我使用正常的 mdadm 進程為兩個驅動器（sde 和 sdf）創建了 raid-1 陣列，並在 md1 下創建了它並將其安裝到 /mnt/storage。重啟後 md1 不再存在。我的 /mnt/plex 工作正常。我的陣列消失了還是我只需要將分割區指向正確的安裝點？
跑步lsblk給了我
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
loop0 7:0 0 63.4M 1 loop /snap/core20/1974
loop1 7:1 0 63.5M 1 loop /snap/core20/2015
loop2 7:2 0 40.8M 1 loop /snap/snapd/19993
loop3 7:3 0 111.9M 1 loop /snap/lxd/24322
loop4 7:4 0 40.8M 1 loop /snap/snapd/20092
sda 8:0 1 7.3T 0 disk
└─md0 9:0 0 21.8T 0 raid5 /mnt/plex
sdb 8:16 1 7.3T 0 disk
└─md0 9:0 0 21.8T 0 raid5 /mnt/plex
sdc 8:32 1 7.3T 0 disk
└─md0 9:0 0 21.8T 0 raid5 /mnt/plex
sdd 8:48 1 7.3T 0 disk
└─md0 9:0 0 21.8T 0 raid5 /mnt/plex
sde 8:64 0 3.6T 0 disk
sdf 8:80 0 3.6T 0 disk
nvme0n1 259:0 0 931.5G 0 disk
├─nvme0n1p1 259:1 0 1G 0 part /boot/efi
└─nvme0n1p2 259:2 0 930.5G 0 part /
跑步blkid給了我
/dev/nvme0n1p1: UUID="255C-50C9" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="26565297-8615-4534-88b8-a160ab111fe4"
/dev/nvme0n1p2: UUID="ac32d63a-e8dc-4f58-b677-507491ed46de" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="25fa09fa-6781-49bf-927c-89e721f71154"
/dev/sdd: UUID="8051a9fa-3272-6a40-3950-5897a2b600f4" UUID_SUB="cb838ac3-6c2a-bfb0-fd0d-f7c63c447aa3" LABEL="tron:0" TYPE="linux_raid_member"
/dev/sdb: UUID="8051a9fa-3272-6a40-3950-5897a2b600f4" UUID_SUB="e4209087-7804-1e66-c3d2-dfef0f898b73" LABEL="tron:0" TYPE="linux_raid_member"
/dev/md0: UUID="f81c3ae4-363f-453a-ab49-1e716b27fc3b" BLOCK_SIZE="4096" TYPE="ext4"
/dev/sdc: UUID="8051a9fa-3272-6a40-3950-5897a2b600f4" UUID_SUB="f8da02fe-22e3-6f55-880d-c1d52c78167e" LABEL="tron:0" TYPE="linux_raid_member"
/dev/sda: UUID="8051a9fa-3272-6a40-3950-5897a2b600f4" UUID_SUB="d6bfc2f7-056d-441a-023f-25d73804c456" LABEL="tron:0" TYPE="linux_raid_member"
/dev/loop1: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop0: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/sdf: PTUUID="e6979b33-6f82-11ea-96f0-0026b98cb28a" PTTYPE="gpt"
/dev/sde: PTUUID="e6a40000-6f82-11ea-96f0-0026b98cb28a" PTTYPE="gpt"
這是我的註釋中的內容/etc/fstab：我取消註釋了最後兩行，因為它導致了超時問題，取消註釋有所幫助並且它不會掛起，但這可能是問題的一部分
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/nvme0n1p2 during curtin installation
/dev/disk/by-uuid/ac32d63a-e8dc-4f58-b677-507491ed46de / ext4 defaults 0 1
# /boot/efi was on /dev/nvme0n1p1 during curtin installation
/dev/disk/by-uuid/255C-50C9 /boot/efi vfat defaults 0 1
/swap.img none swap sw 0 0
/dev/md0 /mnt/plex ext4 defaults,nofail,discard 0 0
#UUID=489c654c-58e8-4187-b478-b37bc6af81f9 /mnt/storage auto defaults,x-parent=f87a9a2f:b87b822b:60dc9e96:9d59d84f 0 0
#UUID=489c654c-58e8-4187-b478-b37bc6af81f9 /mnt/storage auto defaults,x-parent=f87a9a2f:b87b822b:60dc9e96:9d59d84f 0 0
如果我不取消註釋最後兩行，我會得到以下內容等待設備超時
答案1
您無法將兩個磁碟機安裝到同一安裝點。例如，您需要將磁碟 1 安裝到 /mnt/storage1，將磁碟 2 安裝到 /mnt/storage2。確保這些目錄存在於檔案系統中