華為 E8372h-927 數據機配置在 Ubuntu 14.04 lts 上不起作用

Question

1. 我在 Ubuntu 14.04 上使用寬頻數據機 (Huawei E8372h-927) 時遇到問題。我已經為（華為E8372h-927）安裝了潛水員，安裝過程如下：

   1. 安裝

      A。僅安裝 Linux 驅動程式工具：

      call the following command in the installation directory:
      ./install $PATH (The parameter "PATH" is where the driver directory is)
      And the can copy usbmod file to /sbin/
           copy startMobilePartner file to /sbin/
           copy 10-Huawei-Datacard.rules file to /etc/udev/rules.d/
           register the auto run settengs into the current system.
      To make the settings applied, you must restart the system.
      

      b.要將 Linux 驅動程式工具整合到第三個儀表板應用程式中：

      call "install norestart" in the installation tool of the third dashboard application. 
      This call scheme will disable the restarting function in the tool installation.
      And after the third dashboard application installed, its installation tool must restart the current system.
      

   2. 如需查詢 Linux Driver 工具的版本，請致電HWActivator --version。

   3. 目前版本是：Linux 驅動程式 4.19.19.00

且之後dmesg不顯示為已連接到 USB。這就是為什麼當我撥打 wvdialconf /etc/wvdial.conf 命令時它顯示未找到調變解調器..

請更新我的情況。