☰

如何在 Linux 上使用我自己的 pptp vpn 伺服器在 Windows 用戶端開啟連接埠？

tag-icon • tag-icon server vpn iptables port-forwarding pptpd
如何在 Linux 上使用我自己的 pptp vpn 伺服器在 Windows 用戶端開啟連接埠？

我已經pptpd在我的vultr ubuntu 伺服器中設定了自己的伺服器，並使用Windows 中內建的客戶端連接它，我成功存取互聯網，當我檢查我的ip 時，我看到的是vps ip 而不是我的真實ip，但我的問題是，當我嘗試使用名為 的簡單工具在 Windows 用戶端中開啟連接埠portlistener並開始偵聽連接埠 80 時，我去了 checkport 工具，但我看到連接埠 80 已關閉。那麼有人知道如何在我的客戶端使用這個連接埠嗎？

我的ifconfig命令顯示這個：

root@vultr:~# ifconfig
ens3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 104.238.191.125  netmask 255.255.254.0  broadcast 104.238.191.255
        inet6 fe80::5400:2ff:feec:61e8  prefixlen 64  scopeid 0x20<link>
        ether 56:00:02:ec:61:e8  txqueuelen 1000  (Ethernet)
        RX packets 3383  bytes 984017 (960.9 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 3470  bytes 897643 (876.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens7: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1450
        inet 10.24.96.3  netmask 255.255.0.0  broadcast 10.24.255.255
        inet6 fe80::5800:2ff:feec:61e8  prefixlen 64  scopeid 0x20<link>
        ether 5a:00:02:ec:61:e8  txqueuelen 1000  (Ethernet)
        RX packets 3  bytes 370 (370.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 225  bytes 9910 (9.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1396
        inet 10.24.96.3  netmask 255.255.255.255  destination 10.24.96.5
        ppp  txqueuelen 3  (Point-to-Point Protocol)
        RX packets 340  bytes 45323 (44.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 183  bytes 47486 (46.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

iptables -L命令顯示：

root@vultr:~# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     gre  --  anywhere             anywhere
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:1723 state NEW

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
TCPMSS     tcp  --  10.0.0.0/24          anywhere             tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

相關內容