962822] sd 6:0:0:0: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD 
[  135.962830] sd 6:0:0:0: [sdd] tag#1 CDB: Write(16) 8a 00 00 00 00 00 cd 40 75 30 00 00 00 f0 00 00
[  160.904916] sd 6:0:0:0: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT 
[  160.904926] sd 6:0:0:0: [sdd] tag#0 CDB: Write(16) 8a 00 00 00 00 00 00 00 29 08 00 00 00 08 00 00
[  160.905068] scsi host6: uas_eh_bus_reset_handler start

我找到了這個訊息論壇貼文,UAS 和新的 Linux 核心存在一些問題嗎?它似乎問題是已知的在許多地方在互聯網上,USB3 + Linux 在許多情況下似乎都有問題——但對於舊核心來說。有什麼想法可以在更新的核心上解決這個問題嗎?

我的內核是:

➜  ~  uname -r 
4.2.0-16-generic

嗯,對於不同的 USB3 晶片,UAS 似乎已損壞ASMedia Technology Inc.;你可以看到更多訊息這裡

我想這是我的問題,但現在我該如何解決它,StarTech 塢站中的 USB3 實現使用哪個晶片?

答案1

我在 Mint 18 上遇到了同樣的問題,但我找到的解決方案可能適用於 *Ubuntu 15/16 以及類似的 Linux 發行版。然而,對我來說,在 dmesg 中看到 UAS 錯誤後不久,我就遇到了不可恢復的系統鎖定。

我的外殼有一個 ASMedia ASM1053 晶片,它似乎與我的核心 (4.4.0-72-generic) 的 UAS 模組有問題。

經過一番搜索,我結合了找到的兩個解決方案:YtvwlD提到的這個這個

首先,您必須使用下列命令取得裝置的硬體 IDLSSB命令。完成此操作後,找到您的外部/外殼/橋接器。它可能會顯示如下:

Bus 002 Device 002: ID 174c:5136 ASMedia Technology Inc. ASM1053 SATA 6Gb/s bridge

就我而言,ID 是174c:5136

之後,您必須在中建立一個文件/etc/modprobe.d/因此,正確的裝置已被列入使用 UAS 的黑名單(這會導致問題),請使用更新 initramfs 映像更新 initramfs,然後重新啟動以使變更生效。

$ echo options usb-storage quirks=174c:5136:u | sudo tee /etc/modprobe.d/blacklist_uas.conf
$ sudo update-initramfs -u
$ sudo reboot

當然,請將“174c:5136”替換為您的網橋/機箱/外部設備的硬體 ID。如果操作正確,您應該會看到類似這樣的訊息訊息重新啟動後連接裝置時:

[   93.985002] usb 4-1: UAS is blacklisted for this device, using usb-storage instead

從那時起我的外殼就再也沒有出現過任何問題。

答案2

我今天在 4.8.0 核心上遇到了這個問題。

根據這個論壇貼文它可以透過以下方式規避

$ echo options usb-storage quirks=357d:7788:u | sudo tee /etc/modprobe.d/blacklist_uas_357d.conf
$ sudo update-initramfs -u

並重新啟動。

答案3

為了即時應用其他答案提到的怪癖,您還可以在運行時設定它:

echo "152d:0583:u" | sudo tee /sys/module/usb_storage/parameters/quirks

152d:0583當然,請替換為您裝置的 USB 裝置 ID。

這會將模組quirks的參數usb-storage設為上述值,而無需重新啟動。

相關內容