Apache Virtualhost Port 443 stellt Inhalte aus der Port 80-Konfiguration bereit

Question

Ich verwende Apache 2.4.52 auf Ubuntu Server 22.04. Ich versuche, https über Port 443 auszuführen, mit dem Ziel, letztendlich eine Umleitung von Port 80 zu erreichen, um Inhalte auf https zu erzwingen. Apache scheint jedoch das DocumentRoot aus der Port-80-Konfiguration zu verwenden, obwohl der Browser eine Verbindung zur https-URL herstellt und das richtige SSL-Zertifikat erhält.

Zum Beispiel:

<VirtualHost *:80>

        ServerName [mydomain]
        ServerAlias [www.mydomain]
        DocumentRoot /var/www/testpage1/

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        #RewriteEngine On
        #RewriteCond %{HTTPS} off
        #RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI}
        #Redirect permanent / https://[mydomain]

</VirtualHost>

<VirtualHost *:443>

        ServerName [mydomain]
        ServerAlias [www.mydomain]
        DocumentRoot /var/www/testpage2/
        
        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        SSLEngine on
        SSLCertificateFile /etc/letsencrypt/live/[mydomain]/fullchain.pem
        SSLCertificateKeyFile /etc/letsencrypt/live/[mydomain]/privkey.pem

</VirtualHost>

führt dazu, dass die index.html von „/var/www/testpage1/“ statt von testpage2 angezeigt wird.

---

Wenn ich an dieser Stelle entweder

#RewriteEngine On
#RewriteCond %{HTTPS} off
#RewriteRule ^ https://%{HTTP_HOST}%{REQUEST_URI}

oder

#RewriteEngine On
#Redirect permanent / https://[mydomain]

es kommt nur mit "ERR_TOO_MANY_REDIRECTS"

Wenn ich DocumentRoot in der Port-80-Konfiguration auskommentiere, gelange ich sowohl über die http- als auch die https-URL zur Standardkonfigurationsseite von Apache.

Und wenn ich den Servernamen und den Serveralias in der Konfiguration 80 oder 443 auskommentiere, gelange ich in beiden Fällen immer noch zu Testseite1.

---

meine ports.conf in /etc/apache2/ sieht folgendermaßen aus:

Listen 80

<IfModule ssl_module>
        Listen 443
</IfModule>

<IfModule mod_gnutls.c>
        Listen 443
</IfModule>

Ich habe überprüft, ob das SSL-Modul aktiviert ist

In den Apache-Fehlerprotokollen gibt es eine Warnung AH01909 „Serverzertifikat enthält KEINE ID, die mit dem Servernamen übereinstimmt“. Könnte das ein Problem sein oder gibt es noch etwas, das ich übersehe?

Vielen Dank für jede Hilfe.

---

bearbeiten: meine apache2.conf in /etc/apache2/ lautet wie folgt:

# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
#   /etc/apache2/
#   |-- apache2.conf
#   |   `--  ports.conf
#   |-- mods-enabled
#   |   |-- *.load
#   |   `-- *.conf
#   |-- conf-enabled
#   |   `-- *.conf
#   `-- sites-enabled
#       `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#   together by including all remaining configuration files when starting up the
#   web server.
#
# * ports.conf is always included from the main configuration file. It is
#   supposed to determine listening ports for incoming connections which can be
#   customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#   directories contain particular configuration snippets which manage modules,
#   global configuration fragments, or virtual host configurations,
#   respectively.
#
#   They are activated by symlinking available configuration files from their
#   respective *-available/ counterparts. These should be managed by using our
#   helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#   their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#   the default configuration, apache2 needs to be started/stopped with
#   /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#   work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
#ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#Mutex file:${APACHE_LOCK_DIR} default

#
# The directory where shm and other runtime files will be stored.
#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
Include ports.conf


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Require all denied
</Directory>

<Directory /usr/share>
    AllowOverride None
    Require all granted
</Directory>

<Directory /var/www/>
    Options Indexes FollowSymLinks
    AllowOverride None
    Require all granted
</Directory>

#<Directory /srv/>
#   Options Indexes FollowSymLinks
#   AllowOverride None
#   Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
    Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
ServerName 192.168.0.51

Answer 1

So dumm es auch scheint und nach wochenlangen Kopfschmerzen stellt sich heraus, dass ich einfach keinen HTTPS-Verkehr durch meine Firewall zugelassen habe.

Als ich meine Site über Cloudflare proxied, dachte ich, das richtige SSL-Zertifikat sei in Wirklichkeit das Cloudflare Edge-Zertifikat. Da der SSL/TLS-Verschlüsselungsmodus nicht streng eingestellt war, wurde die von Cloudflare von meinem Server angeforderte Site zwar immer noch über Port 80 bereitgestellt, aber der Datenverkehr zwischen meinem Browser und Cloudflare war immer noch verschlüsselt, sodass er in meinem Browser immer noch als https angezeigt wurde.

sudo ufw allow 'Apache Full'und das Einstellen des Verschlüsselungsmodus auf „streng“ hat letztendlich alle Probleme behoben.